ISO IEC TR 20004-2015 Information technology - Security techniques - Refining software vulnerability analysis under ISO IEC 15408 and ISO IEC 18045《信息技术 安全技术 IS.pdf

《ISO IEC TR 20004-2015 Information technology - Security techniques - Refining software vulnerability analysis under ISO IEC 15408 and ISO IEC 18045《信息技术 安全技术 IS.pdf》由会员分享，可在线阅读，更多相关《ISO IEC TR 20004-2015 Information technology - Security techniques - Refining software vulnerability analysis under ISO IEC 15408 and ISO IEC 18045《信息技术 安全技术 IS.pdf（24页珍藏版）》请在麦多课文档分享上搜索。

1、Information technology Security techniques Refining software vulnerability analysis under ISO/IEC 15408 and ISO/IEC 18045 Technologies de linformation Techniques de scurit Redfinition de lanalyse de vulnrabilit de logiciel selon lISO/CEI 15408 et lISO/CEI 18045 TECHNICAL REPORT ISO/IEC TR 20004 Seco

2、nd edition 2015-12-15 Reference number ISO/IEC TR 20004:2015(E) ISO/IEC 2015 ii ISO/IEC 2015 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2015, Published in Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in

3、 any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Ch. de

4、Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.org ISO/IEC TR 20004:2015(E) ISO/IEC TR 20004:2015(E)Foreword iv Introduction v 1 Scope . 1 2 Terms and definitions . 1 3 Abbreviated terms 3 4 Background context 4 5 Vulnerab

5、ility assessment activities 8 5.1 Determine relevant potential vulnerabilities . 9 5.1.1 Identify relevant weaknesses and attack patterns from existing structured assurance case 11 5.1.2 Identify relevant weaknesses and attack patterns from public sources 11 5.2 Assess TOE susceptibility to attack 1

6、4 5.2.1 Design and specify security/penetration testing .14 5.2.2 Execute and document security/penetration testing .15 5.3 Report on exploitable vulnerabilities .15 Bibliography .17 ISO/IEC 2015 All rights reserved iii Contents Page ISO/IEC TR 20004:2015(E) Foreword ISO (the International Organizat

7、ion for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respect

8、ive organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information

9、 technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different ty

10、pes of document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall no

11、t be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade name used in this document is in

12、formation given for the convenience of users and does not constitute an endorsement. For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) se

13、e the following URL: Foreword - Supplementary information The committee responsible for this document is ISO/IEC JTC 1, Information technology, Subcommittee SC 27, IT Security techniques. This second edition cancels and replaces the first edition (ISO/IEC/TR 20004:2012), which has been technically r

14、evised.iv ISO/IEC 2015 All rights reserved ISO/IEC TR 20004:2015(E) Introduction This Technical Report is intended to provide added refinement, detail and guidance to the vulnerability analysis activities outlined in ISO/IEC 18045:2008 for the software elements of a TOE. Specifically, it is intended

15、 to add refinement and clarification of the “Potential vulnerability identification from public sources” (AVA_VAN.1.2E/2.2E/3.2E/4.2E) and “Penetration testing” (AVA_VAN.1.3E/2.4E/3.4E/4.4E) evaluator actions, which are currently imprecise in regards to searching for, identifying and testing relevan

16、t potential vulnerabilities. This Technical Report provides guidance on an approach to objectively search for, identify, filter and test potential vulnerabilities utilizing international ad hoc standard resources for software weaknesses and attack patterns. The set of relevant software weaknesses an

17、d attack patterns identified through this guidance represent a minimal set for analysis under the AVA_VAN assurance family in an ISO/IEC 15408 evaluation. Additional weaknesses and attack patterns may be determined relevant by specific national schemes, technical communities, associated protection p

18、rofiles or other sources. In utilizing these standard structured resources, the approach defined here has the added benefit of being equally applicable to the TOE development process as it does to the TOE security evaluation process. This means that relevant weaknesses and attack patterns identified

19、 and tested for during development, whether defined ad hoc or as part of a structured assurance case, can provide a head start template for a TOE-specific set of relevant weaknesses and attack patterns for use in the security evaluation. This Technical Report is intended to be used in conjunction wi

20、th and, as an addendum to, ISO/IEC 18045. This Technical Report does not address all possible vulnerability analysis methods, in particular those that fall outside the scope of the activities outlined in ISO/IEC 18045. It uses the common weakness enumeration (CWE) and the common attack pattern enume

21、ration and classification (CAPEC) to identify possible attacks. It does not preclude the use of other appropriate identification resources by evaluators. The target audience for this Technical Report is evaluators applying ISO/IEC 15408 and certifiers confirming evaluator actions, developers, PP/ST

22、authors (to include Technical Communities), evaluator sponsors and other parties interested in IT security. This Technical Report recognizes that not all questions concerning IT security evaluation will be answered herein and that further interpretations will be needed. Individual schemes will deter

23、mine how to handle such interpretations and other guidance, although these can be subject to mutual recognition agreements. ISO/IEC 2015 All rights reserved v Information technology Security techniques Refining software vulnerability analysis under ISO/IEC 15408 and ISO/IEC 18045 1 Scope This Techni

24、cal Report refines the AVA_VAN assurance family activities defined in ISO/IEC 18045 and provides more specific guidance on the identification, selection and assessment of relevant potential vulnerabilities in order to conduct an ISO/IEC 15408 evaluation of a software target of evaluation. This Techn

25、ical Report leverages publicly available information security resources to support the method of scoping and implementing ISO/IEC 18045 vulnerability analysis activities. The Technical Report currently uses the common weakness enumeration (CWE) and the common attack pattern enumeration and classific

26、ation (CAPEC), but does not preclude the use of any other appropriate resources. Furthermore, this Technical Report is not meant to address all possible vulnerability analysis methods, including those that fall outside the scope of the activities outlined in ISO/IEC 18045. This Technical Report does

27、 not define evaluator actions for certain high assurance ISO/IEC 15408 components, where there is as yet no generally agreed guidance. 2 Terms and definitions For the purposes of this document, the following terms and definitions apply. 2.1 assurance case structured set of claims, arguments and a co

28、rresponding body of evidence to demonstrate that a system satisfies specific claims with respect to its security properties 2.2 attack pattern abstracted approach utilized to attack software 2.3 attack potential measure of the effort to be expended in attacking a TOE, expressed in terms of an attack

29、ers expertise, resources and motivation SOURCE: ISO/IEC 15408-1:2009, 3.1.5 2.4 confirm declare that something has been reviewed in detail with an independent determination of sufficiency Note 1 to entry: The level of rigour required depends on the nature of the subject matter. This term is only app

30、lied to evaluator actions. SOURCE: ISO/IEC 15408-1:2009, 3.1.14 2.5 CVE vulnerability vulnerability listed in CVE TECHNICAL REPORT ISO/IEC TR 20004:2015(E) ISO/IEC 2015 All rights reserved 1 ISO/IEC TR 20004:2015(E) 2.6 determine affirm a particular conclusion based on independent analysis with the

31、objective of reaching a particular conclusion Note 1 to entry: The usage of this term implies a truly independent analysis, usually in the absence of any previous analysis having been performed. Compare with the terms “confirm” or “verify” which imply that an analysis has already been performed whic

32、h needs to be reviewed. SOURCE: ISO/IEC 15408-1:2009, 3.1.22 2.7 encountered potential vulnerabilities potential weakness in the TOE identified by the evaluator while performing evaluation activities that could be used to violate the SFRs SOURCE: ISO/IEC 15408-1:2009, 3.5.2 2.8 evaluation assessment

33、 of a PP, an ST or a TOE, against defined criteria SOURCE: ISO/IEC 15408-1:2009, 3.1.26 2.9 exploitable vulnerability weakness in the TOE that can be used to violate the SFRs in the operational environment for the TOE SOURCE: ISO/IEC 15408-1:2009, 3.5.3 2.10 potential vulnerability suspected, but no

34、t confirmed, weakness Note 1 to entry: Suspicion is by virtue of a postulated attack path to violate the SFRs. SOURCE: ISO/IEC 15408-1:2009, 3.5.5 2.11 Protection Profile implementation-independent statement of security needs for a TOE type SOURCE: ISO/IEC 15408-1:2009, 3.1.52 2.12 residual vulnerab

35、ility weakness that cannot be exploited in the operational environment for the TOE, but that could be used to violate the SFRs by an attacker with greater attack potential than is anticipated in the operational environment for the TOE SOURCE: ISO/IEC 15408-1:2009, 3.5.6 2.13 Security Target implemen

36、tation-dependent statement of security needs for a specific identified TOE SOURCE: ISO/IEC 15408-1:2009, 3.1.63 2.14 selection specification of one or more items from a list SOURCE: ISO/IEC 15408-1:2009, 3.1.642 ISO/IEC 2015 All rights reserved ISO/IEC TR 20004:2015(E) 2.15 target of evaluation set

37、of software, firmware and/or hardware possibly accompanied by guidance SOURCE: ISO/IEC 15408-1:2009, 3.1.70 2.16 threat agent entity that can adversely act on assets SOURCE: ISO/IEC 15408-1:2009, 3.1.71 2.17 TOE evaluation assessment of a TOE against defined criteria SOURCE: ISO/IEC 15408-1:2009, 3.

38、1.72 2.18 TOE-relevant CVE vulnerabilities CVE vulnerabilities from all versions of the TOE product family or CVE vulnerabilities associated with products of the same technology type 2.19 verify rigorously review in detail with an independent determination of sufficiency Note 1 to entry: Also see co

39、nfirm (2.4). The term verify has more rigorous connotations. It is used in the context of evaluator actions where an independent effort is required of the evaluator. SOURCE: ISO/IEC 15408-1:2009, 3.1.84 2.20 vulnerability weakness in the TOE that can be used to violate the SFRs in some environment S

40、OURCE: ISO/IEC 15408-1:2009, 3.5.7 2.21 weakness characteristic or property of a TOE that, in proper conditions, could contribute to the introduction of vulnerabilities within that TOE 3 Abbreviated terms The following abbreviations are used in one or more parts of ISO/IEC 20004. CAPEC a Common Atta

41、ck Pattern Enumeration and Classification CVE a Common Vulnerabilities and Exposures CWE a Common Weakness Enumeration ETR Evaluation Technical Report PP Protection Profile SAR Security Assurance Requirement SFR Security Functional Requirement ISO/IEC 2015 All rights reserved 3 ISO/IEC TR 20004:2015

42、(E) ST Security Target TOE Target of Evaluation TSF TOE Security Functionality TSFI TSF Interface aCAPEC, CVE and CWE are examples of suitable products available commercially. This infor- mation is given for the convenience of users of this document and does not constitute an endorsement by ISO of t

43、hese products. 4 Background context ISO/IEC 15408-3:2008, 15.1 defines “development vulnerabilities” as vulnerabilities which take advantage of some properties of the TOE which were introduced during its development. In the same sub-clause, ISO/IEC 15408-3 states that an assessment of development vu

44、lnerabilities is covered by the assurance family called “vulnerability analysis” (AVA_VAN). ISO/IEC 15408-3 expects this assessment to determine whether potential vulnerabilities identified could allow attackers to violate the SFRs and to deal with the threat that an attacker will be able to discove

45、r flaws as the identified potential vulnerabilities (ISO/IEC 15408-3:2008, 15.2.1). The levels in the AVA_VAN assurance family are ordered as follows: AVA_VAN.1 “vulnerability survey” (ISO/IEC 15408-3:2008, 15.2.3); AVA_VAN.2 “vulnerability analysis” (ISO/IEC 15408-3:2008, 15.2.4); AVA_VAN.3 “focuse

46、d vulnerability analysis” (ISO/IEC 15408-3:2008, 15.2.5); AVA_VAN.4 “methodical vulnerability analysis” (ISO/IEC 15408-3:2008, 15.2.6); AVA_VAN.5 “advanced methodical vulnerability analysis” (ISO/IEC 15408-3:2008, 15.2.7). AVA_VAN.1 is the lowest level and AVA_VAN.5 is the highest level in the AVA_V

47、AN assurance family. ISO/IEC 15408-3 states the following two evaluator actions for each of the AVA_VAN levels. “Potential vulnerability identification from public sources” action The evaluator shall perform a search of public domain sources to identify potential vulnerabilities in the TOE. AVA_VAN.

48、1.2E (ISO/IEC 15408-3:2008, 15.2.3.4.2); AVA_VAN.2.2E (ISO/IEC 15408-3:2008, 15.2.4.4.2); AVA_VAN.3.2E (ISO/IEC 15408-3:2008, 15.2.5.4.2); AVA_VAN.4.2E (ISO/IEC 15408-3:2008, 15.2.6.4.2); AVA_VAN.5.2E (ISO/IEC 15408-3:2008, 15.2.7.4.2). “Penetration testing” action The evaluator shall conduct penetr

49、ation testing, based on the identified potential vulnerabilities, to determine that the TOE is resistant to attacks performed by an attacker possessing. Basic attack potential” in AVA_VAN.1.3E (ISO/IEC 15408-3:2008, 15.2.3.4.3); Basic attack potential” in AVA_VAN.2.4E (ISO/IEC 15408-3:2008, 15.2.4.4.4);4 ISO/IEC 2015 All rights reserved ISO/IEC TR 20004:2015(E) Enhanced-Basic attack potential” in AVA_VAN.3.4E (ISO/IEC 15408-3:20