ISO 6176-1994 Textile machinery - Warp sizing machines - Maximum usable width《纺织机械 浆纱机 最大有效宽度》.pdf

《ISO 6176-1994 Textile machinery - Warp sizing machines - Maximum usable width《纺织机械 浆纱机 最大有效宽度》.pdf》由会员分享，可在线阅读，更多相关《ISO 6176-1994 Textile machinery - Warp sizing machines - Maximum usable width《纺织机械 浆纱机 最大有效宽度》.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、INTERNATIONAL ISO STANDARD 6176 Second edition 19944 2-01 Textile machinery - Warp sizing machines - Maximum usable width Matkiel pour Iindustrie textile - Encolleuses - Largeurs maximales u tilisables Reference nurher ISO 6176:1994(E) Copyright International Organization for Standardization Provide

2、d by IHS under license with ISONot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ISO 6176:1994(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national Standards bodies (ISO member bodies). The work of preparing Inter

3、national Standards is normally carried out through ISO technical committees. Esch member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison wit

4、h ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an

5、 International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard ISO 6176 was prepared by Technical Committee ISOnC 72, Textile machinery and allied machinety and accessories, Sub- committee SC 2, Winding and preparatoty machinery for fabric manu

6、fac- ture. This second edition cancels and replaces the first edition (ISO 6176:1981), tables 1 and 2 of which have been technically revised. Annex A of this International Standard is for information only. 0 ISO 1994 All rights reserved. Unless otherwise specified, no part of this publication may be

7、 reproduced or utilized in any form or by any means, electronie or mechanical, including photocopying and microfilm, without Permission in writing from the publisher. International Organization for Standardization Case Postale 56 l CH-l 211 Geneve 20 l Switzerland Printed in Switzerland Copyright In

8、ternational Organization for Standardization Provided by IHS under license with ISONot for ResaleNo reproduction or networking permitted without license from IHS-,-,-INTERNATIONAL STANDARD 0 ISO ISO 6176:1994(E) Textile machinery - Warp sizing machines - Maximum usable width 1 Scope This Internation

9、al Standard specifies the various maximum usable widths for the entry and delivery sections of a warp sizing machine. 2 The sections (see figure 1) 2.1 Entry section The entry section comprises the creel (B), sizing ap- paratus (C), wet splitting zone (D) and dryer (E). 2.2 Delivery section The deli

10、vety section comprises the dry splitting zone (F) and beaming headstock (G). 4 _- T m I - - - 1 U - - - - - 1. Cl w - e-a- -.- -_ Entry section (2.1) 3 Dimensions There is no relation between the widths of entry warp (A) and those of delivered warp (H). Table 1 - Maximum width of entry warp A mm 1 8

11、00 2 200 2 400 2 800 Table 2 - Maximum width of delivered warp Hmm 2 400 2 800 3 400 4000 4 600 c _ - -1 - LL -_ - Right side - - Left side Delivery section CZ.2) A = width of entry warp H = width of delivered warp Figure ll - Warp sizing machine 1 Copyright International Organization for Standardiz

12、ation Provided by IHS under license with ISONot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ISO 6176:1994(E) Annex A (informative) Bibliography l ISO 142:1976, Textile machinery and access- 2 ISO 2544:1975, Textile machinery and access- ories - Weavng preparatory m

13、achines - Defi- ories - Warping machinery - Preparation of nition of left and right sides. Warp for weaving - Vocabulary. Copyright International Organization for Standardization Provided by IHS under license with ISONot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

14、This page intentionally left blank Copyright International Organization for Standardization Provided by IHS under license with ISONot for ResaleNo reproduction or networking permitted without license from IHS-,-,-This page intentionally left blank Copyright International Organization for Standardiza

15、tion Provided by IHS under license with ISONot for ResaleNo reproduction or networking permitted without license from IHS-,-,-This page intentionally left blank Copyright International Organization for Standardization Provided by IHS under license with ISONot for ResaleNo reproduction or networking

16、permitted without license from IHS-,-,-ISO 6176:1994(E) ocs 59.120.30 Descriptors: textile machinery, warping machinery, dimensions, width, maximum value. Price based on 2 pages Copyright International Organization for Standardization Provided by IHS under license with ISONot for ResaleNo reproduction or networking permitted without license from IHS-,-,-