VA 04 05 13-2011 MASONRY MORTARING.pdf

《VA 04 05 13-2011 MASONRY MORTARING.pdf》由会员分享，可在线阅读，更多相关《VA 04 05 13-2011 MASONRY MORTARING.pdf（6页珍藏版）》请在麦多课文档分享上搜索。

1、09-11 04 05 13- 1 SECTION 04 05 13 MASONRY MORTARING SPEC WRITER NOTE: Delete between / - / if not applicable to project. Also delete any other item or paragraph not applicable in the section and renumber the paragraphs. PART 1 - GENERAL 1.1 DESCRIPTION: Section specifies mortar materials and mixes.

2、 1.2 RELATED WORK: A. Mortar used in Section: 1. Section 03 45 00, PRECAST ARCHITECTURAL CONCRETE. 2. Section 04 05 16, MASONRY GROUTING. 3. Section 04 20 00, UNIT MASONRY. 4. Section 04 05 31, MASONRY TUCK POINTING. 5. Section 04 72 00, CAST STONE MASONRY. B. Mortar Color: Section 09 06 00, SCHEDUL

3、E FOR FINISHES. SPEC WRITER NOTE: Do not require testing on station level projects, or small alteration projects. Coordinate with Section 01 45 29, TESTING LABORATORY SERVICES. 1.3 TESTING LABORATORY-CONTRACTOR RETAINED A. Engage a commercial testing laboratory approved by Resident Engineer to perfo

4、rm tests specified below. B. Submit information regarding testing laboratorys facilities and qualifications of technical personnel to Resident Engineer. 1.4 TESTS A. Test mortar and materials specified. B. Certified test reports. C. Identify materials by type, brand name and manufacturer or by origi

5、n. D. Do not use materials until laboratory test reports are approved by Resident Engineer. E. After tests have been made and materials approved, do not change without additional test and approval of Resident Engineer. F. Testing: 1. Test materials proposed for use for compliance with specifications

6、 in accordance with test methods contained in referenced specifications and as follows: 2. Mortar: a. Test for compressive strength and water retention; ASTM C270. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-09-11 04 05 13- 2 b. Mortar compressiv

7、e strengths 28 days as follows: Type M: Minimum 17230 kPa (2500 psi) at 28 days. Type S: Minimum 12400 kPa (1800 psi) at 28 days. Type N: Minimum 5170 kPa (750 psi) at 28 days. 3. Cement: a. Test for water soluble alkali (nonstaining) when nonstaining cement is specified. b. Nonstaining cement shall

8、 contain not more than 0.03 percent water soluble alkali. 4. Sand: Test for deleterious substances, organic impurities, soundness and grading. /5. High Bond Mortar: Test for compressive strength, tensile strength, flexural strength, and brick bond strength. / /G. During progress of work, testing lab

9、oratory specified in Section 01 45 29, TESTING LABORATORY SERVICES, takes and tests samples as specified in that section. Testing procedures and test methods in ASTM C780. / 1.5 SUBMITTALS A. Submit in accordance with Section 01 33 23, SHOP DRAWINGS, PRODUCT DATA, AND SAMPLES. B. Certificates: /1. T

10、esting laboratorys facilities and qualifications of its technical personnel. / 2. Indicating that following items meet specifications: a. Portland cement. b. Masonry cement. c. Mortar cement. d. Hydrated lime. e. Fine aggregate (sand). /g. Color admixture. C. Laboratory Test Reports: 1. Mortar, each

11、 type. 2. Admixtures. D. Manufacturers Literature and Data: 1. Cement, each kind. 2. Hydrated lime. 3. Admixtures. 4. Liquid acrylic resin. 1.6 PRODUCT DELIVERY, STORAGE AND HANDLING A. Deliver masonry materials in original sealed containers marked with name of manufacturer and identification of con

12、tents. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-09-11 04 05 13- 3 B. Store masonry materials under waterproof covers on planking clear of ground, and protect damage from handling, dirt, stain, water and wind. 1.7 APPLICABLE PUBLICATIONS A. Pub

13、lications listed below form a part of specification to extent referenced. Publications are referenced in text by basic designation only. B. American Society for Testing and Materials (ASTM): C40-04 . Organic Impurities in Fine Aggregates for Concrete C91-05 . Masonry Cement C109-08 Compressive Stren

14、gth of Hydraulic Cement Mortars (Using 2-in. or 50-MM Cube Specimens) C144-04 Aggregate for Masonry Mortar C150-09 Portland Cement C207-06 Hydrated Lime for Masonry Purposes C270-10 Mortar for Unit Masonry C307-03(R2008) . Tensile Strength of Chemical - Resistant Mortar, Grouts, and Monolithic Surfa

15、cing C321-00(R2005) . Bond Strength of Chemical-Resistant Mortars C348-08 Flexural Strength of Hydraulic Cement Mortars C595-10 Blended Hydraulic Cement C780-10 Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry C979-10 Pigments for Integrally Colored Concre

16、te C1329-05 . Mortar Cement PART 2 - PRODUCTS SPEC WRITER NOTE: Make material requirements agree with applicable requirements specified in the referenced Applicable Publications. Update and specify only that which applies to the project. 2.1 HYDRATED LIME ASTM C207, Type S. 2.2 AGGREGATE FOR MASONRY

17、 MORTAR A. ASTM C144 and as follows: 1. Light colored sand for mortar for laying face brick. 2. White plastering sand meeting sieve analysis for mortar joints for pointing / and laying of structural facing tile units except that 100 percent passes No. 8 sieve, and not more than 5 percent retained on

18、 No. 16 sieve. / Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-09-11 04 05 13- 4 B. Test sand for color value in accordance with ASTM C40. Sand producing color darker than specified standard is unacceptable. 2.3 BLENDED HYDRAULIC CEMENT ASTM C595,

19、Type IS, IP. 2.4 MASONRY CEMENT A. ASTM C91. Type N, S, or M. /B. Use white masonry cement whenever white mortar is specified. / 2.5 MORTAR CEMEMT ASTM C1329, Type N, S or M. 2.6 PORTLAND CEMENT A. ASTM C150, Type I. /B. Use white Portland cement wherever white mortar is specified. / 2.7 LIQUID ACRY

20、LIC RESIN A formulation of acrylic polymers and modifiers in liquid form designed for use as an additive for mortar to improve physical properties. 2.8 WATER Potable, free of substances that are detrimental to mortar, masonry, and metal. 2.9 POINTING MORTAR A. For Cast Stone or Precast Concrete: Pro

21、portion by volume; One part white Portland cement, two parts white sand, and 1/5 part hydrated lime. /B. Pointing Mortar for Glazed Structural Facing Tile: 1. Proportion by volume: One part white Portland cement, two parts of graded white sand passing Number 50 sieve, and 1/8 part hydrated lime./ /2

22、. Pointing mortar in shower: Add aluminum tri-stearate, calcium stearate, or ammonium stearate in amount of two percent of weight of cement used. / 2.10 MASONRY MORTAR A. Conform to ASTM C270. B. Admixtures: 1. Do not use mortar admixtures, / except for high bond mortar, / and color admixtures / unl

23、ess approved by Resident Engineer. 2. Submit laboratory test report showing effect of proposed admixture on strength, water retention, and water repellency of mortar. 3. Do not use antifreeze compounds. C. Colored Mortar: 1. Maintain uniform mortar color for exposed work throughout. 2. Match mortar

24、color in approved sample / or mock-up. / Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-09-11 04 05 13- 5 3. Color of mortar for exposed work in alteration work to match color of existing mortar unless specified otherwise in section 09 06 00, SCHEDU

25、LE FOR FINISHES. D. Color Admixtures: 1. Proportion as specified by manufacturer. 2. For color, see Section 09 06 00, SCHEDULE FOR FINISHES. 2.11 HIGH BOND MORTAR A. Mixture by volume, one-part Portland cement, 1/4-part hydrated lime, three-parts sand, water, and liquid acrylic resin. B. Mortar prop

26、erties when tested in accordance with referenced specifications. 1. Compressive Strength, ASTM C109: Minimum 19,305 kPa (2800 psi), using 50 mm (2 inch) cubes. 2. Tensile Strength, ASTM C307: 3861 kPa Minimum (560 psi), using the 25mm (1 inch) briquettes. 3. Flexural Strength, ASTM C348: Minimum 606

27、7 kPa (880 psi), using flexural bar. 4. Bond Strength, ASTM C321: Minimum 2965 kPa (430 psi), using crossed brick. SPEC WRITER NOTE: Use following paragraph when drawings show reinforcement in wall cavities or vertical reinforcement in cells of CMU. 2.12 COLOR ADMIXTURE A. Pigments: ASTM C979. B. Us

28、e mineral pigments only. Organic pigments are not acceptable. C. Pigments inert, stable to atmospheric conditions, nonfading, alkali resistant and water insoluble. PART 3 - EXECUTION 3.1 MIXING A. Mix in a mechanically operated mortar mixer. 1. Mix mortar for at least three minutes but not more than

29、 five minutes. B. Measure ingredients by volume. Measure by the use of a container of known capacity. C. Mix water with dry ingredients in sufficient amount to provide a workable mixture which will adhere to vertical surfaces of masonry units. /D. Mortar that has stiffened because of loss of water t

30、hrough evaporations: 1. Re-tempered by adding water to restore to proper consistency and workability. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-09-11 04 05 13- 6 2. Discard mortar that has reached its initial set or has not been used within two

31、 hours. E. Pointing Mortar: 1. Mix dry ingredients with enough water to produce a damp mixture of workable consistency which will retain its shape when formed into a ball. 2. Allow mortar to stand in dampened condition for one to 1-1/2 hours. 3. Add water to bring mortar to a workable consistency pr

32、ior to application. / 3.2 MORTAR USE LOCATION A. Use Type M mortar for / precast concrete panels, / and / waterproof parging below grade, /. B. Use Type S mortar for / masonry containing vertical reinforcing bars (non-engineered) / masonry below grade / masonry solar screens / and / setting cast sto

33、ne / and / engineered reinforced unit masonry work /. C. For brick veneer over frame back up walls, use Type N portland cement-lime mortar or Type S masonry cement or mortar cement mortar. D. Use Type N mortar for other masonry work, except as otherwise specified. E. Use Type N mortar for tuck pointing work. / /F. Use pointing mortar for items specified. / - - - E N D - - - Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-