UL 87-2001 UL Standard for Safety Power-Operated Dispensing Devices for Petroleum Products (Eleventh Edition Reprint with revisions through and including June 12 2008)《石油产品用动力配送装置》.pdf

《UL 87-2001 UL Standard for Safety Power-Operated Dispensing Devices for Petroleum Products (Eleventh Edition Reprint with revisions through and including June 12 2008)《石油产品用动力配送装置》.pdf》由会员分享，可在线阅读，更多相关《UL 87-2001 UL Standard for Safety Power-Operated Dispensing Devices for Petroleum Products (Eleventh Edition Reprint with revisions through and including June 12 2008)《石油产品用动力配送装置》.pdf（56页珍藏版）》请在麦多课文档分享上搜索。

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUL 87Power-Operated DispensingDevices for PetroleumProductsUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUT

2、HORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUnderwriters Laboratories Inc. (UL)333 Pfingsten RoadNorthbrook, IL 60062-2096UL Standard for Safety for Power-Operated Dispensing Devices for Petroleum Products, UL 87Eleventh Edition, Dated October 31, 2001Revisions: This St

3、andard contains revisions through and including June 12, 2008.Summary of TopicsThis revision to UL 87 is being issued to address universal upkeep of UL Standards for Safety.These revisions are considered to be non-substantive and not subject to ULs STP process.UL Standards for Safety are developed a

4、nd maintained in the Standard Generalized Markup Language(SGML). SGML - an international standard (ISO 8879-1986) - is a descriptive markup language thatdescribes a documents structure and purpose, rather than its physical appearance on a page. Due toformatting differences resulting from the use of

5、ULs new electronic publishing system, please note thatadditional pages (on which no requirements have been changed) may be included in revision pages dueto relocation of existing text and reformatting of the Standard.Text that has been changed in any manner is marked with a vertical line in the marg

6、in. Changes inrequirements are marked with a vertical line in the margin and are followed by an effective date noteindicating the date of publication or the date on which the changed requirement becomes effective.The revisions dated June 12, 2008 include a reprinted title page (page1) for this Stand

7、ard.As indicated on the title page (page1), this UL Standard for Safety has been adopted by the Departmentof Defense.The UL Foreword is no longer located within the UL Standard. For information concerning the use andapplication of the requirements contained in this Standard, the current version of t

8、he UL Foreword islocated on ULStandardsInfoNet at: http:/ master for this Standard at ULs Northbrook Office is the official document insofar as it relates to aUL service and the compliance of a product with respect to the requirements for that product and service,or if there are questions regarding

9、the accuracy of this Standard.ULs Standards for Safety are copyrighted by UL. Neither a printed copy of a Standard, nor the distributiondiskette for a Standard-on-Diskette and the file for the Standard on the distribution diskette should bealtered in any way. All of ULs Standards and all copyrights,

10、 ownerships, and rights regarding thoseStandards shall remain the sole and exclusive property of UL.All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, ortransmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwisewi

11、thout prior permission of UL.Revisions of UL Standards for Safety are issued from time to time. A UL Standard for Safety is currentonly if it incorporates the most recently adopted revisions.UL provides this Standard as is without warranty of any kind, either expressed or implied, including butnot l

12、imited to, the implied warranties of merchantability or fitness for any purpose.JUNE 12, 2008 UL 87 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULIn no event will UL be liable for any special, incidental, consequential, indirect or simila

13、r damages,including loss of profits, lost savings, loss of data, or any other damages arising out of the use of or theinability to use this Standard, even if UL or an authorized UL representative has been advised of thepossibility of such damage. In no event shall ULs liability for any damage ever e

14、xceed the price paid forthis Standard, regardless of the form of the claim.UL will attempt to answer support requests concerning electronic versions of its Standards. However, thissupport service is offered on a reasonable efforts basis only, and UL may not be able to resolve everysupport request. U

15、L supports the electronic versions of its Standards only if they are used under theconditions and operating systems for which it is intended. ULs support policies may change fromtime-to-time without notification.UL reserves the right to change the format, presentation, file types and formats, delive

16、ry methods andformats, and the like of both its printed and electronic Standards without prior notice.Purchasers of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and holdUL harmless from and against any loss, expense, liability, damage, claim, or judgement (includin

17、greasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing anelectronic Standard on the purchasers computer system.If a single-user version electronic Standard was purchased, one copy of this Standard may be stored onthe hard disk of a single personal com

18、puter, or on a single LAN file-server or the permanent storagedevice of a multiple-user computer in such a manner that this Standard may only be accessed by one userat a time and for which there is no possibility of multiple concurrent access.If a multiple-user version electronic Standard was purcha

19、sed, one copy of the Standard may be stored ona single LAN file-server, or on the permanent storage device of a multiple-user computer, or on an Intranetserver. The number of concurrent users shall not exceed the number of users authorized.Electronic Standards are intended for on-line use, such as f

20、or viewing the requirements of a Standard,conducting a word search, and the like. Only one copy of the Standard may be printed from eachsingle-user version of an electronic Standard. Only one copy of the Standard may be printed for eachauthorized user of a multiple-user version of an electronic Stan

21、dard. Because of differences in thecomputer/software/printer setup used by UL and those of electronic Standards purchasers, the printedcopy obtained by a purchaser may not look exactly like the on-line screen view or the printed Standard.An employee of an organization purchasing a UL Standard can ma

22、ke a copy of the page or pages beingviewed for their own fair and/or practical internal use.The requirements in this Standard are now in effect, except for those paragraphs, sections, tables, figures,and/or other elements of the Standard having future effective dates as indicated in the note followi

23、ng theaffected item. The prior text for requirements that have been revised and that have a future effective dateare located after the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice.New product submittals made prior to a specified future effective date will be judged under all of the

24、requirements in this Standard including those requirements with a specified future effective date, unlessthe applicant specifically requests that the product be judged under the current requirements. However, ifthe applicant elects this option, it should be noted that compliance with all the require

25、ments in thisStandard will be required as a condition of continued Listing, Recognition, and Follow-Up Services afterthe effective date, and understanding of this should be signified in writing.Copyright 2008 Underwriters Laboratories Inc.JUNE 12, 2008 UL 87tr2UL COPYRIGHTED MATERIAL NOT AUTHORIZED

26、FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULThis Standard consists of pages dated as shown in the following checklist:Page Date1-3.June 12, 20084-5 October 31, 20016.June 12, 20087-26 .October 31, 200127-32BJune 12, 200833-40 October 31, 200141June 12, 200842-46 October 31, 200

27、1A1-A2.June 12, 2008JUNE 12, 2008 UL 87 tr3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULJUNE 12, 2008 UL 87tr4No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULOCTOB

28、ER 31, 2001(Title Page Reprinted: June 12, 2008)1UL 87Standard for Power-Operated Dispensing Devices for Petroleum ProductsThe first and second editions were titled Power-Operated Discharge Devices. Thethird through sixth editions were titled Power-Operated Dispensing Devices forFlammable Liquids.Fi

29、rst Edition May, 1930Second Edition March, 1951Third Edition July, 1958Fourth Edition March, 1964Fifth Edition April, 1971Sixth Edition July, 1974Seventh Edition December, 1975Eighth Edition July, 1981Ninth Edition September, 1990Tenth Edition October, 1995Eleventh EditionOctober 31, 2001The Departm

30、ent of Defense (DoD) has adopted UL 87 on March 11, 1991. Thepublication of revised pages or a new edition of this Standard will not invalidatethe DoD adoption.Comments or proposals for revisions on any part of the Standard may besubmitted to UL at any time. Proposals should be submitted via a Propo

31、salRequest in ULs On-Line Collaborative Standards Development System (CSDS)at http:/.ULs Standards for Safety are copyrighted by UL. Neither a printed nor electroniccopy of a Standard should be altered in any way. All of ULs Standards and allcopyrights, ownerships, and rights regarding those Standar

32、ds shall remain thesole and exclusive property of UL.COPYRIGHT 2008 UNDERWRITERS LABORATORIES INC.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULJUNE 12, 2008POWER-OPERATED DISPENSING DEVICES FOR PETROLEUM PRODUCTS - UL 872No Text on This Pag

33、eUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULCONTENTSINTRODUCTION1 Scope .72 General 72.1 Components .72.2 Units of measurement .82.3 Undated references .83 Glossary .8CONSTRUCTION4 General .125 Materials 136 Base .157 Pedestal 158 Housing

34、 169 Vapor Barrier 1710 AirGap 2011 Pumping Units 2112 Pressure Relief .2113 Springs 2214 Strainer 2215 Visible Discharge Indicator .2316 Valves .2317 Piping and Fittings 2418 Hose and Couplings 2519 Control Application 26ELECTRICAL EQUIPMENT20 General 2621 Motors .2922 Switches .2923 Class I, Group

35、 D, Division 2 Location, Lighting, Electrical, and Electronic Equipment 2924 Wiring Methods .3025 Locking Mechanism .33PERFORMANCE26 General 3327 Endurance Test 3427.1 Mechanical shaft seal .3427.2 Hose .3427.3 Retrieving mechanism 3428 High-Pressure Leakage Test .3529 Hydrostatic Strength Test 3530

36、 10-Day Moist Ammonia-Air Stress Cracking Test .3631 Float Crushing Test .36JUNE 12, 2008 POWER-OPERATED DISPENSING DEVICES FOR PETROLEUM PRODUCTS - UL 87 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM UL32 Marking Adhesion Test 3633 Torque Te

37、st 3734 Rain Test 3735 Temperature Reduction Test .4136 Leakage of Wire Sealing Test 4137 Tests on Sealing Compounds 41MANUFACTURING AND PRODUCTION TESTS38 General 4239 Leakage Test 4240 Running Test .4341 Dielectric Voltage-Withstand Test .43MARKING42 General 4342.1 Details 4342.2 Cautionary markin

38、gs 4442.3 Additional markings .45INSTALLATION INSTRUCTIONS43 General 45APPENDIX AStandards for ComponentsA1OCTOBER 31, 2001POWER-OPERATED DISPENSING DEVICES FOR PETROLEUM PRODUCTS - UL 874UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULOCTOBER

39、 31, 2001 POWER-OPERATED DISPENSING DEVICES FOR PETROLEUM PRODUCTS - UL 87 5No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULThis page intentionally left blank.JUNE 12, 2008POWER-OPERATED DISPENSING DEVICES FOR PETROLEUM PRO

40、DUCTS - UL 876UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULINTRODUCTION1 Scope1.1 These requirements apply to power-operated dispensing devices for petroleum products such asgasoline for use as motor fuel. Requirements for the installation

41、and use of these dispensing devices areincluded in the Automotive and Marine Service Station Code, NFPA 30A, and the National ElectricalCode, NFPA 70.1.2 These requirements apply to wiring methods used to install or interconnect such control equipmentwhen the equipment is located directly on or with

42、in the housing of the dispensing device. Theserequirements do not apply to control equipment that may authorize, monitor, or interrupt operation of apower-operated dispensing device. Such equipment includes panel mounted equipment located adjacentto the dispensing device, remote consoles located ins

43、ide a permanent structure, and auxiliary equipmentphysically attached to the dispensing device or enclosed by the pedestal and housing.1.3 Deleted October 31, 20012 General2.1 Components2.1.1 Except as indicated in 2.1.2, a component of a product covered by this standard shall comply withthe require

44、ments for that component. See Appendix A for a list of standards covering components usedin the products covered by this standard.2.1.2 A component is not required to comply with a specific requirement that:a) Involves a feature or characteristic not required in the application of the component in t

45、heproduct covered by this standard, orb) Is superseded by a requirement in this standard.2.1.3 A component shall be used in accordance with its rating established for the intended conditions ofuse.2.1.4 Specific components are incomplete in construction features or restricted in performancecapabilit

46、ies. Such components are intended for use only under limited conditions, such as certaintemperatures not exceeding specified limits, and shall be used only under those specific conditions.OCTOBER 31, 2001 POWER-OPERATED DISPENSING DEVICES FOR PETROLEUM PRODUCTS - UL 87 7UL COPYRIGHTED MATERIAL NOT A

47、UTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM UL2.2 Units of measurement2.2.1 Values stated without parentheses are the requirement. Values in parentheses are explanatory orapproximate information.2.3 Undated references2.3.1 Any undated reference to a code or standard app

48、earing in the requirements of this standard shallbe interpreted as referring to the latest edition of that code or standard.3 Glossary3.1 For the purpose of this standard the following definitions apply.3.2 AIR GAP A minimum of 1 inch (25.4 mm) free air space provided between the planes of Division1

49、 or Division 2 hazardous locations and an unclassified area of a dispensing device.3.3 BASE That part of the assembly which is intended to be secured to the foundation on which thedevice will be installed.3.4 CLASS I HAZARDOUS LOCATIONS Locations in which flammable gases or vapors are or maybe present in the air in quantities sufficient to produce explosive or ignitable mixtures. For the purposeof these requirements, as applied to dispensing systems of other than the