IEC 61133-2006 铁路设施 铁路车辆 车辆组装后和运行前的整车试验.pdf

《IEC 61133-2006 铁路设施 铁路车辆 车辆组装后和运行前的整车试验.pdf》由会员分享，可在线阅读，更多相关《IEC 61133-2006 铁路设施 铁路车辆 车辆组装后和运行前的整车试验.pdf（136页珍藏版）》请在麦多课文档分享上搜索。

1、This International Standard specifies general criteria to demonstrate by testing that newlyconstructed complete railway vehicles conform with standards or other normative documents.This standard, as a whole or in part, applies to all railway vehicles except special purposevehicles such as track-layi

2、ng machines, ballast cleaners and personnel carriers. The extent ofapplication of the standard for particular vehicles will be specifically mentioned in thecontract.NOTE 1 The parts of the standard which are applicable will depend on the type of vehicle (e.g. passenger, freight,powered trailer, etc.

3、).NOTE 2: The scope of this standard excludes railbound and road/rail vehicles for construction and maintenanceof railway infrastructure.NOTE 3 This standard does not deal with tests carried out on components or equipment before fitting to thevehicle.Insofar as this standard is applicable it may be

4、used for the following: generator sets mounted on a vehicle provided for auxiliary purposes; the electrical transmission used on trolley buses or similar vehicles; control and auxiliary equipment of vehicles with non-electrical propulsion systems; vehicles guided, supported or electrically propelled by systems which do not use theadhesion between wheel and rail.