VA 12 31 00-2011 MANUFACTURED METAL CASEWORK.pdf
《VA 12 31 00-2011 MANUFACTURED METAL CASEWORK.pdf》由会员分享,可在线阅读,更多相关《VA 12 31 00-2011 MANUFACTURED METAL CASEWORK.pdf(15页珍藏版)》请在麦多课文档分享上搜索。
1、04-11 12 31 00 - 1 SECTION 12 31 00 MANUFACTURED METAL CASEWORK SPEC WRITER NOTES: 1. Delete between /_/ if not applicable to project. 2. Delete other item or paragraph not applicable in the section and renumber the paragraphs. 3. Verify details are shown on drawings. PART 1 - GENERAL 1.1 DESCRIPTIO
2、N A. This section specifies metal casework and related accessories, including base cabinets, wall cabinets, and full height cabinets. B. Items specified in this section: 1. Laboratory and Hospital Casework: Prefixed by “VL“ AND “M“, including metal casework of the following types: a. Wardrobe Cabine
3、t, Metal, 5A (SD123100-02). b. Wall Cabinet, Metal, 5B (SD123100-01). 1.2 RELATED WORK A. Color of casework finish: Section 09 06 00, SCHEDULE FOR FINISHES. B. Electrical Components: Division 26, ELECTRICAL. 1.3 QUALITY ASSURANCE A. Approval by Contracting Officer of proposed manufacturer, or suppli
4、ers, will be based upon submission by Contractor certification that, manufacturer regularly and presently manufactures casework specified as one of their principal products. B. Installer has technical qualifications, experience, trained personnel, and facilities to install specified items. C. Furnis
5、h supervision of installation at construction site by a qualified technician regularly employed by casework installer. 1.4 SUBMITTALS A. Submit in accordance with Section 01 33 23, SHOP DRAWINGS, PRODUCT DATA, AND SAMPLES. B. Certificates: 1. Manufacturers Certificate of qualifications specified and
6、 finish on casework. 2. Contractors Certificate of installers qualifications specified. 3. Safety glass meets requirements of ANSI Standard Z97.1. C. Manufacturers Literature and Data: 1. Brochures showing name and address of manufacturer, and catalog or model number of each item incorporated into t
7、he work. 2. Manufacturers illustration and detailed description. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-04-11 12 31 00 - 2 3. List of deviations from contract specifications. 4. Locks, each kind D. Shop Drawings (1/2 Full Scale): 1. Showing
8、details of casework construction, including kinds of materials and finish, hardware, accessories and relation to finish of adjacent construction, including specially fabricated items or components. 2. Fastenings and method of installation. 3. Location of service connections and access. E. Samples: 1
9、. Metal plate, 150 mm (six inch) square, showing chemical resistant finish, in each color. 2. One complete casework assembly, including cabinet(s) with drawers and cupboard. 3. One glazed sliding door with track and pertinent hardware. A complete cabinet may be submitted to fulfill this requirement.
10、 4. Cabinets for subsequent installation may be submitted for above requirements. 1.5 APPLICABLE PUBLICATIONS A. Publications listed below form a part of this specification to extent referenced. Publications are referenced in the text by basic designation only. SPEC WRITER NOTE: Update applicable pu
11、blications to current issue at time of project specification preparation. B. American Society for Testing and Materials (ASTM): A36/A36M-08 Carbon Structural Steel A167-99(R 2009) Stainless and Heat-Resisting Chromium Steel Plate Sheet and Strip A283/A283M-03(R 2007) Low and Intermediate Tensile Str
12、ength Carbon Steel Plates A568/A568M-09 Steel, Sheet, Carbon and High-Strength, Low-Alloy Hot-Rolled and Cold-Rolled, General Requirements A794/A794M-09 Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16% Maximum to 0.25% Maximum) Cold Rolled B456-03(R2009) . Electrodeposited Coat
13、ings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium C1036-06 . Flat Glass C. American National Standard Institute: Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-04-11 12 31 00 - 3 Z97.1-09 . Safety Glazing Material used In Buildings D
14、. Builders Hardware Manufacturers Association (BHMA): A156.1-06 Butts and Hinges A156.9-10 Cabinet Hardware A156.5-10 Auxiliary Locks and Associated Products A156.11-10 . Cabinet Locks A156.16-02 . Auxiliary Hardware E. American Welding Society (AWS): D1.1-10 Structural Welding Code Steel D1.3-08 St
15、ructural Welding Code Sheet Steel F. National Association of Architectural Metal Manufacturers (NAAMM): AMP 500-505-06 Series Metal Finishes Manual G. U.S. Department of Commerce, Product Standard (PS): PS 1-95 Construction and Industrial Plywood H. Federal Specifications (Fed. Spec.): FF-N-836D Nut
16、, Square, Hexagon Cap, Slotted, Castle Knurled, Welding and Single Ball Seat A-A-55615 Shield, Expansion; Nail Expansion (Wood Screw and Lag Bolt Self-Threading Anchors) SPEC WRITER NOTES: 1. Update materials requirements to agree with applicable requirements (types, grades, classes,) specified in r
17、eferenced Applicable Publications. 2. Coordinate and edit to certain only that which applies to project in parts 1 and 2. PART 2 - PRODUCTS 2.1 MATERIALS A. Sheet Steel: 1. ASTM A794, cold rolled, Class 1 finish, stretcher leveled. 2. Other types of cold rolled steel meeting requirements of ASTM A56
18、8 may be used for concealed parts. B. Structural Steel: ASTM A283 or ASTM A36. C. Stainless Steel: ASTM A167, Type 302B. D. Glass: 1. ASTM C1036 Type I, Class 1, Quality q3, 2. For Doors: 6 mm (1/4 inch) thick; except where laminated glass is shown. 3. For shelves: Either 6 mm (1/4 inch) or 9 mm (3/
19、8 inch) thick. E. Laminated Glass: Fabricate of two sheets of 3 mm (1/8 inch) thick clear glass, laminated together with a 1.5 mm (0.060 inch) thick vinyl interlayer, to a total overall thickness of 8 mm (5/16 inch). Provided by IHSNot for ResaleNo reproduction or networking permitted without licens
20、e from IHS-,-,-04-11 12 31 00 - 4 F. Glazing Cushions: 1. Channel shaped, of rubber, vinyl or polyethylene plastic, with vertical flanges not less than 2 mm (3/32 inch) thick and horizontal web 3 mm (1/8 inch) thick. 2. Flanges may have bulbous terminals above the glazing heads or terminate flush wi
21、th top of beads. G. Plywood: 1. Prod. Std. PS 1, seven ply, interior. 2. Where both sides are exposed, use Grade AA. 3. Grade AB for other uses. H. Fasteners: 1. Exposed to view, chrome plated steel or stainless steel, or finished to match adjacent surface. 2. Use round head or countersunk fasteners
22、 where exposed in cabinets. 3. Expansion Bolts: Fed Spec. A-A-55615. Do not use lead or plastic shields. 4. Nuts: Fed Spec FF-N-836. Type III, Style 15 where exposed. 5. Sex Bolts: Capable of supporting twice the load. 2.2 MANUFACTURED PRODUCTS A. When two or more units are required, use products of
23、 one manufacturer. B. Manufacturer of equipment assemblies, which include components made by other, shall assume complete responsibility for the final assembled unit. C. Constituent parts which are alike, use products of a single manufacturer. 2.3 CASEWORK FABRICATION A. General: 1. Welding: Comply
24、with AWS Standards. 2. Reinforce with angles, channels, and gussets to support intended loads, notch tightly, fit and weld joints. 3. Constructed of sheet steel, except where reinforcing required. B. Minimum Steel Thickness: 0.89 mm (0.035 inch) (20 gage) Drawer fronts, backs, bodies, closure plates
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- VA1231002011MANUFACTUREDMETALCASEWORKPDF
