EN IEC 62453-303-1-2009 Field device tool (FDT) interface specification Part 303-1 Communication profile integration IEC 61784 CP 3 1 and CP 3 2 (Incorporates A.pdf

《EN IEC 62453-303-1-2009 Field device tool (FDT) interface specification Part 303-1 Communication profile integration IEC 61784 CP 3 1 and CP 3 2 (Incorporates A.pdf》由会员分享，可在线阅读，更多相关《EN IEC 62453-303-1-2009 Field device tool (FDT) interface specification Part 303-1 Communication profile integration IEC 61784 CP 3 1 and CP 3 2 (Incorporates A.pdf（64页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Field device tool (FDT) interface specificationPart 303-1: Communication profile integration - IEC 61784 CP 3/1 and CP 3/2BS EN IEC 62453-303-1:2009+A1:2018National forewordThis British Standard is the UK implementation

2、 of EN IEC 62453-303-1:2009+A1:2018. It is identical to IEC 62453-303-1:2009, incorporating amendment 1:2016. It supersedes BS EN 62453-303-1:2009, which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to IEC text

3、 carry the number of the IEC amendment. For example, text altered by IEC amendment A1 is indicated by .The UK participation in its preparation was entrusted to Technical Committee AMT/7, Industrial communications: process measurement and control, including fieldbus.A list of organizations represente

4、d on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 855

5、19 1ICS 35.100.05; 35.110; 25.040.40Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2010.Amendments/corrigenda issued since publicationDate Text affec

6、ted31 March 2018 Implementation of IEC amendment 1:2016 with CENELEC endorsement A1:2018BRITISH STANDARDBS EN IEC 62453-303-1:2009+A1:2018EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN IEC 62453-303-1:2009 +A1February 2018ICS 25.040; 35.100.05; 35.110CEN-CENELEC Management Centre: Avenue Marnix 1

7、7, B-1000 Brussels 2017 CENELEC Ref. No. EN IEC 62453-303-1:2009+A1:2018: EAll rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.Field device tool (FDT) interface specification Part 303-1: Communication profile integration IEC 61784 CP 3/1 and CP 3/2 (IEC 624

8、53-303-1:2009)Spcification des interfaces des outils des dispositifs de terrain (FDT) Partie 303-1: Intgration des profils de communication CEI 61784 CP 3/1 et CP 3/2 (IEC 62453-303-1:2009)Field Device Tool (FDT)-Schnittstellenspezifikation Teil 303-1: Integration von Kommunikationsprofilen Kommunik

9、ationsprofile (CP) 3/1 und 3/2 nach IEC 61784 (IEC 62453-303-1:2009)This European Standard was approved by CENELEC on 2009-08-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national st

10、andard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.This European Standard exists in three official versions (English, French, German). A version in any oth

11、er language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republ

12、ic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.English VersionEN IEC 62453-303-1:2009+A1:2018 (E)

13、European forewordThe text of document 65E/127/FDIS, future edition 1 of IEC 62453-303-1, prepared by SC 65E, Devices and integration in enterprise systems, of IEC TC 65, Industrial-process measurement, control and automation, was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as

14、EN 62453-303-1 on 2009-08-01.Each part of the EN 62453-3xy series is intended to be read in conjunction with EN 62453-2.The following dates were fixed: latest date by which the EN has to be implemented at nation-al level by publication of an identical national standard or by endorsement(dop) 2010-05

15、-01 latest date by which the national standards conflicting with the EN have to be withdrawn(dow) 2012-08-01Annex ZA has been added by CENELEC.Endorsement noticeThe text of the International Standard IEC 62453-303-1:2009 was approved by CENELEC as a European Standard without any modification.In the

16、official version, for Bibliography, the following notes have to be added for the standards indicated:5 IEC 61158-6 NOTE Harmonized as EN 61158-6:2004 (not modified).7 IEC 61158-5 NOTE Harmonized as EN 61158-5:2004 (not modified).Foreword to amendment A1The text of document 65E/336/CDV, future editio

17、n IEC 62453-303-1:2009/A1, prepared by subcommittee 65E: Devices and integration in enterprise systems, of IEC technical committee 65: Industrial-process measurement, control and automation was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 62453-303-1:2009/A1:2018.The

18、following dates are fixed: latest date by which the document has to be implemented atnational level by publication of an identical national standardor by endorsement(dop) 2018-08-02 latest date by which the national standards conflicting with the document have to be withdrawn(dow) 2021-02-02Attentio

19、n is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.Endorsement noticeThe text of the International Standard IEC 62453-303-1:2009/A1:2018 was approved by CENE

20、LEC as a European Standard without any modification.2BS EN IEC 62453-303-1:2009+A1:2018EN IEC 62453-303-1:2009+A1:2018 (E)Annex ZA (normative) Normative references to international publications with their corresponding European publicationsThe following documents are referred to in the text in such

21、a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.NOTE 1 Where an International Publication has been modifie

22、d by common modifications, indicated by (mod), the relevant EN/HD applies.NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu.Publication Year Title EN/HD YearIEC 61131-3 2003 Programmable controllers - Part 3: Program

23、ming languagesEN 61131-3 2003IEC 61158 Series Industrial communication networks -Fieldbus spec-ificationsEN 61158 SeriesIEC 61158-2 2014 Industrial communication networks - Fieldbus spec-ifications - Part 2: Physical layer specification and service definitionEN 61158-2 2014IEC 61158-3-3 - Industrial

24、 communication networks - Fieldbus spec-ifications - Part 3-3: Data-link layer service defini-tion - Type 3 elementsEN 61158-3-3 2008IEC 61158-4-3 - Industrial communication networks - Fieldbus specifications - Part 4-3: Data-link layer protocol specification - Type 3 elementsEN 61158-4-3 2008IEC 61

25、158-5-3 - Industrial communication networks - Fieldbus specifications - Part 5-3: Application layer service definition - Type 3 elementsEN 61158-5-3 2008IEC 61158-6-3 - Industrial communication networks - Fieldbus specifications - Part 6-3: Application layer protocol specification - Type 3 elementsE

26、N 61158-6-3 2008IEC 61784-1 - Industrial communication networks - Profiles - Part 1: Fieldbus profilesEN 61784-1 2008IEC 62453-1 2009 Field device tool (FDT) interface specification - Part 1: Overview and guidanceEN 62453-1 2009IEC 62453-2 2009 Field device tool (FDT) interface specification - Part

27、2: Concepts and detailed descriptionEN 62453-2 20093BS EN IEC 62453-303-1:2009+A1:2018FOREWORD .6INTRODUCTION 81 Scope .12 Normative references 13 Terms, definitions, symbols, abbreviated terms and conventions .23.1 Terms and definitions .23.2 Symbols and abbreviated terms.23.3 Conventions . 33.3.1

28、Data type names and references to data types 33.3.2 Vocabulary for requirements 33.3.3 Use of UML 34 Bus category 35 Access to instance and device data 45.1 Process Channel objects provided by DTM 45.2 DTM services to access instance and device data .46 Protocol specific behavior 46.1 PROFIBUS devic

29、e model .46.2 Configuration and parameterization of PROFIBUS devices .56.2.1 General56.2.2 Monolithic DTM for a modular PROFIBUS device .66.2.3 Modular DTM for a modular PROFIBUS device .66.3 Support for DPV0 configuration 76.4 PROFIBUS slaves operating without a cyclic PROFIBUS master 76.5 PROFIBUS

30、-related information of a slave DTM 76.5.1 General76.5.2 Bus Master Configuration Part (BMCP) .87 Protocol specific usage of general data types 188 Protocol specific common data types 209 Network management data types 219.1 General 219.1.1 Configuration .219.1.2 Process Channel .219.1.3 Parameteriza

31、tion 229.2 Master-bus parameter set 229.3 Slave bus parameter set .239.4 Module and channel data 239.5 GSD information .259.5.1 General.259.5.2 GSD for gateway devices 2610 Communication data types .2710.1 General 2710.2 Error information provided by Communication Channel .2710.3 DPV0 communication

32、2710.4 DPV1 communication 3311 Channel parameter data types 3612 Device identification3912.1 General 3912.2 Protocol specific handling of the data type STRING 3912.3 Common device type identification data types 39IEC 62453-303-1:2009+A1:20164 ISO 2018 All rights reservedContents PageBS EN IEC 62453-

33、303-1:2009+A1:201812.4 Topology scan data types 4312.5 Scan identification data types .4312.6 Device type identification data types provided by DTM 4712.7 Identification information in GUI .5013 ProfiSafe .5013.1 Motivation 5013.2 General parameter handling 5113.3 ProfiSafe individual device paramet

34、er 51Bibliography .53IEC 62453-303-1:2009+A1:2016 ISO/CIE 2018 All rights reserved 5BS EN IEC 62453-303-1:2009+A1:2018FOREWORD1) The International Electrotechnical Commission (IEC) is a worldwide organization forstandardization comprising all national electrotechnical committees (IEC National Commit

35、tees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Availab

36、le Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organ

37、izations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical m

38、atters express, as nearly as possible,an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted byIEC Nation

39、al Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IE

40、C National Committees undertake to applyIEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself

41、 does not provide any attestation of conformity. Independent certification bodies provideconformity assessment services and, in some areas, access to IEC marks of conformity. IEC is notresponsible for any services carried out by independent certification bodies.6) All users should ensure that they h

42、ave the latest edition of this publication.7) No liability shall attach to IEC or its directors, employees, servants or agents including individualexperts and members of its technical committees and IEC National Committees for any personalinjury, property damage or other damage of any nature whatsoe

43、ver, whether direct or indirect, orfor costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon,this IEC Publication or any other IEC Publications.8) Attention is drawn to the Normative references cited in this publication. Use of the referencedpublications

44、is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be thesubject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights.International Standard IEC

45、62453-303-1 been prepared by subcommittee 65E: Devices and integration in enterprise systems, of IEC technical committee 65: Industrial-process measurement, control and automation.Each part of the IEC 62453-3xy series is intended to be read in conjunction with IEC 62453-2.The French version of this

46、standard has not been voted upon.This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.A list of all parts of the IEC 62453 series, under the general title Field Device Tool (FDT) interface specification, can be found on the IEC website.6BS EN IEC 62453-303-1:2009+A1:20

47、18IEC 62453-303-1:2009+A1:2016The committee has decided that the contents of the base publication and its amendment will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publicatio

48、n will be reconfirmed, withdrawn, replaced by a revised edition, or amended.7BS EN IEC 62453-303-1:2009+A1:2018IEC 62453-303-1:2009+A1:2016INTRODUCTIONThis part of IEC 62453 is an interface specification for developers of FDT (Field Device Tool) components for function control and data access within

49、 a client/server architecture. The specification is a result of an analysis and design process to develop standard interfaces to facilitate the development of servers and clients by multiple vendors that need to interoperate seamlessly.With the integration of fieldbusses into control systems, there are a few other tasks which need to be performed. In addition to fieldbus- and device-specific tools, there is a need to integrate these tools into higher-level system-wide planning- or engineering tools. In particular, for use in extensive and heteroge