IEC 62640-2011 Residual current devices with or without overcurrent protection for socket-outlets for household and similar use《家用及类似用途的插座用带有或不带过电流保护的漏电保护器》.pdf

《IEC 62640-2011 Residual current devices with or without overcurrent protection for socket-outlets for household and similar use《家用及类似用途的插座用带有或不带过电流保护的漏电保护器》.pdf》由会员分享，可在线阅读，更多相关《IEC 62640-2011 Residual current devices with or without overcurrent protection for socket-outlets for household and similar use《家用及类似用途的插座用带有或不带过电流保护的漏电保护器》.pdf（272页珍藏版）》请在麦多课文档分享上搜索。

1、 IEC 62640 Edition 1.0 2011-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses Dispositifs courant diffrentiel rsiduel avec ou sans protection contre les surintensits pour les socles de pris

2、es de courant destins des installations domestiques et analogues IEC62640:2011 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2011 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, elect

3、ronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please c

4、ontact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y c

5、ompris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Co

6、mit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Stand

7、ards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publica

8、tions: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all n

9、ew IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and Fr

10、ench, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre

11、 FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux techn

12、ologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f

13、.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez info

14、rm sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20

15、000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur

16、cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 62640 Edition 1.0 2011-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Residual current devices with or without overcurrent protection

17、 for socket-outlets for household and similar uses Dispositifs courant diffrentiel rsiduel avec ou sans protection contre les surintensits pour les socles de prises de courant destins des installations domestiques et analogues INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INT

18、ERNATIONALE XF ICS 29.120.50 PRICE CODE CODE PRIX ISBN 978-2-88912-325-4 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale 2 62640 IEC:2011 CONTENTS FOREWORD . 9 INTRODUCTION . 11 1 Scope . 12 2 Normative references .

19、13 3 Terms and definitions . 14 3.1 Definitions relating to currents flowing from live parts to earth . 14 3.2 Definitions relating to the energization of a residual current device . 15 3.3 Definitions relating to the operation and functions of the residual current device . 15 3.4 Definitions relati

20、ng to values and ranges of energizing quantities 17 3.5 Definitions relating to values and ranges of influencing quantities . 19 3.6 Definitions relating to conditions of operation 20 3.7 Definitions relating to tests 21 3.8 Definitions relating to residual current devices in general 21 4 Classifica

21、tion 21 4.1 Classification according to behaviour resulting from failure of the line voltage . 22 4.1.1 SRCD not opening automatically in case of failure of the line voltage 22 4.1.2 SRCD opening automatically in case of failure of the line voltage 22 4.2 Classification according to the design 22 4.

22、2.1 SRCD consisting of an RCD incorporated in (a) fixed socket-outlet(s) . 22 4.2.2 SRCD consisting of an RCD intended to be associated with fixed socket-outlets within the same mounting box or within two adjacent compatible boxes. 22 4.2.3 SRCD consisting of an RCD incorporated in a connection unit

23、 intended to protect only one piece of fixed electrical equipment (e.g. hand dryer, water cooler, etc.) immediately adjacent to the SRCD . 22 4.3 Classification according to behaviour in presence of d.c. components . 22 4.4 Classification according to the provision for earthing . 22 4.5 Classificati

24、on according to the design of the cover plate 22 4.6 Classification according to the method of mounting . 22 4.7 Classification according to the environmental conditions . 23 4.7.1 Classification according to the degree of protection against ingress of solid foreign objects 23 4.7.2 Classification a

25、ccording to the degree of protection against harmful ingress of water . 23 4.7.3 Classification according to the range of ambient air temperature . 23 4.8 Classification according to the type of terminals 23 4.9 Classification according to overcurrent protection 23 5 Characteristics of SRCDs . 23 5.

26、1 Summary of characteristics . 23 5.2 Characteristics common to all socket-outlet residual current devices . 24 5.2.1 Rated current (In) 24 5.2.2 Rated residual operating current (In) 24 5.2.3 Rated residual non-operating current (Ino) . 24 5.2.4 Rated voltage (Un) . 24 5.2.5 Rated frequency 24 5.2.

27、6 Rated residual making and breaking capacity (Im) 24 62640 IEC:2011 3 5.2.7 Operating characteristics in case of residual current 24 5.3 Characteristics specific to SRCDs with overcurrent protection (see 4.9) 25 5.3.1 SRCDs classified according to 4.9 a), 4.9 b) and 4.9 c) 1) . 25 5.3.2 Rated short

28、-circuit capacity (Icn) for SRCD classified according to 4.9 c) 2) 26 5.4 Preferred or standard values . 26 5.4.1 Preferred values of rated voltage (Un) . 26 5.4.2 Standard values of rated current (In) 26 5.4.3 Standard values of rated residual operating current (In) . 26 5.4.4 Standard value of rat

29、ed residual non-operating current (Ino) 26 5.4.5 Standard values of rated frequency . 26 5.4.6 Standard values of the rated making and breaking capacity (Im) 26 5.4.7 Standard values of the rated residual making and breaking capacity (Im) 27 5.4.8 Standard values of the rated conditional short-circu

30、it current (Inc) . 27 5.4.9 Standard values of the rated conditional residual short-circuit current (Ic) . 27 5.4.10 Standard values of the rated short-circuit capacity (Icn) . 27 5.4.11 Standard values of break time . 27 5.5 Standard ranges of overcurrent instantaneous tripping for SRCDs to 4.9 c)

31、2). 28 6 Marking and other product information 28 6.1 General . 28 6.2 Additional marking for screwless terminals 30 6.3 Additional marking for SRCDs with an FE connection 30 7 Standard conditions for operation in service and for installation 30 8 Requirements for construction and operation 31 8.1 G

32、eneral . 31 8.2 Information and marking 31 8.3 Mechanical and electrical design . 31 8.3.1 Mechanism 31 8.3.2 Clearance and creepage distances 32 8.3.3 Standing current in the FE . 34 8.3.4 Screws, current-carrying parts and connections . 34 8.3.5 Terminals 35 8.4 Operating characteristics . 35 8.4.

33、1 Operation in response to the type of residual current . 35 8.4.2 Operation in response to the presence of a residual current equal to or greater than In. 36 8.5 Behaviour of SRCDs with feed through terminals in case of miswiring . 36 8.6 Test device 36 8.7 Temperature rise . 36 8.8 Resistance to h

34、umidity 37 8.9 Dielectric properties 37 8.10 EMC compliance and unwanted tripping 37 8.10.1 EMC 37 8.10.2 Resistance against unwanted tripping due to current surges caused by impulse voltages for SRCDs of In 0,010 A 37 8.11 Behaviour of SRCDs in case of overcurrent conditions 37 8.11.1 For all SRCDs

35、 . 37 4 62640 IEC:2011 8.11.2 Behaviour of SRCDs classified according to 4.9 c) in case of overcurrent conditions . 38 8.11.3 Standard time-(over)current zone for SRCD according to 4.9 c) 1) and 4.9 c) 2) 38 8.12 Resistance of the insulation against impulse voltages . 39 8.13 Mechanical and electric

36、al endurance . 39 8.14 Resistance to mechanical shock 39 8.15 Reliability 39 8.16 Protection against electric shock and degree of protection IP of the SRCD 39 8.16.1 Inaccessibility of live parts . 40 8.16.2 Accessible knobs, operating means etc. 40 8.16.3 Accessible parts of SRCDs . 40 8.16.4 Degre

37、e of protection IP of the SRCD 41 8.17 Resistance to heat 41 8.18 Resistance to abnormal heat and to fire 41 8.19 Behaviour of SRCDs within ambient temperature range . 41 8.20 Resistance to temporary overvoltages . 41 9 Tests 42 9.1 General . 42 9.1.1 Test conditions 42 9.1.2 Characteristics of SRCD

38、s 42 9.2 Marking and test of indelibility of marking 43 9.3 Verification of the trip-free mechanism 43 9.3.1 General test conditions 43 9.3.2 Test procedure 44 9.4 Test for the verification of electronic circuits 44 9.5 Requirements for capacitors and specific resistors and inductors 45 9.5.1 Capaci

39、tors . 45 9.5.2 Resistors and inductors . 45 9.6 Test of reliability of screws, current-carrying parts and connections 47 9.7 Screwed and screwless terminals 47 9.7.1 Screwed terminals for external copper conductors . 47 9.7.2 Screwless terminals for external copper conductors 53 9.8 Verification of

40、 the operating characteristics of type AC and type A SRCDs 59 9.8.1 Test circuit 59 9.8.2 Verification of behaviour in the case of supply voltage failure 60 9.8.3 Off-load tests with residual sinusoidal alternating currents at the reference temperature of (20 5) C . 60 9.8.4 Verification of the corr

41、ect operation with load at the reference temperature . 61 9.8.5 Verification of the correct operation at the temperature limits with and without load . 61 9.8.6 Additional tests for SRCDs fitted with an FE 62 9.8.7 Verification of correct operation of type A SRCDs with residual currents having a d.c

42、. component 63 9.9 Verification of behaviour of SRCDs classified according to 4.2.1 b) in the case of miswiring . 64 9.10 Verification of the test device 64 9.10.1 Verification of the simulated residual current . 64 9.10.2 Verification of the operation of the test device . 64 62640 IEC:2011 5 9.11 V

43、erification of the limit of temperature rise 65 9.11.1 Test conditions 65 9.11.2 Ambient air temperature 65 9.11.3 Test procedure 66 9.11.4 Measurement of the temperature rise of different parts 66 9.12 Resistance to humidity 66 9.12.1 Preparation of the SRCD for test . 66 9.12.2 Test conditions 66

44、9.12.3 Test procedure 66 9.12.4 Condition of the SRCD after the test 67 9.13 Test of dielectric properties . 67 9.13.1 Insulation resistance of the main circuit . 67 9.13.2 Dielectric strength of the main circuit . 67 9.13.3 Capability of withstanding high d.c. voltages due to insulation measurement

45、s . 68 9.14 EMC compliance and unwanted tripping 68 9.14.1 Electromagnetic compatibility (EMC) . 68 9.14.2 Verification of resistance against unwanted tripping due to surge currents to earth resulting from impulse voltages for SRCDs of In 0,010 A (ring wave test) . 69 9.15 Verification of the behavi

46、our of the SRCD under overcurrent conditions 69 9.15.1 List of the overcurrent tests . 69 9.15.2 Short-circuit tests 70 9.15.3 Verification of the making and breaking capacity of the socket-outlet of the SRCD, classified according to 4.2.1 . 76 9.16 Verification of clearances of the SRCD with the im

47、pulse withstand voltage test 77 9.17 Mechanical and electrical endurance . 78 9.17.1 Normal operation of socket-outlets of the SRCD 78 9.17.2 Test of the RCD part of the SRCD . 78 9.18 Resistance to mechanical shock 80 9.18.1 General . 80 9.18.2 Impact test apparatus 80 9.18.3 Surface type SRCD . 83

48、 9.18.4 Screwed glands . 84 9.18.5 Shuttered SRCDs 84 9.19 Reliability 84 9.19.1 Climatic test 85 9.19.2 Test with temperature of 40 C 86 9.20 Protection against electric shock and degree of protection IP of the SRCD 87 9.20.1 Protection against electric shock . 87 9.20.2 Degree of protection IP of

49、the SRCD . 88 9.21 Resistance to heat 88 9.21.1 General . 88 9.21.2 Conditioning 88 9.21.3 External parts of SRCDs 88 9.21.4 External Insulating parts 89 9.22 Resistance to abnormal heat and to fire Glow-wire test 89 9.23 SRCDs with overcurrent protection 90 6 62640 IEC:2011 9.23.1 Verification of the operating characteristic under overcurrent conditions 90 9.23.2 Short-circuit tests for SRCDs according to 4.9 c) 2) . 91 9.23.3 Condition of