NASM 22529-1999 Grommet, Edging.PDF
《NASM 22529-1999 Grommet, Edging.PDF》由会员分享,可在线阅读,更多相关《NASM 22529-1999 Grommet, Edging.PDF(10页珍藏版)》请在麦多课文档分享上搜索。
1、NASM 22529-1999 Grommet, Edging_NAsM2252 9 ADOPTION NOTICE NASM22529, GROMMET, EDGING, was adopted on 31 MARCH 1999 for use by the Department of Defense (DoD). Proposed changes by DoD Activities must be submitted to the DoD Adopting Activity: Defense Industrial Supply Center, ATTN: DISC-AESD, 700 Ro
2、bbins Avenue, Philadelphia, PA 19111-5096. DoD Activities may obtain copies of this standard from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094. The private sector and other Government agencies may purchase copies from the AEROSPACE INDUSTRIES
3、ASSOCIATION OF AMERICA, INC., 1250 EYE STREET, N. W., WASHINGTON, DC 20005-3924. -2529 Adoption Notice dated 31 MARCH 1999, is superseded by this Adoption Notice dated 1 APRIL 1999, because NASM22529 was not issued until APRIL 1999. custodians : Navy - AS Air Force - 99 DLA- I S Adopting activity :
4、DIA-IS (Project 5325-0453) AMSC N/A FSC 5325 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. COPYRIGHT Aerospace Industries Association of America, Inc. (AIA/NAS)Licensed by Information Handling ServicesNATIONAL AEROSPACE STANDARD 0 COPYRIGHT 1999 AEROSPACE INDUSTRI
5、ES ASSOCIATION OF AMERICA, INC. ALL RIGHTS RESERVED NASM22529 SPECIFICATION GROMMET, EDGING 1. SCOPE l. 1 Scope. This specification covers three types of edging grommets; a plastic caterpillar style applied with an adhesive, and two spring-style, stainless steel based composite grommets requiring no
6、 adhesives. Edging grommets are used to provide abrasion protection of electrical current carrying wires and cable bundles routed through metal structures. 2. APPLICABLE DOCUMENTS 2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This section
7、does not include documents in other sections of this specification or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements documents cited in sectio
8、ns 3 and 4 of this specification, whether or not they are listed. 2.2 Government documents. 2.2.1 Specification, standards and handbooks. The following specifications, standards and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these
9、 documents are those listed in the issue of the Department of Defense Index of Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation (see 6.2). SPECIFICATIONS FEDERAL TT-1-735 Isopropyl Alcohol PPP-H-1581 - Hardware (Fasteners And Related Items) Packaging Of DEPARTM
10、ENT OF DEFENSE MIL-H-5606 - Hydraulic Fluid, Petroleum Base, Aircraft Missile And Ordnance MIL-T-5624 - Turbine Fuels, Aviation Grades JP-4, JP-5, and YJP-8 ST MIL-L-7808 - Lubricating Oil, Aircraft Turbine Engine, Synthetic Base THE INITIAL RELEASE OF THIS DOCUMENT SUPERSEDES MIL-DTL-22529, REVISIO
11、N D, ADMENDMENT 2. LIST OF CURRENT SHEETS No. I Rev I No. I Rev 1 NEW 6 NEW .2 NEW 5 NEW 3 NEW 8 NEW 4 NEW 7 NEW 1 OF8 APPROVAL DATE APRIL 1999 REVISION FSC 5325 USE OF OR RELIANCE UPON THIS DOCUMENT OR ANY NATIONAL AEROSPACE STANDARD IS ENTIRELY VOLUNTARY. AIA DOES NOT QUALIFY SUPPLIERS OR CERTIFY
12、CONFORMANCE OF ITEMS PRODUCED UNDER NATIONAL AEROSPACE STANDARDS. AIA MAKES NO REPRESENT.ATION OR CLAIM RESPECTING (I) THE SUlTABLlTY OF ITEMS FOR ANY PARTICULAR APPLICATION OR (2) THE EXlSTENCE OF OR APPLICABILITY THERETO OF PATENT OR TRADEMARK RIGHTS COPYRIGHT Aerospace Industries Association of A
13、merica, Inc. (AIA/NAS)Licensed by Information Handling ServicesSTD*AIA/NAS NASM22527-ENGL 1779 W 03L87Li3 050b504 7T3 NATIONAL AEROSPACE STANDARD Q COPYIUGHT 1999 AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA, INC. ALL NGHTS RESERVED NASM22529 STANDARDS DEPARTMENT OF DEFENSE MIL-STD- 129 Marking for S
14、hipment and Storage (Part 1 of 4 Parts) MIL-STD-202 Electronic and Electrical Component Parts, Test Methods For MS2 1266 Grommet, Edging Plastic MIL-DTL-22529/1 Grommet, Composite, Edging MIL-DTL-22529/2 Grommet, Cushion, Composite, Edging (Unless otherwise indicated, copies of specifications, stand
15、ards and handbooks are available from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 191 11-5094.) 2.3 Non-Government publications.The following document forms a part of this specification to the extent specified herein. Unless otherwise specified, the iss
16、ues of the documents which are DoD adopted shall be those listed in the issue of the DODISS specified in the solicitation. Unless otherwise specified, the issues of documents not listed in the DODISS are the issue of the documents cited in the solicitation (see 6.2). AMERICAN SOCIETY FOR TESTING AND
17、 MATERIALS (ASTM) ASTM D1457 - Standard specification for Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials ASTM D4066 - Standard Specification for Nylon Inspection and Extrusion Material (Copies of ASTM publication may be obtained from the American Society for Testing and Materials, 19
18、 16 Race Street, Philadelphia, PA 19103-1187.) MUNSELL COLOR COMPANY, INC. Munsell Book of Color (Copies of the Munsell Book of Color may be obtained from the Munsell Color Company, Inc., 2441 N. Calvert Street. Baltimore, MD 2 12 18-5204.) 2.4 Order of precedence. In the event of a conflict between
19、 the text of this document and the references cited herein the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS 3.1 Specification sheets. The individual grommet require
20、ments shall be in accordance with MS21266 or MIL-DTL-22529/1 and MIL-DTL-22529/2. In the event of any conflict between requirements of this specification and the Specification Sheets, the latter shall govern. 2 APPROVAL DATE APRIL 1999 REVISION USE OF OR RELIANCE UPON THIS DOCUMENT OR ANY NATIONAL A
21、EROSPACE STANDARD IS ENTIRELY VOLUNTARY. AIA DOES NOT QUALIFY SLPPLIERS OR CERTIFY CONFORMANCE OF ITEMS PRODUCED UNDER NATIONAL AEROSPACE STANDARDS. AIA MAKES NO REPRESENTATION OK CLAIM RESPECTING (I) THE SUITABLITY OF ITEMS FOR ANY PARTICULAR APPLICATION OR (2) THE EXISTENCE OF OR APPLICABILITY THE
22、RETO OF PATENT OR TRADEMARK RIGHTS COPYRIGHT Aerospace Industries Association of America, Inc. (AIA/NAS)Licensed by Information Handling ServicesNATIONAL AEROSPACE STANDARD O COPYRIGHT 1999 AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA, INC. ALL RIGHTS RESERVED NASM22529 3.2 Performance. 3.2.1 Dielect
23、ric withstanding voltage (dielectric strength). There shall be no disruptive discharge, nor any deterioration of the grommet when subjected to Dielectric Strength Test specified in 4.2.9. This requirement shall modified per MIL-DTL-22529/1 and MIL-DTL-22529/2. 3.2.2 Immersion. The grommets shall sho
24、w no evidence of cracking, pitting or material failure, after subjection to the immersion test specified in 4.2.5. 3.2.3 Temperature cycling. The grommets shall show no evidence of cracking, pitting or material failure, after subjection to the temperature test specified in 4.2.6. 3.2.4 High Temperat
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
5000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- NASM 22529 1999 Grommet Edging