UL SUBJECT 1029A-2006 OUTLINE OF INVESTIGATION FOR IGNITORS AND RELATED AUZILIARIES FOR HID LAMP BALLASTS (Issue 1)《高压气体放电灯(HID)镇流器用点火器和相关附件调查大纲》.pdf
《UL SUBJECT 1029A-2006 OUTLINE OF INVESTIGATION FOR IGNITORS AND RELATED AUZILIARIES FOR HID LAMP BALLASTS (Issue 1)《高压气体放电灯(HID)镇流器用点火器和相关附件调查大纲》.pdf》由会员分享,可在线阅读,更多相关《UL SUBJECT 1029A-2006 OUTLINE OF INVESTIGATION FOR IGNITORS AND RELATED AUZILIARIES FOR HID LAMP BALLASTS (Issue 1)《高压气体放电灯(HID)镇流器用点火器和相关附件调查大纲》.pdf(54页珍藏版)》请在麦多课文档分享上搜索。
1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULOctober 9, 20061SUBJECT 1029AOUTLINE OF INVESTIGATIONFORIGNITORS AND RELATED AUXILIARIES FOR HID LAMP BALLASTSIssue Number: 1OCTOBER 9, 2006Summary of TopicsThis is the first issue of the Outline
2、 of Investigation for Ignitors andRelated Auxiliaries for HID Lamp Ballasts.The UL Foreword is no longer located within the UL Outline of Investigation. Forinformation concerning the use and application of the requirements contained inthis Outline of Investigation, the current version of the UL Fore
3、word is located onULStandardsInfoNet at: http:/ 2006 UNDERWRITERS LABORATORIES INC.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULOCTOBER 9, 2006SUBJECT 1029A2No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION
4、 ORDISTRIBUTION WITHOUT PERMISSION FROM ULCONTENTSINTRODUCTION1 Scope .52 General 52.1 Components .52.2 Units of measurement .62.3 Reference publications 63 Glossary .7CONSTRUCTION4 Construction 84.1 Types of devices .84.2 Enclosure .94.3 Resistance to corrosion 124.4 Means for mounting .134.5 Compo
5、und (potting) 134.6 Installation supply and load connections (terminals) 144.7 Wire .174.8 Grounding 184.9 Electrical parts 204.10 Electrical insulation .204.11 Clearances and creepage distances 214.12 Polymeric materials .254.13 Printed wiring boards .284.14 Power capacitors .284.15 Thermal protect
6、ion .304.16 Over-current protection 31PERFORMANCE5 Tests .325.1 General notes on tests and sample requirements .325.2 Normal operation 345.3 Abnormal operation 385.4 Mechanical tests 396 Instrumentation and Test Apparatus 446.1 General notes on tests and sample requirements .446.2 Output measurement
7、s .456.3 Temperature test 456.4 Dielectric voltage withstand test .466.5 Lamp abnormal conditions 466.6 Component abnormal conditions 466.7 Recessed use abnormal 466.8 Enclosure impact 466.9 Strain relief test .466.10 Pullout, bending, and torque tests 476.11 Water spray test .476.12 Method of measu
8、rement for terminal compartment volume 477 Manufacturing and Production Tests .47OCTOBER 9, 2006 SUBJECT 1029A 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM UL7.1 Production-line dielectric voltage-withstand test .47MARKING8 General .49APPEND
9、IX AStandards for ComponentsA1UL Standards .A1OCTOBER 9, 2006SUBJECT 1029A4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULINTRODUCTION1 Scope1.1 These requirements address the construction requirements and tests for ignitors for high intensit
10、ydischarge (HID) lamps that require an external starting pulse or pulses. These requirements are forignitors that could be mounted outside of or remote from a luminaire as well as ignitors that must beinstalled within the electrical enclosure of a luminaire or sign.1.2 These requirements include 2,
11、3, and 4 wire ignitors for use with high-pressure sodium and metalhalide lamps, as well as ignitors known as hot re-strike type.1.3 These requirements also cover certain auxiliaries for HID lamps and ballasts: two level dimming (bycapacitors), time-out circuits, and controls for auxiliary tungsten l
12、amps.1.4 These requirements do not cover ballasts that connect with the devices covered by this outline.2 General2.1 Components2.1.1 Except as indicated in 2.1.2, a component of a product covered by this outline shall comply with therequirements for that component. See Appendix A for a list of stand
13、ards covering components used in theproducts covered by this outline.2.1.2 A component is not required to comply with a specific requirement that:a) Involves a feature or characteristic not required in the application of the component in theproduct covered by this outline, orb) Is superseded by a re
14、quirement in this outline.2.1.3 A component shall be used in accordance with its rating established for the intended conditions ofuse.2.1.4 Specific components are incomplete in construction features or restricted in performancecapabilities. Such components are intended for use only under limited co
15、nditions, such as certaintemperatures not exceeding specified limits, and shall be used only under those specific conditions.OCTOBER 9, 2006 SUBJECT 1029A 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM UL2.2 Units of measurement2.2.1 Except fo
16、r conductor size, values stated without parentheses are the requirement. Values inparentheses are explanatory or approximate information.2.2.2 All values of voltage and current are true root mean square (rms) values unless otherwise indicated.2.2.3 For customary purposes wire sizes are in American W
17、ire Gauge (AWG).2.3 Reference publications2.3.1 Any undated reference to a code or standard appearing in the requirements of this outline ofinvestigation shall be interpreted as referring to the latest edition of the code or standard.ASTM (American Society for Testing Materials)ASTM 653Standard Spec
18、ification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated(Galvannealed) by the Hot-Dip ProcessNFPA (National Fire Protection Association)NFPA 70National Electrical CodeIEC (International Electrotechnical Commission)IEC 61347-1Lamp controlgear Part 1: General and safety requiremen
19、tsISA (The Instrumentation, Systems, and Automation Society)ISA MC 96.1Temperature Measurement ThermocouplesUL StandardsUL 1029Standard for High-Intensity-Discharge Lamp BallastsOCTOBER 9, 2006SUBJECT 1029A6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMIS
20、SION FROM UL3 Glossary3.1 For the purpose of this outline the following definitions apply:3.2 DEVICE A term, when used, refers to all devices covered by this outline. Requirements pertainingto specific devices are so noted.3.3 DEVICE, BUILT-IN A device specifically designed to be contained within a
21、luminaire or theelectrical enclosure of a sign. A device with lead wires or terminals that are not enclosed would beconsidered a built-in device.3.4 DEVICE, INDEPENDENT A device that has its own enclosure and can be mounted separately orattached to the outside of a luminaire or sign without any addi
22、tional enclosure. This may consist of abuilt-in device housed in a suitable enclosure which provides all the necessary protection according toits rating. A device not identified as an independent device would be considered, by default, to be built-in.3.5 IGNITOR A device intended to generate voltage
23、 pulses to start discharge lamps and which doesnot provide for the preheating of electrodes.3.6 LOCATION, DRY A location not normally subject to dampness or wetness. A location classifiedas dry may be temporarily subject to dampness, for example, a building under construction.3.7 LOCATION, DAMP A lo
24、cation protected from weather and not subject to direct exposure orsaturation by water but subject to moderated degrees of moisture, for example, the inside of a sign orluminaire intended for wet locations.3.8 LOCATION, OUTDOOR See definition of damp location above.3.9 POWER CAPACITOR A capacitor th
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ULSUBJECT1029A2006OUTLINEOFINVESTIGATIONFORIGNITORSANDRELATEDAUZILIARIESFORHIDLAMPBALLASTSISSUE1 高压 气体放电灯
链接地址:http://www.mydoc123.com/p-1069123.html