ISO 10303-227 CORR 1-2008 Industrial automation systems and integration - Product data representation and exchange - Part 227 Application protocol Plant spatial.pdf

《ISO 10303-227 CORR 1-2008 Industrial automation systems and integration - Product data representation and exchange - Part 227 Application protocol Plant spatial.pdf》由会员分享，可在线阅读，更多相关《ISO 10303-227 CORR 1-2008 Industrial automation systems and integration - Product data representation and exchange - Part 227 Application protocol Plant spatial.pdf（9页珍藏版）》请在麦多课文档分享上搜索。

1、ICS 25.040.40 Ref. No. ISO 10303-227:2005/Cor.1:2008(E) ISO 2008 All rights reserved Published in Switzerland INTERNATIONAL STANDARD ISO 10303-227:2005 TECHNICAL CORRIGENDUM 1 Published 2008-02-01 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION ORGANISATION INTERNATIONALE DE NORMALISATIONIndustrial a

2、utomation systems and integration Product data representation and exchange Part 227: Application protocol: Plant spatial configuration TECHNICAL CORRIGENDUM 1 Systmes dautomatisation industrielle et intgration Reprsentation et change de donnes de produits Partie 227: Protocole dapplication: Configur

3、ation spatiale dusine RECTIFICATIF TECHNIQUE 1 Technical Corrigendum 1 to ISO 10303-227:2005 was prepared by Technical Committee ISO/TC 184, Industrial automation systems and integration, Subcommittee SC 4, Industrial data. Introduction This Technical Corrigendum corrects ISO 10303-227:2005, Industr

4、ial automation systems and integration Product data representation and exchange Part 227: Application protocol: Plant spatial configuration. The purpose of the modifications to the text of ISO 10303-227:2005 is to correct errors in the text and the Mapping Specification and to replace the object ide

5、ntifier for the document and the applicable schemas. ISO 10303-227:2005/Cor.1:2008 (E) 2 ISO 2008 All rights reserved Modifications to the text of ISO 10303-227:2005 Page 561, 5.1.10.13.6 The purpose for this change is to correct a misspelled word. Replace “constraing” with “constraint” in the fourt

6、h line from the bottom of the page. Page 562, 5.1.10.13.6 The purpose for this change is to correct misspelled words in three lines of text. Replace “constraing” with “constraint” in the eighth, nineteenth, and thirtieth lines of text on the page. Page 807, 5.1.12.1.10 The purpose for this change is

7、 to correct the Reference path. Replace 5.1.12.1.10 with the following text. 5.1.12.1.10 connection_inspection_record to inspection_condition AIM element: PATH Reference path: material_property material_property_representation material_property_representation.dependent_environment - data_environment

8、 data_environment.description = inspection condition data_environment.elementsi - property_definition_representation property_definition_representation.definition - represented_definition represented_definition = property_definition property_definition property_definition.description = inspection co

9、ndition Page 807, 5.1.12.2 The purpose for this change is to correct the Reference path. Replace 5.1.12.2 with the following text. 5.1.12.2 Inspection_condition AIM element: property_definition Source: ISO 10303-45 Reference path: property_definition property_definition.description = inspection cond

10、ition Page 808, 5.1.12.2.2 The purpose for this change is to correct an aggregation in the Reference path. Replace the second line of the Reference path with the following text. data_environment.elementsi - ISO 10303-227:2005/Cor.1:2008 (E) ISO 2008 All rights reserved 3 Page 829, 5.1.13.13.6 The pu

11、rpose for this change is to correct the Reference path. Replace 5.1.13.13.6 with the following text. 5.1.13.13.6 heat_tracing_type AIM element: (descriptive_representation_item.description) (descriptive_representation_item.description document_usage_constraint.subject_element_value) Source: ISO 1030

12、3-45, ISO 10303-41 Reference path: plant_line_segment_definition representation = (heat_tracing_representation representation.itemsi - representation_item = descriptive_representation_item descriptive_representation_item.description) (heat_tracing_representation representation.itemsi - representatio

13、n_item = descriptive_representation_item descriptive_representation_item.description heat_tracing_representation document_item = heat_tracing_representation document_item document - document_usage_constraint.source document_usage_constraint document_usage_constraint.subject_element = heat tracing do

14、cument_usage_constraint.subject_element_value) ISO 10303-227:2005/Cor.1:2008 (E) 4 ISO 2008 All rights reserved Page 901, 5.1.16.18.3 The purpose for this change is to correct the Reference path. Replace 5.1.16.18.3 with the following text. 5.1.16.18.3 heat_tracing_type AIM element: (descriptive_rep

15、resentation_item.description) (descriptive_representation_item.description document_usage_constraint.subject_element_value) Source: ISO 10303-45, ISO 10303-41 Reference path: product representation = (heat_tracing_representation representation.itemsi - representation_item = descriptive_representatio

16、n_item descriptive_representation_item.description) (heat_tracing_representation representation.itemsi - representation_item = descriptive_representation_item descriptive_representation_item.description heat_tracing_representation document_item = heat_tracing_representation document_item document -

17、document_usage_constraint.source document_usage_constraint document_usage_constraint.subject_element = heat tracing document_usage_constraint.subject_element_value) ISO 10303-227:2005/Cor.1:2008 (E) ISO 2008 All rights reserved 5 Page 919, 5.1.16.32 The purpose for this change is to correct the Refe

18、rence path. Replace 5.1.16.32 with the following text. 5.1.16.32 Material_specification_selection AIM element: material_property document Source: ISO 10303-41, ISO 10303-45 Reference path: material_property material_property document document.kind - document_type document_type.product_data_type = ma

19、terial specification Page 924, 5.1.16.35.3 The purpose for this change is to correct misspelled words in three lines of text. Replace “constraing” with “constraint” in the twenty fourth, thirty sixth, and last lines of text on the page. Page 925, 5.1.16.35.3 The purpose for this change is to correct

20、 a misspelled word. Replace “constraing” with “constraint” in the second line of text from the bottom of the clause. Page 938, 5.1.16.42.3 The purpose for this change is to correct the Reference path. Replace 5.1.16.42.3 with the following text. 5.1.16.42.3 heat_tracing_type AIM element: (descriptiv

21、e_representation_item.description) (descriptive_representation_item.description document_usage_constraint.subject_element_value) Source: ISO 10303-45, ISO 10303-41 Reference path: piping_component_definition = product_definition characterized_product_definition = product_definition characterized_pro

22、duct_definition characterized_definition = characterized_product_definition characterized_definition - property_definition.definition property_definition represented_definition = property_definition represented_definition - property_definition_representation.definition ISO 10303-227:2005/Cor.1:2008

23、(E) 6 ISO 2008 All rights reserved property_definition_representation property_definition_representation.used_representation - representation = (heat_tracing_representation representation.itemsi - representation_item = descriptive_representation_item descriptive_representation_item.description) (hea

24、t_tracing_representation representation.itemsi - representation_item = descriptive_representation_item descriptive_representation_item.description heat_tracing_representation document_item = heat_tracing_representation document_item document material_property = required_material_property property_de

25、finition property_definition.description ISO 10303-227:2005/Cor.1:2008 (E) ISO 2008 All rights reserved 7 Page 970, 5.1.16.56.4 The purpose for this change is to correct the Reference path. Replace 5.1.16.56.4 with the following text. 5.1.16.56.4 required_material_description to material_specificati

26、on_selection AIM element: PATH Reference path: product_definition characterized_product_definition = product_definition characterized_product_definition characterized_definition = characterized_product_definition characterized_definition material_property Page 1007, 5.1.17.14.2 The purpose for this

27、change is to correct the Reference path. Replace 5.1.17.14.2 with the following text. 5.1.17.14.2 shape_representation to shape_representation_element_usage AIM element: PATH Rules: subtype_mandatory_shape_representation Reference path: shape_representation representation_item Page 1402, Annex C The

28、 purpose for this change is to add Part 28 as an allowable Implementation method in addition to Part 21. Replace the first paragraph with the following text. The implementation method defines what types of exchange behavior are required with respect to this part of ISO 10303. Conformance to this par

29、t of ISO 10303 shall be realized in an exchange structure. The file format shall be encoded according to the syntax and EXPRESS language mapping defined in either ISO 10303-21 or ISO 10303-28 and in the AIM defined in Annex A of this part of ISO 10303. The header exchange structure shall identify us

30、e of this part of ISO 10303 by the schema name plant_spatial_configuration. Page 1402, Annex C Edition 2 of ISO 10303-21 added the capability to identify the particular Application protocol Conformance Class to which an exchange file conforms. The purpose for this change is to add the specification

31、of values for this part of ISO 10303 to utilize that capability. Insert the following text after the existing paragraph. C.1 General requirements For various reasons, some entities may not be completely exported into an exchange structure. There may be mandatory information in the AIM that has no co

32、rrespondence in the ARM. Sometimes an application may not maintain all the information that is anticipated for the data exchange. Other times, ISO 10303-227:2005/Cor.1:2008 (E) 8 ISO 2008 All rights reserved the information may be maintained by a sending system but not included in the data exchange.

33、 Nevertheless, the preprocessor must provide values for all mandatory attributes in an exchange file. When no data is provided by a sending system for a required string value, the preprocessor shall use .UNUSED. or the empty string . To further indicate the reason why no data is provided, the follow

34、ing convention shall be used: An empty string indicates user data managed by the sending system but not provided for data exchange. As receiving system software may depend upon population of realistic data values for required attributes, use of empty strings is discouraged; A string with a value of

35、.UNUSED. indicates user data in a mandatory attribute that is not managed by the sending system, is not known at the time of the data exchange, or is mandatory AIM information that has no correspondence in the ARM; $ is used in the physical file if an optional attribute is not instantiated. C.2 Requ

36、irements specific to the implementation method defined in ISO 10303-21 If the implementation method is ISO 10303-21, the file format shall be encoded according to the syntax and EXPRESS language mapping defined in ISO 10303-21. The FILE_SCHEMA element of the header shall specify the name of the EXPR

37、ESS schema used and include its object information identifier (see Annex E). EXAMPLE The instance below identifies the ship_arrangement schema: FILE_SCHEMA ( PLANT_SPATIAL_CONFIGURATION 1 0 10303 227 3 1 1 ) C.3 Requirements specific to the implementation method defined in Edition 2 of ISO 10303-21

38、ISO 10303-21:2002 added the capability to specify the particular Conformance Class to which the Data section of an exchange file conforms. Exchange files conforming to the 2002 Edition of ISO 10303-21 shall contain one or more instances of the entity Section_context in the Header section of the file

39、. Example SECTION_CONTEXT ($,(CC1); If a single Data section is included in the exchange file, a single instance of the entity Section_context shall be included, and the value of the attribute section_context.section shall be $. The set of values of the attribute section_context.context_identifiers

40、shall contain a single value to identify the particular Application protocol Conformance Class to which the data conforms. The attribute value shall be one of: CC1; CC2; CC3; CC4; CC5; ISO 10303-227:2005/Cor.1:2008 (E) ISO 2008 All rights reserved 9 CC6; CC7; CC8; CC9; CC10; CC11. Page 1405, E.1 Rep

41、lace the object identifier with the following text. iso standard 10303 part(227) version(3) Page 1405, E.2 Replace the sublause in its entirety with the following text. E.2 Schema identification To provide for unambiguous identification of the plant_spatial_configuration expanded schema in an open i

42、nformation system, the object identifier iso standard 10303 part(227) version(3) object(1) plant-spatial- configuration(1) is assigned to the plant_spatial_configuration expanded schema (see annex A). The meaning of this value is defined in ISO/IEC 8824-1, and is described in ISO 10303-1. To provide

43、 for unambiguous identification of the plant_spatial_configuration short form schema in an open information system, the object identifier iso standard 10303 part(227) version(3) object(1) plant-spatial- configuration-schema(2) is assigned to the plant_spatial_configuration short form schema (see 5.2). The meaning of this value is defined in ISO/IEC 8824-1, and is described in ISO 10303-1.