ISO 24097-1-2017 Intelligent transport systems - Using web services (machine-machine delivery) for ITS service delivery - Part 1 Realization of interoperable we.pdf

《ISO 24097-1-2017 Intelligent transport systems - Using web services (machine-machine delivery) for ITS service delivery - Part 1 Realization of interoperable we.pdf》由会员分享，可在线阅读，更多相关《ISO 24097-1-2017 Intelligent transport systems - Using web services (machine-machine delivery) for ITS service delivery - Part 1 Realization of interoperable we.pdf（50页珍藏版）》请在麦多课文档分享上搜索。

1、 ISO 2017 Intelligent transport systems Using web services (machine-machine delivery) for ITS service delivery Part 1: Realization of interoperable web services Utilisation des services du Web (livraison de machine machine) pour la livraison de services ITS Partie 1: Ralisation des services du Web i

2、nteroprables INTERNATIONAL STANDARD ISO 24097-1 Second edition 2017-07 Reference number ISO 24097-1:2017(E) ISO 24097-1:2017(E)ii ISO 2017 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO 2017, Published in Switzerland All rights reserved. Unless otherwise specified, no part of this publication

3、may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of t

4、he requester. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.org ISO 24097-1:2017(E)Foreword v Introduction vi 1 Scope . 1 2 Normative references 2 3 T erms, definitions and abbr e viat ed t erm

5、s 2 3.1 Terms and definitions . 2 3.2 Abbreviated terms . 3 4 Conformance . 3 5 Notation . 4 5.1 Prefixes and namespace URI used in core specification . 4 5.2 Web service syntax notation: BNF pseudo-schemas 4 5.3 XPath 1.0 notation 5 5.4 Notation of service provider, service consumer combination . 5

6、 5.5 SOA stack name notation . 5 5.6 Set notation 5 5.7 Tentative IRI expression . 5 5.8 Rnnnn (nnnn: digits integer) 5 6 Requirements 6 6.1 Basic concept of web services standardization 6 6.1.1 Web services architecture 6 6.1.2 International standard web service standardization . 7 6.2 Web service

7、metadata . 8 6.2.1 Common requirements and recommendations for metadata 9 7 Service description layer 11 7.1 Service description layer structure 11 7.2 Service description layer: Requirement and recommendation for interface description sublayer 11 7.2.1 Role of WSDL 11 7.2.2 Multiple WSDL specificat

8、ions 11 7.2.3 WSDL and SOAP relationship .13 7.2.4 ITS web service interface metadata (WSDL) versioning rule 13 7.2.5 Requirement and recommendation for applying WSDL 2.0 .13 7.3 Service description layer: Requirement and recommendation for policy description sublayer 14 7.3.1 WS-Policy role and syn

9、tax 14 7.3.2 Requirement and recommendation for policy description17 7.4 Service description layer: Requirement and recommendation for addressing sublayer 18 8 Quality of service layer 18 8.1 Quality of service layer: Requirement and recommendation for reliable messaging sublayer 18 8.1.1 Requiremen

10、t and recommendation for reliable messaging policy description .18 8.2 Quality of service layer: Requirement and recommendation for security sublayer 20 8.3 Quality of service layer: Requirement and recommendation for transaction sublayer 20 9 Messaging layer.20 9.1 Messaging layer: Requirement and

11、recommendation for XML messaging 20 9.1.1 Role of SOAP20 9.1.2 SOAP Structure .21 9.1.3 SOAP 1.2 relationship to WSDL 1.2 .21 9.1.4 SOAP message transmission optimization (MTOM) policy21 10 Service publication/discovery layer .21 ISO 2017 All rights reserved iii Contents Page ISO 24097-1:2017(E)10.1

12、 Service publication/discovery layer: requirement and recommendation for universal description, discovery, and integration 21 10.1.1 Role of UDDI 21 10.1.2 UDDI components 22 10.1.3 Public UDDI .22 10.1.4 Requirement and recommendation for service registration stack 24 Annex A (normative) Principles

13、 and evolution of WSDL from version 1.1 to 2.0 .25 Annex B (informative) WSDL syntax 36 Bibliography .39 iv ISO 2017 All rights reserved ISO 24097-1:2017(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). T

14、he work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-go

15、vernmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. The procedures used to develop this document and those intended for its further maintenance are described

16、 in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives). Attention is drawn to

17、 the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the I

18、SO list of patent declarations received (see www .iso .org/ patents). Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressi

19、ons related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: w w w . i s o .org/ iso/ foreword .html. This document was prepared by ISO/TC 204, Intelligent transport

20、systems. This second edition cancels and replaces the first edition (ISO 24097-1:2009), which has been technically revised. A list of all the parts in the ISO 24097- series, can be found on the ISO website. ISO 2017 All rights reserved v ISO 24097-1:2017(E) Introduction ITS services have been evolvi

21、ng from single functional and limited area specific services, to a broad range of services in which many systems co-operate to provide effective and efficient service provision across a wide area. Today, ITS services are required to communicate not just with other parts of the same ITS service, but

22、between different ITS services, and even with non-ITS services or a users system directly, e.g. traffic management systems, route guidance systems, homeland security systems, environment protection systems, private freight management systems, etc. These systems (even those limited to ITS services) a

23、re usually deployed in a heterogeneous environment that may use different hardware, operating systems (OS), middleware, and/or development languages. This creates a challenge to realize system coordination across the organizations in a way that is flexible and quick, at a reasonable cost. Web servic

24、es (WS) are a recent methodology that overcomes these difficulties. Using web service technology for ITS services can significantly simplify and reduce the cost of internet based service provision, which may well affect the speed at which ITS services are deployed. The World Wide Web Consortium (W3C

25、) defines web services as follows: “A web service is a software system designed to support interoperable machine-to-machine interaction over a network. It has an interface described in a machine-processable format (specifically WSDL (Web Services Description Language). Other systems interact with th

26、e web service in a manner prescribed by its description using SOAP-messages, typically conveyed using HTTP with an XML serialization in conjunction with other web-related standards.” Web services require significant functionality, and as a result, an architecture is indispensable. Web service standa

27、rdization organizations construct standards by SOA. SOA is the evolutional form of distributed computing and object orientation. By applying SOA-based standards to the ITS services, the following benefits are expected. From a business viewpoint: Increased service value; Internationalization; and Exp

28、ansion towards business automation. From a system development viewpoint: Easy and quick development of ITS service coordination and service area expansion; More efficient service development (web services enable system developers to focus on the “what” rather than the “how.” “How” is covered by a se

29、t of standard base tools. This enables quick and easy system software development; More reusable software because web service standards have a composable structure, and Easier connections to legacy systems. In the ITS sector, a significant number of messages have been or are being developed (and in

30、some cases standardized). Message standardization is intended to improve system coordination, interoperability and re-use, so the conditions for web services are already considered mature. In addition, the use of web services will increase the flexibility of ITS services to interoperate and communic

31、ate beyond the ITS sector and in areas where the delineation between ITS services and general commercial services converge. From the perspective of web services standards evolution, 2007 was an epoch-making year. WSDL 2.0 became the W3C recommendation. Correspondingly, relevant web service specifica

32、tions were standardized by open standards bodies (W3C and OASIS). These standards cover all functional layers. By using these standards, the ITS sector has a rigid base for interoperable web services.vi ISO 2017 All rights reserved ISO 24097-1:2017(E) ITS service collaboration with other sectors is

33、expected to increase mutual effectiveness. Economic globalization also requires communication across the country, often across the world. All of these collaborations rely on interoperability of services. Interoperability is only achieved based on open international standards. Web services were devel

34、oped to use distributed network resources in an interoperable way. However, to realize interoperable web services various capabilities are required. Using web services (machine-machine delivery) for ITS service delivery has been developed considering these circumstances. ISO 24097 consists of two pa

35、rts: ISO 24097-1 and ISO/TR 24097-2. This document focuses on a way to realize interoperable ITS web services. ISO/TR 24097-2 will be an example-based document which will show how to realize interoperable web services. ISO 2017 All rights reserved vii Intelligent transport systems Using web services

36、 (machine-machine delivery) for ITS service delivery Part 1: Realization of interoperable web services 1 Scope This document establishes a Service Oriented Architecture (SOA) for the realization of interoperable web services for Intelligent Transport Systems (ITS). Web service behaviour is described

37、 at the metadata level, i.e. a higher level of abstraction, to enable auto-generation of both a service requester program as well as a service provider program. Figure 1 presents the principal entities involved in a web service scenario. They are service provider, service requester, and registry. Th

38、e registry includes business information and technical information such as interface and policy. Figure 1 also depicts the actions of the service provider and the service requester. A service provider interacts with the registry to enable it to “publish” the provided service. The service is characte

39、rized in the form of a web service interface describer in the form of a standardized web service description language (WSDL) and policy (WS-Policy). A service requester interacts with the registry to “discover” a provider for the service he is seeking. That interaction takes place through “Universal

40、 Description Discovery, and Integration” (UDDI) dialogue and endpoint reference (EPR). Once the service requester identifies a service provider, he “binds” to the service provider via an SOA protocol. This document is applicable to inter-ITS sector web services as well as ITS web services for non-IT

41、S users. Figure 1 Web service entities and their relationships INTERNATIONAL ST ANDARD ISO 24097-1:2017(E) ISO 2017 All rights reserved 1 ISO 24097-1:2017(E) 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes require

42、ments of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 14817 (all parts), Intelligent transport systems ITS central data dictionaries NOTE See Bibliography for general

43、 W3C references. 3 T erms, d efinitions and abbr e viat ed t erms For the purposes of this document, the following terms and definitions apply. ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at h t t p :/ www .electrop

44、edia .org/ ISO Online browsing platform: available at h t t p :/ www .iso .org/ obp General terms of W3C web service definitions can be obtained from the website w w w . w 3 .org/ tr/ ws -arch/ and terms defined in a specific web service standard are also referable. 3.1 T erms and definiti ons 3.1.1

45、 composability facility enabling web services to add new features incrementally 3.1.2 domain functional area in a policy assertion EXAMPLE Security, reliability, transaction, messaging optimization. 3.1.3 ITS WS web service that is designed specifically to support ITS services via the internet 3.1.4

46、 international standard web service web service conformant to this document 3.1.5 platform hardware, operating system, middleware, and application development language which provide a system environment 3.1.6 policy assertion element of service metadata which identifies a domain (such as messaging,

47、security, reliability and transaction) specific behaviour 3.1.7 skeleton elements of service-side code used for receiving remote method calls, invoking them and returning the result to the sender 3.1.8 stub client code required to talk to a remote service2 ISO 2017 All rights reserved ISO 24097-1:20

48、17(E) 3.1.9 WS metadata service metadata metadata high-level service description of a web service that controls provision of that service 3.2 Abbreviated terms BNF Backus-Naur Form BP basic profile (of Web Services Interoperability Organization) BPEL business process execution language DD data dicti

49、onary DR data registry EPR endpoint reference HTTP hypertext transfer protocol HTTPS hypertext transfer protocol security IRI internationalized resource identifier MIME multipurpose internet mail extension MOF meta object facility MTOM (SOAP) Message Transmission Optimization Mechanism OID Object Identifier OMG object management group OSI open system interconnection QoS quality of service REC recommendation RM reliable messaging RMI/IIOP remote method invocation/internet inter-ORB protocol RPC remote procedure