IEC TR 62392-2006 Suitability of typical electrical insulating material (EIM) for polymer recycling《典型的电绝缘材料用于聚合物回收的适宜性》.pdf

《IEC TR 62392-2006 Suitability of typical electrical insulating material (EIM) for polymer recycling《典型的电绝缘材料用于聚合物回收的适宜性》.pdf》由会员分享，可在线阅读，更多相关《IEC TR 62392-2006 Suitability of typical electrical insulating material (EIM) for polymer recycling《典型的电绝缘材料用于聚合物回收的适宜性》.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、 TECHNICAL REPORT IEC TR 62392First edition 2006-11Suitability of typical electrical insulating material (EIM) for polymer recycling Reference number IEC/TR 62392:2006(E) Publication numbering As from 1 January 1997 all IEC publications are issued with a designation in the 60000 series. For example,

2、 IEC 34-1 is now referred to as IEC 60034-1. Consolidated editions The IEC is now publishing consolidated versions of its publications. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the base publication incorporating amendment 1 and the base publication

3、incorporating amendments 1 and 2. Further information on IEC publications The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. Information relating to this publication, including its validity, is available in

4、the IEC Catalogue of publications (see below) in addition to new editions, amendments and corrigenda. Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication, as well as the list of publications issued, is also av

5、ailable from the following: IEC Web Site (www.iec.ch) Catalogue of IEC publications The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to search by a variety of criteria including text searches, technical committees and date of publication. On-line information is also avail

6、able on recently issued publications, withdrawn and replaced publications, as well as corrigenda. IEC Just Published This summary of recently issued publications (www.iec.ch/online_news/ justpub) is also available by email. Please contact the Customer Service Centre (see below) for further informati

7、on. Customer Service Centre If you have any questions regarding this publication or need further assistance, please contact the Customer Service Centre: Email: custserviec.ch Tel: +41 22 919 02 11 Fax: +41 22 919 03 00 TECHNICAL REPORT IEC TR 62392First edition 2006-11Suitability of typical electric

8、al insulating material (EIM) for polymer recycling PRICE CODE IEC 2006 Copyright - all rights reserved No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publish

9、er. International Electrotechnical Commission, 3, rue de Varemb, PO Box 131, CH-1211 Geneva 20, Switzerland Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmailiec.ch Web: www.iec.ch R For price, see current catalogue Commission Electrotechnique Internationale International Electrote

10、chnical Commission 2 TR 62392 IEC:2006(E) CONTENTS FOREWORD.3 1 Scope.5 2 Normative references .5 3 Terms and definitions .6 4 Environmental aspects of polymeric materials at the End Of Life (EOL) stage 8 5 Processing and separation of recycled materials 10 5.1 General .10 5.2 Separation methods 10

11、5.3 Recycling of the polymeric materials in WEEE.11 6 Material factors 12 6.1 General .12 6.2 Mechanical properties Tensile strength and toughness.12 6.3 Thermal endurance .13 6.4 Flammability/ignitability .14 6.5 Arc resistance .14 6.6 Comparative Tracking Index14 6.7 Insulating performance (volume

12、 resistivity, dielectric strength) 14 6.8 Weatherability UV-resistance .15 7 Design factors 15 7.1 Ease of dismantlement 15 7.2 Part labelling .16 7.3 Paints/finishes.16 7.4 Metallized parts 4 .16 8 Ageing evaluation/life estimation of recycled electrical insulating materials (EIMs) General remarks1

13、7 Bibliography18 Figure 1 Overview of possible ways to recover polymers .8 Figure 2 Energy consumption and recycled fraction .9 Figure 3 Tensile strength of reprocessed material13 Figure 4 Izod impact strength of reprocessed material .13 Table 1 WEEE typical composition 11 TR 62392 IEC:2006(E) 3 INT

14、ERNATIONAL ELECTROTECHNICAL COMMISSION _ SUITABILITY OF TYPICAL ELECTRICAL INSULATING MATERIAL (EIM) FOR POLYMER RECYCLING FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National

15、 Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly

16、Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- government

17、al organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on tec

18、hnical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by

19、IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international unif

20、ormity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5)

21、 IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its director

22、s, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising ou

23、t of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn

24、to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. The main task of IEC technical committees is to prepare International Standards. However, a technical committee m

25、ay propose the publication of a technical report when it has collected data of a different kind from that which is normally published as an International Standard, for example “state of the art“. IEC 62392, which is a technical report, has been prepared by IEC technical committee 112: Evaluation and

26、 qualification of electrical insulating materials and systems. 1The text of this technical report is based on the following documents: Enquiry draft Report on voting 15/235/DTR 15/263/RVC _ 1Technical committee 112 was created by combining the activities of sub-committee 15E and techical committee 9

27、8. This project was initially developed in technical committee 15 and then transferred to technical committee 112. 4 TR 62392 IEC:2006(E) Full information on the voting for the approval of this technical report can be found in the report on voting indicated in the above table. This publication has b

28、een drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this

29、date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. TR 62392 IEC:2006(E) 5 SUITABILITY OF TYPICAL ELECTRICAL INSULATING MATERIAL (EIM) FOR POLYMER RECYCLING 1 Scope This Technical Repo

30、rt gives information for the assessment of factors associated with the polymer recycling and/or reuse of typical insulating materials in electrotechnical equipment. It gives information and assistance to developers and design engineers for assessment in selecting polymers and polymer combinations, a

31、nd is a contribution to the preservation of resources and the minimization of disposal costs at the end of a product life. The environmental compatibility of polymers must be assessed in the light of the function of the materials in the product and the total service life. An important aspect is the

32、recovery of the material at the end of the product life. The value level of material recycling as recovery option can be improved by incorporation of suitability for dismantling into the design of the article and the choice of insulating materials which are generally used. This document will cover m

33、aterial recycling only as part of recovery. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any ame

34、ndments) applies. IEC 60093, Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials IEC 60112, Method for the determination of the proof and the comparative tracking indices of solid insulating materials IEC 60216-1, Electrical insulating materials Pr

35、operties of thermal endurance Part 1: Ageing procedures and evaluation of test results IEC 60216-2, Electrical insulating materials Thermal endurance properties Part 2: Determination of thermal endurance properties of electrical insulating materials Choice of test criteria IEC 60216-3, Electrical in

36、sulating materials Thermal endurance properties Part 3: Instructions for calculating thermal endurance characteristics IEC 60216-4-1, Electrical insulating materials Thermal endurance properties Part 4-1: Ageing ovens Single-chamber ovens IEC 60216-4-2, Electrical insulating materials Thermal endura

37、nce properties Part 4-2: Ageing ovens Precision ovens for use up to 300 C IEC 60216-4-3, Electrical insulating materials Thermal endurance properties Part 4-3: Ageing ovens Multi-chamber ovens IEC 60216-5, Electrical insulating materials Thermal endurance properties Part 5: Determination of relative

38、 thermal endurance index (RTE) of an insulating material 6 TR 62392 IEC:2006(E) IEC 60216-6, Electrical insulating materials Thermal endurance properties Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method IEC 60505, Evaluation

39、and qualification of electrical insulation systems IEC 61244-3, Long-term radiation ageing in polymers Part 3: Procedures for in-service monitoring of low-voltage cable materials ISO 179 (all parts), Plastics Determination of Charpy impact properties ISO 527 (all parts), Plastics Determination of te

40、nsile properties ISO 11469, Plastics Generic identification and marking of plastics products ISO 1043-1, Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics ISO 1043-2, Plastics Symbols and abbreviated terms Part 2: Fillers and reinforcing materials ISO 10

41、43-3, Plastics Symbols and abbreviated terms Part 3: Plasticizers ISO 1043-4, Plastics Symbols and abbreviated terms Part 4: Flame retardants 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 electrical insulating material EIM material with neg

42、ligibly low electric conductivity, used to separate conducting parts at different electrical potentials IEV 212-01-01:1990, MOD 3.2 composite 1) solid product consisting of two or more distinct phases, including a binding material (matrix) and a particulate or fibrous material NOTE Example: Moulding

43、 material containing reinforcing fibres, particulate fillers or hollow spheres. 2) solid product consisting of two or more layers (often in a symmetrical assembly) of plastic film or sheet, normal or syntactic cellular plastic, metal, wood, composite according to definition 1), etc. with or without

44、adhesive interlayers NOTE Examples: Film composites for packaging, sandwich cellular composite for structural applications, laminates made with paper, fabric, etc. ISO 472: 1999 TR 62392 IEC:2006(E) 7 3.3 (mechanical) recycling reprocessing in a production process of the waste materials for the orig

45、inal purpose or for other purposes but excluding energy recovery IEC Guide 109:2003 NOTE This definition excludes the chemical recycling during which the molecular structure is broken down to produce monomers. 3.4 feedstock recycling processing of plastic waste material, with significant change to t

46、he chemical structure of the material including cracking, gasification and de-polymerisation but excluding energy recovery or incineration 3.5 recyclability property of a substance or a material and parts/products made thereof that makes it possible for them to be recycled NOTE Recyclability of a pr

47、oduct is not only determined by the recyclability of the materials it contains. Product structure and logistics are also very important factors. IEC Guide 109, 2003 3.6 recycled polymer materials resulting from recycling 3.7 commingled A mixture of materials or products consisting of different types

48、 of plastics 3.8 contamination unwanted substance in polymeric materials according to the intended use 3.9 halogen containing material containing the elements F, Cl or Br either in the polymer (as in PVC, PTFE, ) or in the fire-retardant additive package 3.10 thermoplastic plastic capable of being r

49、epeatedly softened by heating and hardened by cooling through a temperature range characteristic of the plastic and, in the softened state, capable of being repeatedly shaped by flow into articles by moulding, extrusion or forming NOTE 1 Thermoplastics can be reprocessed and recycled by remelting. NOTE 2 Examples are given below as abbreviations after ISO 1043-1: PE, PVC,