BS EN 14605-2005 液态化学物质防护服装.包含只提供部分身体保护的不透水(3型)或防喷洒渗透(4型)连接的服装的性能要求(类型PB [3]和PB [4]).pdf

《BS EN 14605-2005 液态化学物质防护服装.包含只提供部分身体保护的不透水(3型)或防喷洒渗透(4型)连接的服装的性能要求(类型PB [3]和PB [4]).pdf》由会员分享，可在线阅读，更多相关《BS EN 14605-2005 液态化学物质防护服装.包含只提供部分身体保护的不透水(3型)或防喷洒渗透(4型)连接的服装的性能要求(类型PB [3]和PB [4]).pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、This document specifies the minimum requirements for the following types of limited use and reusablechemical protective clothing:? Full-body protective clothing with liquid-tight connections between different parts of the clothing (Type 3:liquid-tight clothing) and, if applicable, with liquid-tight

2、connections to component parts, such as hoods,gloves, boots, visors or respiratory protective equipment, which may be specified in other EuropeanStandards.Examples of such clothing are one-piece coveralls or two-piece suits, with or without hood or visors, withor without boot-socks or over-boots, wi

3、th or without gloves;? Full-body protective clothing with spray-tight connections between different parts of the clothing (Type 4:spray-tight clothing) and, if applicable, spray-tight connections to component parts, such as hoods, gloves,boots, visors or respiratory protective equipment, which may b

4、e specified in other European Standards.Examples of such clothing are one-piece coveralls or two-piece suits, with or without hood or visors, withor without boot-socks or over-boots, with or without gloves;? Partial body protection garments offering protection to specific parts of the body against p

5、ermeation ofchemical liquids.Examples of such garments are e.g. laboratory coats, jackets, trousers, aprons, sleeves, hoods (not airsupplied)etc. As partial body protection leaves some parts of the body unprotected this documentspecifies only the performance requirements for the clothing material and the seams.