ISO 3987 CORR 1-2011 Petroleum products - Determination of sulfated ash in lubricating oils and additives Technical Corrigendum 1《石油产品 润滑油和添加剂内的炽灼残渣的测定 技术勘误表1》.pdf

《ISO 3987 CORR 1-2011 Petroleum products - Determination of sulfated ash in lubricating oils and additives Technical Corrigendum 1《石油产品 润滑油和添加剂内的炽灼残渣的测定 技术勘误表1》.pdf》由会员分享，可在线阅读，更多相关《ISO 3987 CORR 1-2011 Petroleum products - Determination of sulfated ash in lubricating oils and additives Technical Corrigendum 1《石油产品 润滑油和添加剂内的炽灼残渣的测定 技术勘误表1》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、ICS 75.100 Ref. No. ISO 3987:2010/Cor.1:2011(E) ISO 2011 All rights reserved Published in Switzerland INTERNATIONAL STANDARD ISO 3987:2010 TECHNICAL CORRIGENDUM 1 Published 2011-02-01 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION ORGANISATION INTERNATIONALE DE NORMALISATIONPetroleum products Determ

2、ination of sulfated ash in lubricating oils and additives TECHNICAL CORRIGENDUM 1 Produits ptroliers Dtermination des cendres sulfates dans les huiles lubrifiantes et dans les additifs RECTIFICATIF TECHNIQUE 1 Technical Corrigendum 1 to ISO 3987:2010 was prepared by Technical Committee ISO/TC 28, Petroleum products and lubricants. Page 5, 11.2 Correct the reproducibility values by replacing them with the following: 0,85 0,189 RX = for 0,005 % (m/m) u A u 0,100 % (m/m) 0,75 0,142 RX = for 0,11 % (m/m) u A u 25,0 % (m/m)