IEC TR 62221-2012 Optical fibres - Measurement methods - Microbending sensitivity《光纤.测量方法.微弯敏感性》.pdf

《IEC TR 62221-2012 Optical fibres - Measurement methods - Microbending sensitivity《光纤.测量方法.微弯敏感性》.pdf》由会员分享，可在线阅读，更多相关《IEC TR 62221-2012 Optical fibres - Measurement methods - Microbending sensitivity《光纤.测量方法.微弯敏感性》.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC/TR 62221 Edition 2.0 2012-12 TECHNICAL REPORT Optical fibres Measurement methods Microbending sensitivity IEC/TR 62221:2012(E) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2012 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publicati

2、on may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enqu

3、iry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About

4、the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review b

5、y the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical comm

6、ittee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia -

7、www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Ser

8、vice Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC/TR 62221 Edition 2.0 2012-12 TECHNICAL REPORT Optical fibres Measurement methods Microbending sensitivity INTERNATIONAL EL

9、ECTROTECHNICAL COMMISSION T ICS 33.180.10 PRICE CODE ISBN 978-2-83220-500-6 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. colour inside 2 TR 62221 IEC:2012(E) CONTENTS FOREWORD . 4 1 Scope .

10、 6 2 Normative references . 6 3 General properties of microbending loss . 7 4 General considerations . 7 Launch condition for multimode fibres . 7 4.1Sample lengths . 7 4.2Winding tension . 7 4.3Relaxation time . 8 4.4Material used for fixed roughness 8 4.5Drum materials 8 4.6Drum material for tempe

11、rature cycling . 8 4.7 5 Test procedures . 8 Method A: expandable drum 8 5.1General . 8 5.1.1Apparatus 8 5.1.2Procedure 9 5.1.3Calculations . 9 5.1.4Method B: fixed diameter drum 10 5.2General . 10 5.2.1Apparatus 10 5.2.2Procedure 12 5.2.3Calculations . 12 5.2.4Method C: plate test 13 5.3General . 1

12、3 5.3.1Apparatus 13 5.3.2Procedure 14 5.3.3Calculations . 14 5.3.4Method D: basketweave 15 5.4General . 15 5.4.1Apparatus 15 5.4.2Procedure 16 5.4.3Calculations or interpretation of results 17 5.4.4 6 Results . 17 Annex A (informative) Representative results with method B 19 Bibliography 24 Figure 1

13、 Set-up for expandable drum method used in an optical fibre testing facility . 9 Figure 2 Standard winding/prooftester can be used for preparing the sample . 11 Figure 3 Example of a possible set-up in temperature cycling . 11 Figure 4 Alternative wire mesh set-up used in an optical fibre testing fa

14、cility 12 Figure 5 Microbend-inducing equipment . 13 Figure 6 Quartz drum with basketwoven fibre . 15 TR 62221 IEC:2012(E) 3 Figure 7 Basketweave example as used in an optical fibre testing facility 16 Figure 8 Example of temperature cycle inside chamber 17 Figure A.1 Example of temperature cycling

15、of 10 different unshifted single-mode fibres (wavelength 1 310 nm) 20 Figure A.2 Example of temperature cycling of 10 different unshifted single-mode fibres (wavelength 1 550 nm) 20 Figure A.3 Microbending repeatability for fibre N 1 with winding tension 1 N . 21 Figure A.4 Ribbon set-up . 21 Figure

16、 A.5 Losses at 1 310 nm for different ribbons . 22 Figure A.6 Losses at 1 625 nm for different ribbons . 22 Table A.1 Used instrument and values for single-mode fibres 19 Table A.2 Multimode fibre test results 23 4 TR 62221 IEC:2012(E) INTERNATIONAL ELECTROTECHNICAL COMMISSION _ OPTICAL FIBRES MEASU

17、REMENT METHODS MICROBENDING SENSITIVITY FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all que

18、stions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publicatio

19、n(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC co

20、llaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinio

21、n on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ens

22、ure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently t

23、o the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certificati

24、on bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall att

25、ach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fee

26、s) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publicati

27、on. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. The main task of IEC technical committees is to prepare International Standards. Howeve

28、r, a technical committee may propose the publication of a technical report when it has collected data of a different kind from that which is normally published as an International Standard, for example “state of the art“. IEC 62221, which is a technical report, has been prepared by subcommittee 86A:

29、 Fibres and cables, of IEC technical committee 86: Fibre optics. This second edition cancels and replaces the first edition published in 2001, and constitutes a technical and editorial revision. The main changes with respect to the previous edition are listed below: a) updates related to B6 (bend-in

30、sensitive) category single-mode fibres; b) inclusion of a definition for microbending and general properties; c) expansion of general considerations; TR 62221 IEC:2012(E) 5 d) more details given for each method; e) addition of an Annex A. The text of this technical report is based on the following d

31、ocuments: Enquiry draft Report on voting 86A/1460/DTR 86A/1470/RVC Full information on the voting for the approval of this technical report can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The comm

32、ittee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edit

33、ion, or amended. A bilingual version of this publication may be issued at a later date. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore pr

34、int this document using a colour printer. 6 TR 62221 IEC:2012(E) OPTICAL FIBRES MEASUREMENT METHODS MICROBENDING SENSITIVITY 1 Scope IEC 62221, which is a technical report, describes four methods (A, B, C and D) for the measurement of microbending sensitivity of optical fibres. These four methods ar

35、e distinguished by the equipment being used for measurements and their applications: method A using an expandable drum and applies to category A1 and class B fibres; method B using a fixed diameter drum and applies to category A1 and class B fibres; method C using a plate and applied loads and appli

36、es to category A1 and class B fibres; method D using a “basketweave“ wrap on a fixed diameter drum, and applies to category A1 and class B fibres Methods A and B may also be used to measure the microbending sensitivity of optical fibre ribbons. Methods A and C offer the capability to measure the mic

37、robending sensitivity over a wide range of applied linear pressure or loads. Method B may be used to determine the microbending sensitivity for a fixed linear pressure. Methods A, B and D can also be used at different temperatures (temperature cycling) provided special low thermal expansion material

38、s (e.g. quartz drums) are used. The results from the four methods can only be compared qualitatively. These methods are considered characterization type tests. It shall be understood that the microbend results from any method, could have significant variation between laboratories. These methods do n

39、ot constitute a routine test used in the general evaluation of optical fibre. This parameter is not generally specified within a detail specification. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its applic

40、ation. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60793-1-1:2008, Optical fibres Part 1-1: Measurement methods and test procedures General and guidance IEC 60793-1-22:2001, Optica

41、l fibres Part 1-22: Measurement methods and test procedures Length measurement IEC 60793-1-40:2001, Optical fibres Part 1-40: Measurement methods and test procedures Attenuation TR 62221 IEC:2012(E) 7 IEC 60793-1-46:2001, Optical fibres Part 1-46: Measurement and test procedures Monitoring of change

42、s in optical transmittance IEC 62614, Fibre optics Launch condition requirements for measuring multimode attenuation 3 General properties of microbending loss Added loss due to microbending occurs when localized lateral forces along the length of the fibre appear. These may be caused by manufacturin

43、g and installation strains, as well as dimensional variations in the cable materials due to temperature changes. Sensitivity to microbending is a function of the difference of refractive index of the core and the cladding, and diameters of the core and cladding. Coating structure and material proper

44、ty may also have an influence. The effect of microbending in single-mode fibres is increased optical loss at 1 310 nm, 1 550 nm and 1 625 nm wavelength ranges as opposed to macrobend effects in single-mode fibres that primarily is present in the longer wavelengths 1 550 nm and 1 625 nm. In category

45、A1 multimode fibres, microbending manifests itself in general nearly equally over a wide wavelength range (e.g. 850 nm 1 320 nm). To reduce microbending losses, the cable structure has to protect the optical fibres from lateral forces. Loose tube cable construction should be optimized to prevent buc

46、kling of the fibre in the tube during temperature changes leading to possible macrobending as well as microbending loss. Cable components such as the cable sheath and the strength member are important because they also help to reduce the microbending caused by the external mechanical forces on the c

47、able and by temperature changes. Microbending losses may also be introduced in aerial cables subjected to excessive elongation (e.g. heavy ice loading). 4 General considerations Launch condition for multimode fibres 4.1 Concerning multimode fibres, reference is made to the launching technique descri

48、bed in IEC 62614, as done for the macrobend test method. Sample lengths 4.2 This technical report lists several methods to evaluate microbend sensitivity for optical fibres. One key difference is the sample length requirements for the different methods. Though the exact sample lengths may vary, a li

49、st with lengths that have been typically used is given here below: Method Length A 300 m B 400 m C 2 m 3 m D 2,5 km Winding tension 4.3 When using methods A, B or D, the control of the winding tension should be mentioned and carried out with a calibrated device. Added loss due to microbending is reasonably linear over 8 TR 62221 IEC:2012(E) a winding tension range from 1 N to 3 N, but different winding tensions could yield different normal