ISO 24102-4 AMD 1-2017 Intelligent transport systems - Communications access for land mobiles (CALM) - ITS station management - Part 4 Station-internal manageme.pdf

《ISO 24102-4 AMD 1-2017 Intelligent transport systems - Communications access for land mobiles (CALM) - ITS station management - Part 4 Station-internal manageme.pdf》由会员分享，可在线阅读，更多相关《ISO 24102-4 AMD 1-2017 Intelligent transport systems - Communications access for land mobiles (CALM) - ITS station management - Part 4 Station-internal manageme.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、 ISO 2017 Intelligent transport systems Communications access for land mobiles (CALM) ITS station management Part 4: Station-internal management communications AMENDMENT 1 Systmes intelligents de transport Accs aux communicat ions des services mobiles terrestres (CALM) Gestion des stations ITS Parti

2、e 4: Communications de gestion interne la station AMENDEMENT 1 INTERNATIONAL STANDARD ISO 24102-4 First edition 2013-07-01 Reference number ISO 24102-4:2013/Amd.1:2017(E) AMENDMENT 1 2017-04 ISO 24102-4:2013/Amd.1:2017(E)ii ISO 2017 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO 2017, Publishe

3、d in Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission

4、 can be requested from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.org ISO 24102-4:2013/Amd.1:2017(E) Fore

5、word ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a techn

6、ical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

7、electrotechnical standardization. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document

8、was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all suc

9、h patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents). Any trade name used in this document is information given for the convenience of users and

10、does not constitute an endorsement. For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to T

11、rade (TBT) see the following URL: w w w . i s o .org/ iso/ foreword .html. Amendment 1 to ISO 24102-4:2013 was prepared by Technical Committee ISO/TC 204, Intelligent transport systems. A list of all parts in the ISO 24102 series can be found on the ISO website. ISO 2017 All rights reserved iii Inte

12、lligent transport systems Communications access for land mobiles (CALM) ITS station management Part 4: Station-internal management communications AMENDMENT 1 Page 4, Figure 3 Replace Figure 3 by the following. Figure 3 IIC PDU structure ISO 24102-4:2013/Amd.1:2017(E) ISO 2017 All rights reserved 1 I

13、SO 24102-4:2013/Amd.1:2017(E) Page 4, Table 1 Replace Table 1 by the following. PDU element IIC-Request IIC-Response SourceITS-SCU-ID ITS-SCU-ID of source ITS-SCU, which produces the request. See parameter “ITS-scuId” specified in ISO 24102-1. ITS-SCU-ID of ITS-SCU, which produces the response. Dest

14、inationITS-SCU-ID ITS-SCU-ID of destination ITS-SCU, which shall evaluate the request. Same as SourceITS-SCU-ID of related request if not requested otherwise in this document. PDU-Counter Even number generated from a cyclic counter at the ITS-SCU, which produces the request. PDU-Counter of related r

15、equest in- cremented by one. PDU-ID One octet INTEGER value 0. One octet INTEGER value 1. Data Data type identifier RqDataID followed by length of RqData in Integer multiples of an octet and RqData. Data type identifier RsDataID followed by length of RsData in Integer multiples of an octet and RsDat

16、a. ErrorStatus Not existent. Existent. 0: No error happened 0: Number indicating type of error. Seq Security type identifier SecRqID fol- lowed by the length of SecRequest in Integer multiples of an octet and SecRequest. Security type identifier SecRsID fol- lowed by the length of SecResponse in Int

17、eger multiples of an octet and SecResponse. Page 5, Table 2 Replace Table 2 by the following. SourceITS-SCU-ID Destination- ITS-SCU-ID Description 0 Reserved. Used to indicate “own/local ITS-SCU”. Must not be used in communications with other ITS-SCUs. n.a. 1 ITS-SCU-ID identifying ITS-SCUs with ITS

18、-S host role. n.a. 2 ITS-SCU-ID identifying ITS-SCUs with ITS-S router role. 3 3 ITS test system (using IICP for upper tester access). 4 - 7 ITS-SCU-ID identifying ITS-SCUs with an implementation specific role. 8 65534 ITS-SCU-ID identifying uniquely a specific ITS-SCU in an ITS station. n.a. 65535

19、ITS-SCU-ID identifying all ITS-SCUs.2 ISO 2017 All rights reserved ISO 24102-4:2013/Amd.1:2017(E) Page 10, Annex A Replace Annex A with the following: Annex A (normative) ASN.1 module A.1 Overview The following ASN.1 module is specified in this annex: CALMiitsscu ISO (1) standard (0) calm-management

20、 (24102) iitsscu (4) asnm-1 (1) A.2 Module CALMiitsscu This module specifies ASN.1 type definitions together with useful ASN.1 value definitions. Unaligned packed encoding rules (PER) as specified in ISO/IEC 8825-2 shall be applied for this ASN.1 module. In order to achieve octet alignment enabling

21、cheap implementations, “fill” bits were defined. All fill bits shall be set to the value 0b. CALMiitsscu iso (1) standard (0) calm-management (24102) iitsscu (4) asnm-1 (1) DEFINITIONS AUTOMATIC TAGS:=BEGIN IMPORTS CIaClass, CIclass, CIstatus, Directivity, Link-ID, LLserviceAddr, MACaddress, MedType

22、 FROM CALMllsap iso(1) standard(0) calm-ll-sap(21218) asnm-1 (1) ITS-scuId, Param24102No, Param24102 FROM CALMmanagement iso (1) standard (0) calm-management (24102) local (1) asnm-1 (1) SimFUTcmd, SimFUTreq, SimFLTcmd, SimNUTcmd, SimNLTcmd, SimIUTcmd, SimFLTreq, SimNUTreq, SimNLTreq, SimIUTreq, Err

23、Status, MF-Command-request, MF-Request-request, MN-Command- request, MN-Request-request, MI-Command-request, MI-Request-request, MA-Command-request, MA-Request-request, MS-Command-request, MS-Request-request, MI-Get-request, MI-Set- request, MF-Command-confirm, MF-Request-confirm, MN-Command-confirm

24、, MN-Request-confirm, MI-Command-confirm, MI-Request-confirm, MA-Command-confirm, MA-Request-confirm, MS-Command- confirm, MS-Request-confirm, MI-Get-confirm, MI-Set-confirm FROM CALMmsap iso (1) standard (0) calm-management (24102) msap (3) asnm-1 (1) - Details on SecRq and SecRs to be provided by

25、a standard on security ; - End of IMPORTS - Types - PDUs - - IIC-Request PDU IIC-Request:=SEQUENCE sourceITS-scuId ITS-scuId, destinationITS-scuId ITS-scuId, pduCounter PduCounter, requestID RequestID, - value zero pduRequest PduRequest, secRq SecRq RequestID:=INTEGER request (0) (0255) SECIICP:=CLA

26、SS &ref INTEGER(0255), - security type identifier ISO 2017 All rights reserved 3 ISO 24102-4:2013/Amd.1:2017(E)&SecIICP SecIICPs SECIICP:=noSecurity | octString, . noSecurity SECIICP:=&ref 0, &SecIICP NULL octString SECIICP:=&ref 1, &SecIICP OCTET STRING (SIZE(065535) SecRq:=SEQUENCE secRqRef SECIIC

27、P.&ref(SecIICPs), secRq SECIICP.&SecIICP(SecIICPssecRqRef) IICPREQ:=CLASS &ref INTEGER(0255), - data type identifier &IICPrequest IICPrequests IICPREQ:=aliveRq | mfRcmdRq | mfRreqRq | mnRcmdRq | mnRreqRq | miRcmdRq | miRreqRq | miRgetRq | miRsetRq | mCmdRq | maRcmdRq | maRreqRq | msRcmdRq | msRreqRq

28、 | simFutCmdRq | simFutReqRq | simNutCmdRq | simNutReqRq | simIutCmdRq | simIutReqRq | simFltCmdRq | simFltReqRq | simNltCmdRq | simNltReqRq, . PduRequest:=SEQUENCE reqRef IICPREQ.&ref(IICPrequests), - data type identifier iicpReq IICPREQ.&IICPrequest(IICPrequestsreqRef) aliveRq IICPREQ:=&ref 0, &II

29、CPrequest ITS-SCUalive mfRcmdRq IICPREQ:=&ref 1, &IICPrequest MF-Command-request mfRreqRq IICPREQ:=&ref 2, &IICPrequest MF-Request-request mnRcmdRq IICPREQ:=&ref 3, &IICPrequest MN-Command-request mnRreqRq IICPREQ:=&ref 4, &IICPrequest MN-Request-request miRcmdRq IICPREQ:=&ref 5, &IICPrequest MI-Com

30、mand-request miRreqRq IICPREQ:=&ref 6, &IICPrequest MI-Request-request miRgetRq IICPREQ:=&ref 7, &IICPrequest MI-Get-request miRsetRq IICPREQ:=&ref 8, &IICPrequest MI-Set-request mCmdRq IICPREQ:=&ref 9, &IICPrequest McmdRq maRcmdRq IICPREQ:=&ref 10, &IICPrequest MA-Command-request maRreqRq IICPREQ:=

31、&ref 11, &IICPrequest MA-Request-request msRcmdRq IICPREQ:=&ref 12, &IICPrequest MS-Command-request msRreqRq IICPREQ:=&ref 13, &IICPrequest MS-Request-request - simAutCmdRq IICPREQ:=&ref 242, &IICPrequest SimAUTcmd - simAutReqRq IICPREQ:=&ref 243, &IICPrequest SimAUTreq simFutCmdRq IICPREQ:=&ref 244

32、, &IICPrequest SimFUTcmd simFutReqRq IICPREQ:=&ref 245, &IICPrequest SimFUTreq simNutCmdRq IICPREQ:=&ref 246, &IICPrequest SimNUTcmd simNutReqRq IICPREQ:=&ref 247, &IICPrequest SimNUTreq simIutCmdRq IICPREQ:=&ref 248, &IICPrequest SimIUTcmd simIutReqRq IICPREQ:=&ref 249, &IICPrequest SimIUTreq - sim

33、AltCmdRq IICPREQ:=&ref 250, &IICPrequest SimALTcmd - simAltReqRq IICPREQ:=&ref 251, &IICPrequest SimALTreq simFltCmdRq IICPREQ:=&ref 252, &IICPrequest SimFLTcmd simFltReqRq IICPREQ:=&ref 253, &IICPrequest SimFLTreq simNltCmdRq IICPREQ:=&ref 254, &IICPrequest SimNLTcmd simNltReqRq IICPREQ:=&ref 255,

34、&IICPrequest SimNLTreq ITS-SCUalive:=SEQUENCE message AliveMessage, its-scuType ITS-SCUtype AliveMessage:= INTEGER alive (0), delete (1), new (255) (0255) ITS-SCUtype:= INTEGER unknown (0), 4 ISO 2017 All rights reserved ISO 24102-4:2013/Amd.1:2017(E)host (1), router (2), itsTestSystem (3), any (255

35、) (0255) - General OBJECT CLASS for management commands MCMD:=CLASS &refMcmd INTEGER(0255), - allows for 256 commands &Mcmd MCMDREQ:=MCMD McmdRq:=SEQUENCE mCmdRef MCMDREQ.&refMcmd(McmdReqs), mcmd MCMDREQ.&Mcmd (McmdReqsmCmdRef) McmdReqs MCMDREQ:=pingRq | vCIinfoRq | vCIupdateRq | getParam24102Rq | s

36、etParam24102Rq | testIicpRq | testConfigRq, . pingRq MCMDREQ:=&refMcmd 0, &Mcmd PingIICP vCIinfoRq MCMDREQ:=&refMcmd 1, &Mcmd VCI-info-req vCIupdateRq MCMDREQ:=&refMcmd 2, &Mcmd VCI-update-req getParam24102Rq MCMDREQ:=&refMcmd 3, &Mcmd Param24102No setParam24102Rq MCMDREQ:=&refMcmd 4, &Mcmd Param241

37、02 testIicpRq MCMDREQ:=&refMcmd 254, &Mcmd TestIicp testConfigRq MCMDREQ:=&refMcmd 255, &Mcmd TestConfigIICP PingIICP:=OCTET STRING (SIZE(0255) VCI-info-req:=SEQUENCE medType MedType, ciaClass CIaClass, ciClass CIclass VCI-update-req:=SEQUENCE (SIZE(0255) OF VCI-Info VCI-Info:=SEQUENCE linkId Link-I

38、D, medType MedType, ciaClass CIaClass, ciClass CIclass, status CIstatus TestIicp:=SEQUENCE fill BIT STRING (SIZE(6), - all bits set to 0 action CHOICE - simulation of a trigger event in the ITS-S management entity of the SUT - to perform remote COMMAND access to an MX-SAP in the ITS test system - re

39、quest to send MF-Command-request to ITS test system mfRcmd MFrcmd, - request to send MN-Command-request to ITS test system mnRcmd MNrcmd, - request to send MI-Command-request to ITS test system miRcmd MIrcmd - request to send MS-Command-request to ITS test system - msRcmd MSrcmd, - request to send M

40、A-Command-request to ITS test system maRcmd MArcmd - Upper Tester TX: remote COMMAND accesses to an MX-SAP - MSrcmd:=SEQUENCE ISO 2017 All rights reserved 5 ISO 24102-4:2013/Amd.1:2017(E) - destination ITS-scuId, - cmd MS-Command-request - MArcmd:=SEQUENCE destination ITS-scuId, cmd MA-Command-reque

41、st MFrcmd:=SEQUENCE destination ITS-scuId, cmd MF-Command-request MNrcmd:=SEQUENCE destination ITS-scuId, cmd MN-Command-request MIrcmd:=SEQUENCE destination ITS-scuId, cmd MF-Command-request TestConfigIICP:=SEQUENCE location BIT STRING (SIZE(6), lowerLayers BIT STRING (SIZE(1), testMode BIT STRING

42、(SIZE(1) - IIC-Response PDU IIC-Response:=SEQUENCE sourceITS-scuId ITS-scuId, destinationITS-scuId ITS-scuId, pduCounter PduCounter, responseID ResponseID, - value 1 pduResponse PduResponse, errorStatus PduErrStatus, secRs SecRs ResponseID:=INTEGER response (1) (0255) SecRs:=SEQUENCE secRsRef SECIIC

43、P.&ref(SecIICPs), secRs SECIICP.&SecIICP(SecIICPssecRsRef) IICPRES:=CLASS &ref INTEGER(0255), &IICPresponse IICPresponses IICPRES:=aliveRs | mfRcmdRs | mfRreqRs | mnRcmdRs | mnRreqRs | miRcmdRs | miRreqRs | miRgetRs | miRgetRs | miRsetRs | mCmdRs | maRcmdRs | maRreqRs | msRcmdRs | msRreqRs | simAutC

44、mdRs | simAutReqRs | simFutCmdRs | simFutReqRs | simNutCmdRs | simNutReqRs | simIutCmdRs | simIutReqRs | simAltCmdRs | simAltReqRs | simFltCmdRs | simFltReqRs | simNltCmdRs | simNltReqRs, . PduResponse:=SEQUENCE resRef IICPRES.&ref(IICPresponses), - data type identifier iicpRes IICPRES.&IICPresponse

45、(IICPresponsesresRef) aliveRs IICPRES:=&ref 0, &IICPresponse ITS-SCUalive mfRcmdRs IICPRES:=&ref 1, &IICPresponse MF-Command-confirm mfRreqRs IICPRES:=&ref 2, &IICPresponse MF-Request-confirm mnRcmdRs IICPRES:=&ref 3, &IICPresponse MN-Command-confirm mnRreqRs IICPRES:=&ref 4, &IICPresponse MN-Reques

46、t-confirm miRcmdRs IICPRES:=&ref 5, &IICPresponse MI-Command-confirm miRreqRs IICPRES:=&ref 6, &IICPresponse MI-Request-confirm 6 ISO 2017 All rights reserved ISO 24102-4:2013/Amd.1:2017(E) miRgetRs IICPRES:=&ref 7, &IICPresponse MI-Get-confirm miRsetRs IICPRES:=&ref 8, &IICPresponse MI-Set-confirm

47、mCmdRs IICPRES:=&ref 9, &IICPresponse McmdRs maRcmdRs IICPRES:=&ref 10, &IICPresponse MA-Command-confirm maRreqRs IICPRES:=&ref 11, &IICPresponse MA-Request-confirm msRcmdRs IICPRES:=&ref 12, &IICPresponse MS-Command-confirm msRreqRs IICPRES:=&ref 13, &IICPresponse MS-Request-confirm simAutCmdRs IIC

48、PRES:=&ref 242, &IICPresponse NULL simAutReqRs IICPRES:=&ref 243, &IICPresponse NULL simFutCmdRs IICPRES:=&ref 244, &IICPresponse NULL simFutReqRs IICPRES:=&ref 245, &IICPresponse NULL simNutCmdRs IICPRES:=&ref 246, &IICPresponse NULL simNutReqRs IICPRES:=&ref 247, &IICPresponse NULL simIutCmdRs IICPRES:=&ref 248, &IICPresponse NULL simIutReqRs IICPRES:=&ref 249, &IICPresponse NULL simAltCmdRs IICPRES:=&ref 250, &IICPresponse NULL simAltReq