ISO IEC 15433-2003 Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network Inter-exchange sig.pdf

《ISO IEC 15433-2003 Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network Inter-exchange sig.pdf》由会员分享，可在线阅读，更多相关《ISO IEC 15433-2003 Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network Inter-exchange sig.pdf（58页珍藏版）》请在麦多课文档分享上搜索。

1、 Reference number ISO/IEC 15433:2003(E) ISO/IEC 2003INTERNATIONAL STANDARD ISO/IEC 15433 Second edition 2003-04-01 Information technology Telecommunications and information exchange between systems Private Integrated Services Network Inter-exchange signalling protocol Wireless Terminal Authenticatio

2、n supplementary services Technologies de linformation Tlcommunications et change dinformation entre systmes Rseau priv intgration de services Protocole de signalement dinterchange Services supplmentaires dauthentification de terminal sans fil ISO/IEC 15433:2003(E) PDF disclaimer This PDF file may co

3、ntain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsi

4、bility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation p

5、arameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. ISO/IEC 2003 All rights reserved. Unless

6、otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copy

7、right office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO/IEC 2003 All rights reservedISO/IEC 15433:2003(E) ISO/IEC 2003 All rights reserved iii Contents Foreword vi Introduction vii 1 Scope 1 2

8、 Conformance 1 3 Normative references 1 4 Terms and definitions 2 4.1 External definitions 2 4.2 Other definitions 3 4.2.1 Authentication Server PINX 3 5 Symbols and abbreviated terms 3 6 Signalling protocol for the support of SS-WTAT 3 6.1 SS-WTAT description 3 6.2 SS-WTAT operational requirements

9、3 6.2.1 Requirements on a Visitor PINX 3 6.2.2 Requirements on a Home PINX 3 6.2.3 Requirements on the Authentication Server PINX 3 6.2.4 Requirements on a Transit PINX 3 6.3 SS-WTAT coding requirements 4 6.3.1 Operations 4 6.3.2 Information elements 7 6.3.3 Messages 7 6.4 SS-WTAT state definitions

10、7 6.4.1 States at the Home PINX for initiation of SS-WTAT 7 6.4.2 States at the Home PINX for requesting authentication parameters 8 6.4.3 States at the Home PINX when fetching authentication parameters 8 6.4.4 States at the Visitor PINX for execution of SS-WTAT 8 6.4.5 States at the Visitor PINX fo

11、r requesting authentication parameters 8 6.4.6 States at the Authentication Server PINX 8 6.5 SS-WTAT Signalling procedures 8 6.5.1 Actions at the Home PINX for initiation of SS-WTAT 8 6.5.2 Actions at the Home PINX for requesting authentication parameters 9 6.5.3 Actions at the Home PINX when fetch

12、ing authentication parameters 9 6.5.4 Actions at the Visitor PINX for local initiation of SS-WTAT 10 6.5.5 Actions at the Visitor PINX for execution of SS-WTAT 10 6.5.6 Actions at the Visitor PINX for requesting authentication parameters 11 6.5.7 Actions at the Authentication Server PINX 11 6.5.8 Ac

13、tions at a Transit PINX 12 6.6 SS-WTAT Impact of interworking with public ISDNs 12 6.7 SS-WTAT Impact of interworking with non-ISDNs 12 6.8 Protocol interactions between SS-WTAT and other supplementary services and ANFs 12 6.8.1 Interaction with Calling Name Identification Presentation (SS-CNIP) 12

14、6.8.2 Interaction with Connected Name Identification Presentation (SS-CONP) 12ISO/IEC 15433:2003(E) iv ISO/IEC 2003 All rights reserved 6.8.3 Interaction with Completion of Calls to Busy Subscriber (SS-CCBS) 12 6.8.4 Interaction with Completion of Calls on No Reply (SS-CCNR) 12 6.8.5 Interaction wit

15、h Call Transfer (SS-CT) 12 6.8.6 Interaction with Call Forwarding Unconditional (SS-CFU) 12 6.8.7 Interaction with Call Forwarding Busy (SS-CFB) 12 6.8.8 Interaction with Call Forwarding No Reply (SS-CFNR) 12 6.8.9 Interaction with Call Deflection (SS-CD) 12 6.8.10 Interaction with Path Replacement

16、(ANF-PR) 12 6.8.11 Interaction with Call Offer (SS-CO) 13 6.8.12 Interaction with Call Intrusion (SS-CI) 13 6.8.13 Interaction with Do Not Disturb (SS-DND) 13 6.8.14 Interaction with Do Not Disturb Override (SS-DNDO) 13 6.8.15 Interaction with Advice Of Charge (SS-AOC) 13 6.8.16 Interaction with Rec

17、all (SS-RE) 13 6.8.17 Interaction with Call Interception (ANF-CINT) 13 6.8.18 Interaction with Transit Counter (ANF-TC) 13 6.8.19 Interaction with Route Restriction Class (ANF-RRC) 13 6.8.20 Interaction with Message Waiting Information (SS-MWI) 13 6.8.21 Interaction with Wireless Terminal Location R

18、egistration (SS-WTLR) 13 6.8.22 Interaction with Wireless Terminal information exchange (ANF-WTINFO) 13 6.8.23 Interaction with Wireless Terminal Incoming Call (ANF-WTMI) 13 6.8.24 Interaction with Wireless Terminal Outgoing Call (ANF-WTMO) 13 6.8.25 Interaction with Authentication of the PISN (SS-W

19、TAN) 13 6.9 SS-WTAT parameter values (timers) 13 6.9.1 Timer T1 13 6.9.2 Timer T2 14 6.9.3 Timer T3 14 7 Signalling protocol for the support of SS-WTAN 14 7.1 SS-WTAN description 14 7.2 SS-WTAN operational requirements 14 7.2.1 Requirements on the Visitor PINX 14 7.2.2 Requirements on the Home PINX

20、14 7.2.3 Requirements on the Authentication Server PINX 14 7.2.4 Requirements on a Transit PINX 14 7.3 SS-WTAN coding requirements 14 7.3.1 Operations 14 7.3.2 Information elements 14 7.3.3 Messages 14 7.4 SS-WTAN state definitions 15 7.4.1 States at the Visitor PINX 15 7.4.2 States at the Home PINX

21、 15 7.4.3 States at the Authentication Server PINX 15 7.5 SS-WTAN signalling procedures 15 7.5.1 Actions at the Visitor PINX 15 7.5.2 Actions at the Home PINX 16 7.5.3 Actions at the Authentication Server PINX 16 7.5.4 Actions at a Transit PINX for authentication of a PISN 17 7.6 SS-WTAN impact of i

22、nterworking with public ISDNs 17 7.7 SS-WTAN impact of interworking with non-ISDNs 17 7.8 Protocol interactions between SS-WTAN and other supplementary services and ANFs 17ISO/IEC 15433:2003(E) ISO/IEC 2003 All rights reserved v 7.8.1 Interaction with Calling Name Identification Presentation (SS-CNI

23、P) 17 7.8.2 Interaction with Connected Name Identification Presentation (SS-CONP) 17 7.8.3 Interaction with Completion of Calls to Busy Subscriber (SS-CCBS) 17 7.8.4 Interaction with Completion of Calls on No Reply (SS-CCNR) 17 7.8.5 Interaction with Call Transfer (SS-CT) 17 7.8.6 Interaction with C

24、all Forwarding Unconditional (SS-CFU) 18 7.8.7 Interaction with Call Forwarding Busy (SS-CFB) 18 7.8.8 Interaction with Call Forwarding No Reply (SS-CFNR) 18 7.8.9 Interaction with Call Deflection (SS-CD) 18 7.8.10 Interaction with Path Replacement (ANF-PR) 18 7.8.11 Interaction with Call Offer (SS-

25、CO) 18 7.8.12 Interaction with Call Intrusion (SS-CI) 18 7.8.13 Interaction with Do Not Disturb (SS-DND) 18 7.8.14 Interaction with Do Not Disturb Override (SS-DNDO) 18 7.8.15 Interaction with Advice Of Charge (SS-AOC) 18 7.8.16 Interaction with Recall (SS-RE) 18 7.8.17 Interaction with Call Interce

26、ption (ANF-CINT) 18 7.8.18 Interaction with Transit Counter (ANF-TC) 18 7.8.19 Interaction with Route Restriction Class (ANF-RRC) 18 7.8.20 Interaction with Message Waiting Information (SS-MWI) 18 7.8.21 Interaction with Wireless Terminal Location Registration (SS-WTLR) 18 7.8.22 Interaction with Wi

27、reless Terminal information exchange (ANF-WTINFO) 18 7.8.23 Interaction with Wireless Terminal Incoming Call (ANF-WTMI) 18 7.8.24 Interaction with Wireless Terminal Outgoing Call (ANF-WTMO) 18 7.8.25 Interaction with Authentication of the PISN (SS-WTAT) 18 7.9 SS-WTAN parameter values (timers) 19 7.

28、9.1 Timer T4 19 7.9.2 Timer T5 19 Annexes A - Protocol Implementation Conformance Statement (PICS) proforma 20 B - Imported ASN.1 definitions 29 C - Examples of message sequences 30 D - Specification and Description Language (SDL) representation of procedures 35 E - ASN.1 definitions according to IT

29、U-T Recs. X.208 / X.209 45ISO/IEC 15433:2003(E) vi ISO/IEC 2003 All rights reserved Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of

30、 ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizat

31、ions, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in the ISO/IEC Dir

32、ectives, Part 2. The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at least 75 % of t

33、he national bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. ISO/IEC 15433 was prepared by ECMA (as ECMA-306) and was a

34、dopted, under a special “fast-track procedure”, by Joint Technical Committee ISO/IEC JTC 1, Information technology, in parallel with its approval by national bodies of ISO and IEC. This second edition cancels and replaces the first edition (ISO/IEC 15433:1999), which has been technically revised. IS

35、O/IEC 15433:2003(E) ISO/IEC 2003 All rights reserved vii Introduction This International Standard is one of a series of Standards defining Wireless Terminal Mobility (WTM) services and signalling protocols applicable to Private Integrated Services Networks (PISNs). The series uses ISDN concepts as d

36、eveloped by ITU-T and conforms to the framework of International Standards for Open Systems Interconnection as defined by ISO/IEC. This International Standard specifies the signalling protocol for use at the Q reference point in support of the Wireless Terminal Authentication supplementary services.

37、 The protocol defined in this International Standard forms part of the PSS1 protocol (informally known as QSIG). This International Standard is based upon the practical experience of ECMA member companies and the results of their active and continuous participation in the work of ISO/IEC JTC 1, ITU-

38、T, ETSI and other international and national standardization bodies. It represents a pragmatic and widely based consensus. ISO/IEC 2003 All rights reserved 1 1S c o p e This International Standard specifies the signalling protocol for the support of the Wireless Terminal Authentication supplementary

39、 services (SS-WTAT and SS-WTAN) at the Q reference point between Private Integrated services Network eXchanges (PINXs) connected together within a Private Integrated Services Network (PISN). Authentication of a WTM user (SS-WTAT) is a supplementary service that enables a PISN, as a security measure,

40、 to validate the identity provided by the WTM user. Authentication of the PISN (SS-WTAN) is a supplementary service that enables a served WTM user, as a security measure, to validate the identity of the PISN. The mechanisms used in these services are based on the challenge and response method of aut

41、hentication. Authentication algorithms to be used by these supplementary services are outside the scope of this International Standard. The Q reference point is defined in ISO/IEC 11579-1. Service specifications are produced in three stages and according to the method specified in ITU-T Rec. I.130.

42、This International Standard contains the stage 3 specification for the Q reference point and satisfies the requirements identified by the stage 1 and stage 2 specifications in ISO/IEC 15432. The signalling protocol for SS-WTAT and SS-WTAN uses certain aspects of the generic procedures for the contro

43、l of supplementary services specified in ISO/IEC 11582. This International Standard also specifies additional signalling protocol requirements for the support of interactions at the Q reference point between SS-WTAT / SS-WTAN and other supplementary services and ANFs. This International Standard is

44、applicable to PINXs which can interconnect to form a PISN. 2 Conformance In order to conform to this International Standard, a PINX shall satisfy the requirements identified in the Protocol Implementation Conformance Statement (PICS) proforma in annex A. 3 Normative references ISO/IEC 11571:1998, In

45、formation technology - Telecommunications and information exchange between systems - Private Integrated Services Networks - Addressing ISO/IEC 11574:2000, Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network - Circuit-mode 64 kbit

46、/s bearer services - Service description, functional capabilities and information flows ISO/IEC 11579-1:1994, Information technology - Telecommunications and information exchange between systems - Private integrated services network - Part 1: Reference configuration for PISN Exchanges (PINX) ISO/IEC

47、 11582:2002, Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network - Generic functional protocol for the support of supplementary services - Inter-exchange signalling procedures and protocol INTERNATIONAL STANDARD ISO/IEC 15433:200

48、3(E)Information technology Telecommunications and information exchange between systems Private Integrated Services Network Inter-exchange signalling protocol Wireless Terminal Authentication supplementary services The following referenced documents are indispensable for the application of this docum

49、ent. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/IEC 15433:2003(E) 2 ISO/IEC 2003 All rights reserved ISO/IEC 15428:1999, Information technology - Telecommunications and information exchange between systems - Private Integrated Services Network - Specification, functional model and information flows - Wireless Terminal Location Registration supplementary service and Wireless Terminal Information E