EN ISO 8385-2018 Ships and marine technology - Dredgers - Classification.pdf

《EN ISO 8385-2018 Ships and marine technology - Dredgers - Classification.pdf》由会员分享，可在线阅读，更多相关《EN ISO 8385-2018 Ships and marine technology - Dredgers - Classification.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Ships and marine technology - Dredgers - ClassificationBS EN ISO 8385:2018National forewordThis British Standard is the UK implementation of EN ISO 8385:2018. It is identical to ISO 8385:2018. It supersedes BS EN ISO 83

2、85:1999, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee SME/32, Ships and marine technology - Steering committee.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to inc

3、lude all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 97126 6ICS 47.060; 47.040Compliance with a British Standard cannot confer immunity from legal obligations.T

4、his British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN ISO 8385:2018EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN ISO 8385May 2018ICS 47.060 Superse

5、des EN ISO 8385:1999EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGCEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2018 CEN Ref. No. EN ISO 8385:2018: EAll rights of exploitation in any form and by any means reserved worldwide for C

6、EN national MembersShips and marine technology - Dredgers - Classification (ISO 8385:2018)Navires et technologie maritime - Dragues - Classification (ISO 8385:2018)Schiffe und Meerestechnik - Schwimmbagger - Klassifizierung (ISO 8385:2018)This European Standard was approved by CEN on 8 May 2018.CEN

7、members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on appli

8、cation to the CEN-CENELEC Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Mana

9、gement Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia

10、, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.English VersionEN ISO 8385:2018 (E)European forewordThis document (EN ISO 8385:2018) has been prepared by Technical Committee ISO/TC 8 “Sh

11、ips and marine technology“ in collaboration with Technical Committee CEN/TC 15 “Inland navigation vessels”, the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by

12、November 2018, and conflicting national standards shall be withdrawn at the latest by November 2018.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights.Th

13、is document supersedes EN ISO 8385:1999.According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yug

14、oslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.Endorsement noticeThe text of ISO 8385:2

15、018 has been approved by CEN as EN ISO 8385:2018 without any modification.2BS EN ISO 8385:2018ISO 8385:2018Foreword iv1 Scope . 12 Normative references 13 Terms and definitions . 14 Classification 1 ISO 2018 All rights reserved iiiContents PageBS EN ISO 8385:2018ISO 8385:2018ForewordISO (the Interna

16、tional Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has be

17、en established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical stan

18、dardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accorda

19、nce with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details o

20、f any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorse

21、ment.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following UR

22、L: www.iso.org/iso/foreword.html.This document was prepared by Technical Committee ISO/TC 8, Ships and marine technology, Subcommittee SC 7, Inland navigation vessels.This third edition cancels and replaces the second edition (ISO 8385:1999), which has been technically revised.The main changes compa

23、red to the previous edition are as follows: two new categories of criteria: 3 “Main performance parameters” and 5 “Energy source” have been added; Liquefied Natural Gas (LNG) has been added to category of criteria 5 “Energy source”; category of criteria 9 “Method of soil extraction” has been revised

24、 and new items have been added; category of criteria 13 “Disposal/transport of dredged material” has been revised; the original classification table has been separated into three tables respectively on the basis of the engineering condition, dredger parameters and operating method; the order of the

25、classification has been adjusted.iv ISO 2018 All rights reservedBS EN ISO 8385:2018Ships and marine technology - Dredgers - Classification1 ScopeThis document provides a single classification for all types of dredgers designed for loosening, raising, transporting and disposing of dredged material.2

26、Normative referencesThe following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including an

27、y amendments) applies.ISO 8384, Ships and marine technology Dredgers Vocabulary3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 8384 apply.ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electrop

28、edia: available at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.iso.org/obp4 ClassificationDredgers are classified on the basis of the criteria: engineering condition, dredger parameters and operating method as specified in Tables 1, 2 and 3.Table 1 Classification

29、 on basis of engineering conditionCategory of engineering condition Engineering condition1 Area of operation1.1 Inland waterways, inland ports and sites for soil extraction1.2 Seagoing1.2.1 Harbours and coastal zone1.2.2 Offshore1.2.3 Ocean-going1.3 Special environments1.3.1 Tropical1.3.2 Arctic1.3.

30、3 Other special environments2 Soil characteristics2.1 Silts2.2 Peats and organic soils2.3 Sands2.4 Gravels2.5 Clays2.6 Boulders and cobbles2.7 Rocks2.8 Mixed soils2.9 Fine sedimentsINTERNATIONAL STANDARD ISO 8385:2018 ISO 2018 All rights reserved 1BS EN ISO 8385:2018ISO 8385:2018Table 2 Classificati

31、on on basis of dredger parametersCategory of dredger parameters Dredger parameters3 Main performance parameters3.1 Trailing suction hopper dredger3.1.1 Hopper capacity3.1.2 Dredging depth3.1.3 Total installed power3.2 Cutter suction dredger3.2.1 Cutter head power3.2.2 Dimension of discharge pipeline

32、3.2.3 Dredging depth3.2.4 Total installed power3.3 Grab dredger3.3.1 Grab capacity3.3.2 Dredging depth3.3.3 Total installed power3.4 Dipper/Backhoe dredger3.4.1 Backhoe capacity3.4.2 Dredging depth3.4.3 Total installed power3.5 Bucket chain dredger3.5.1 Bucket capacity3.5.2 Dredging depth3.5.3 Total

33、 installed power4 Power plant4.1 Diesel4.2 Electric4.3 Diesel-electric4.4 Diesel-hydraulic4.5 Electric hydraulic4.6 Combinations5 Energy source5.1 Fuels5.1.1 Oil fuel5.1.2 LNG (Liquefied Natural Gas) and CNG (Compressed Natural Gas)5.1.3 Other burnable fuels5.2 Clean energy5.2.1 Electric, (onboard,

34、outboard or onshore)5.2.2 Solar5.2.3 Wind5.3 Nuclear6 Mobility6.1 Non-propelled6.2 Self-propelled6.3 With limited propulsive capabilities7 Transportability7.1 Non-dismountable7.2 Partly dismountable7.3 Dismountable8 Crew quarters8.1 Without crew accommodation8.2 With day accommodation8.3 With sleepi

35、ng accommodation2 ISO 2018 All rights reservedBS EN ISO 8385:2018ISO 8385:2018Table 3 Classification on basis of operating methodCategory of operating method Operating method9 Method of soil extraction9.1 Single bucket dredgers9.1.1 Dipper dredgers9.1.2 Backhoe dredgers9.2 Grab dredgers9.2.1 Single

36、grab dredgers9.2.2 Multi-grab dredgers9.2.3 Dragline dredgers9.2.4 Grab hopper dredgers9.3 Bucket dredgers9.4 Rockbreakers9.4.1 With freely falling chisel9.4.2 With powered chisel9.4.3 With drilling for blasting9.5 Bed levellers9.6 Agitation dredgers9.7Suction dredgers9.7.1Type of dredge pump9.7.1.1

37、 Centrifugal pump9.7.1.2 Ejector jet pump9.7.1.3 Air lift pump9.7.1.4 Pneumatic suction pump9.7.1.5 Axial flow pump9.7.1.6 Combinations and special9.7.2Method of loosening soil9.7.2.1 Cutter head9.7.2.2 Bucket wheel/cutting wheel9.7.2.3 Hydraulic agitator9.7.2.4 Combinations and special9.7.3Type of

38、suction head9.7.3.1 Forward suction head9.7.3.2 Draghead9.7.3.3 Combinations and special10 Location of dredging apparatus10.1 At one side10.2 At both sides10.3 In a well10.3.1 Fore10.3.2 Aft10.4 On deck10.4.1 Fore10.4.2 Aft11 Operating movements11.1 Longitudinal11.1.1 Ahead11.1.2 Astern11.2 Traversi

39、ng or lateral/arc11.3 Combinations and special12 Equipment for movement and propulsion12.1 Propellers or other propulsive devices12.2 Anchors12.3 Spuds12.4 Combinations and special ISO 2018 All rights reserved 3BS EN ISO 8385:2018ISO 8385:2018Category of operating method Operating method13 Disposal/

40、transport of dredged material13.1 Direct delivery13.2 Hydraulic delivery13.2.1 Land pipeline13.2.2 Floating pipeline13.2.3 Submersible pipeline13.3 Hopper dredgers13.3.1 Bottom doors or valves13.3.2 Split hull13.3.3 Other means of disposal13.3.4 Shore discharging13.3.5 Rainbowing13.4 Vessel13.5 Chut

41、e13.6 Belt conveyor13.7 Combinations4 ISO 2018 All rights reservedBS EN ISO 8385:2018This page deliberately left blankThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorp

42、orated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)About usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into sta

43、ndards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can pr

44、ovide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopte

45、d European and international standards, through our website at where hard copies can also be purchased.If you need international and foreign standards from other Standards Development Organizations, hard copies can be ordered from our Customer Services team.Copyright in BSI publicationsAll the cont

46、ent in BSI publications, including British Standards, is the property of and copyrighted by BSI or some person or entity that owns copyright in the information used (such as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use

47、.Save for the provisions below, you may not transfer, share or disseminate any portion of the standard to any other person. You may not adapt, distribute, commercially exploit, or publicly display the standard or any portion thereof in any manner whatsoever without BSIs prior written consent.Storing

48、 and using standardsStandards purchased in soft copy format: A British Standard purchased in soft copy format is licensed to a sole named user for personal or internal company use only. The standard may be stored on more than 1 device provided that it is accessible by the sole named user only and th

49、at only 1 copy is accessed at any one time. A single paper copy may be printed for personal or internal company use only. Standards purchased in hard copy format: A British Standard purchased in hard copy format is for personal or internal company use only. It may not be further reproduced in any format to create an additional copy. This includes scanning of the document.If you need more than 1 copy of the document, or if you wish to share the document on an internal network, you can save mon