UL 83-2014 UL Standard for Safety Thermoplastic-Insulated Wires and Cables (Fifteenth Edition)《热塑性绝缘电线和电缆的UL安全标准 (第十五版)》.pdf

《UL 83-2014 UL Standard for Safety Thermoplastic-Insulated Wires and Cables (Fifteenth Edition)《热塑性绝缘电线和电缆的UL安全标准 (第十五版)》.pdf》由会员分享，可在线阅读，更多相关《UL 83-2014 UL Standard for Safety Thermoplastic-Insulated Wires and Cables (Fifteenth Edition)《热塑性绝缘电线和电缆的UL安全标准 (第十五版)》.pdf（90页珍藏版）》请在麦多课文档分享上搜索。

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 83 Thermoplastic-Insulated Wires and CablesUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FO

2、R FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Thermoplastic-Insulated Wires and Cables, UL 83 Fifteenth Edition, Dated March 28, 2014 Summary of Topics: This New Edition of ANSI/UL 83 is being issued to incorporate several substantive changes. The new a

3、nd revised requirements are substantially in accordance with Proposal(s) on this subject dated October 26, 2012, April 19, 2013 and January 3, 2014. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic,

4、mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable

5、for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of suc

6、h damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, dam

7、age, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. The requirements in this Standard are now in effect, except for those paragraphs, sections, tables, gure

8、s, and/or other elements of the Standard having future effective dates as indicated in the preface. The prior text for requirements that have been revised and that have a future effective date are located after the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice. MARCH 28, 2014 UL 83

9、tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL MARCH 28, 2014 UL 83 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Association of Standardization and Cer

10、tication NMX-J-010-ANCE-2014 Fifth Edition CSA Group CSA C22.2 No. 75-14 Tenth Edition Underwriters Laboratories Inc. UL 83 Fifteenth Edition Thermoplastic-Insulated Wires and Cables March 28, 2014 ANSI/UL 83-2014UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT

11、 PERMISSION FROM UL Commitment for Amendments This standard is issued jointly by the Association of Standardization and Certication (ANCE), the Canadian Standards Association (operating as “CSA Group”), and Underwriters Laboratories Inc. (UL). Comments or proposals for revisions on any part of the s

12、tandard may be submitted to ANCE, CSA Group, or UL at anytime. Revisions to this standard will be made only after processing according to the standards development procedures of ANCE, CSA Group, and UL. CSA Group and UL will issue revisions to this standard by means of a new edition or revised or ad

13、ditional pages bearing their date of issue. ANCE will incorporate the same revisions into a new edition of the standard bearing the same date of issue as the CSA Group and UL pages. Copyright 2014 ANCE Rights reserved in favor of ANCE. 978-1-55491-983-3 2014 CSA Group All rights reserved. No part of

14、 this publication may be reproduced in any form whatsoever without the prior permission of the publisher. This Standard is subject to review ve years from the date of publication, and suggestions for its improvement will be referred to the appropriate committee. To submit a proposal for change, plea

15、se send the following information to inquirescsagroup.org and include Proposal for change in the subject line: Standard designation (number); relevant clause, table, and/or gure number; wording of the proposed change; and rationale for the change. To purchase CSA Group Standards and related publicat

16、ions, visit CSA Groups Online Store at shop.csa.ca or call toll-free 1-800-463-6727 or 416-747-4044. Copyright 2014 Underwriters Laboratories Inc. ULs Standards for Safety are copyrighted by UL. Neither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards an

17、d all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. This ANSI/UL Standard for Safety consists of the Fifteenth Edition including revisions through March 28, 2014. The most recent designation of ANSI/UL 83 as an American National Stan

18、dard (ANSI) occurred on March 26, 2014. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, Title Page (front and back), or the Preface. The National Difference Page and IEC Foreword are also excluded from the ANSI approval of IEC-based standards. The Department of Defen

19、se (DoD) has adopted UL 83 on February 27, 1984. The publication of revised pages or a new edition of this Standard will not invalidate the DoD adoption. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal R

20、equest in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. To purchase UL Standards, visit Comm 2000 at http:/m- or call toll-free 1-888-853-3503.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS PREFACE 6 1 Sc

21、ope .8 2 General 8 2.1 Units of measure .8 2.2 Reference publications 9 2.3 Summary of requirements 12 3 Denitions 12 4 Construction .12 4.1 Conductors .12 4.2 Insulation .17 4.3 Nylon jacket 19 4.4 Assemblies that include thermoplastic-insulated single conductors .19 5 Test requirements 19 5.1 Gene

22、ral 19 5.2 Conductor resistance 20 5.3 Tests on aluminum conductors 20 5.4 Short-term insulation resistance at elevated temperature in water .21 5.5 Long-term insulation resistance in water 21 5.6 Long-term insulation resistance in air for 90C rated conductors 22 5.7 Capacitance and relative permitt

23、ivity of wet rated ( W type) wires 22 5.8 Flexibility at room temperature after aging 23 5.9 Heat shock .23 5.10 Cold bend and cold impact 23 5.11 Deformation .24 5.12 Flame and smoke 24 5.13 Weather resistance (optional) 28 5.14 Oil resistance (optional) .28 5.15 Gasoline and oil resistance (option

24、al) .29 5.16 Abrasion resistance (nylon-covered types or insulations other than PVC) .29 5.17 Crush resistance (nylon-covered types or insulations other than PVC) 30 5.18 Impact resistance (nylon-covered types or insulations other than PVC) .30 5.19 Durability of ink printing .30 5.20 Color coating

25、30 5.21 Long-term aging of insulation 31 5.22 A-C spark test .31 5.23 Dielectric voltage-withstand in water 31 5.24 Insulation resistance in water at 15C .32 5.25 Electrical continuity .32 6 Marking .32 6.1 Marking on product 32 6.2 Marking on package .35 6.3 Month and year of manufacture 36 7 Deep-

26、well submersible water pump cable .36 7.1 General 36 7.2 Construction 36 7.3 Marking 38 7.4 Tests 39 MARCH 28, 2014 NMX-J-010-ANCE-2014 CSA C22.2 NO. 75-14 UL 83 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Tables Annex A (informative) W

27、ire Type and Electrical Code Cross-Reference and Summary of Applications Annex B (normative for Mexico) Multiple-Conductor Thermoplastic-Insulated and -Jacketed Cables B1 Scope .70 B1.1 General .70 B1.2 Single conductors 70 B2 Lay of cabled conductors 70 B3 Equipment-grounding conductor 71 B4 Conduc

28、tor identication .71 B4.1 Color of insulated grounding conductor .71 B4.2 Identication of ungrounded (phase) conductor(s) 71 B4.3 Identication of grounded conductor(s) .71 B5 Fillers .71 B6 Jacket separators .71 B7 Jackets 71 B7.1 General .71 B7.2 Jacket thickness .72 B8 Marking .72 B8.1 Marking on

29、product .72 B8.2 Marking on package 72 Annex C (informative) Summary of Requirements Annex D (normative) Chemical Composition of Recognized ACM or AA 8000 Series Aluminum Alloy Conductor Materials Annex E (normative) Copper-Clad Aluminum Conductors E1 General .79 E2 Sizes and stranding .79 E3 Conduc

30、tor resistance .79 E4 Physical properties .79 E5 Marking requirements .79 MARCH 28, 2014 NMX-J-010-ANCE-2014 CSA C22.2 NO. 75-14 UL 83 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Annex F (informative) Metric Sizes Annex G (informative)

31、Evaluation of Materials Having Characteristics Differing from Those in Table 11 Annex H (informative) French and Spanish Translations and Markings H1 General .85 H2 Markings on wire .85 H3 Markings on packaging 85 MARCH 28, 2014 NMX-J-010-ANCE-2014 CSA C22.2 NO. 75-14 UL 83 5UL COPYRIGHTED MATERIAL

32、NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL PREFACE This is the harmonized ANCE, CSA Group, and UL Standard for Thermoplastic-Insulated Wires and Cables. It is the Fifth edition of NMX-J-010-ANCE, the Tenth edition of CAN/CSA-C22.2 No. 75, and the Fifteenth edi

33、tion of UL 83. This edition of NMX-J-010-ANCE supersedes the previous edition published in 2008. This edition of CAN/CSA-C22.2 No. 75 supersedes the previous edition published in 2008. This edition of UL 83 supersedes the previous edition published in 2008. This harmonized standard was prepared by t

34、he Association of Standardization and Certication, (ANCE), CSA Group and Underwriters Laboratories Inc. (UL). The efforts and support of the Technical Harmonization Committee for Electrical Wires and Cables, of the Council on the Harmonization of Electrotechnical Standards of the Nations of the Amer

35、icas (CANENA), are gratefully acknowledged. This standard is considered suitable for use for conformity assessment within the stated scope of the standard. The present Mexican Standard was developed by the CT 20 Conductores from the Comite de Normalizacion de la Asociacion de Normalizacion y Certica

36、cion, A.C., CONANCE, with the collaboration of the SC 20B Conductores para Baja Tensin. This standard was reviewed by the CSA Integrated Committee on Fixed Installation Wires and Cable, under the jurisdiction of the CSA Technical Committee on Wiring Products and the CSA Strategic Steering Committee

37、on Requirements for Electrical Safety, and has been formally approved by the CSA Technical Committee. This standard has been approved by the American National Standards Institute (ANSI) as an American National Standard. Application of Standard Where reference is made to a specic number of samples to

38、 be tested, the specied number is to be considered a minimum quantity. Note: Although the intended primary application of this standard is stated in its scope, it is important to note that it remains the responsibility of the users of the standard to judge its suitability for their particular purpos

39、e. Level of Harmonization This standard uses the IEC format but is not based on, nor is it considered equivalent to, an IEC standard. This standard provides requirements for insulated wires and cables for use in accordance with the electrical installation codes of Canada, Mexico, and the United Stat

40、es. At present there is no IEC standard for wires and cables for use in accordance with these codes. Therefore, this standard does not employ any IEC standard for base requirements. This standard is published as an equivalent standard for ANCE, CSA Group and UL. An equivalent standard is a standard

41、that is substantially the same in technical content, except as follows: Technical national differences are allowed for codes and governmental regulations as well as those recognized as being in accordance with NAFTA Article 905, for example, because of fundamental climatic, geographical, technologic

42、al, or infrastructural factors, scientic justication, or the level of protection that the country considers appropriate. Presentation is word for word except for editorial changes. MARCH 28, 2014 NMX-J-010-ANCE-2014 CSA C22.2 NO. 75-14 UL 83 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPROD

43、UCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Interpretations The interpretation by the standards development organization of an identical or equivalent standard is based on the literal text to determine compliance with the standard in accordance with the procedural rules of the standards develo

44、pment organization. If more than one interpretation of the literal text has been identied, a revision is to be proposed as soon as possible to each of the standards development organizations to more accurately reect the intent. ANCE Effective Date The effective date for ANCE will be announced throug

45、h the Diario Ocial de la Federacin (Official Gazette) and is indicated on the cover page. CSA Group Effective Date The effective date for CSA Group will be announced through a CSA Informs or CSA Group Certication Notice. UL Effective Date As of March 28, 2014 all products Listed or Recognized by UL

46、must comply with the requirements in this standard. A UL effective date is one established by Underwriters Laboratories Inc. and is not part of the ANSI approved standard. MARCH 28, 2014 NMX-J-010-ANCE-2014 CSA C22.2 NO. 75-14 UL 83 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR

47、 DISTRIBUTION WITHOUT PERMISSION FROM UL Thermoplastic-Insulated Wires and Cables 1 Scope 1.1 This Standard species the requirements for 600 V, single-conductor, thermoplastic-insulated wires and cables, for use as follows: a) In Canada, in accordance with CSA C22.1, Canadian Electrical Code (CEC),

48、Part I; b) In Mexico, in accordance with NOM-001-SEDE, Standard for Electrical Installations; and c) In the United States, in accordance with ANSI/NFPA 70, National Electrical Code (NEC). Note: See Annex A for the complete list of wire types covered by this Standard and the specic electrical codes f

49、or which they are intended. 1.2 This Standard also species the requirements for submersible-pump cables, with or without jackets (see Clause 7). No type-letter designations are assigned to these cables. 1.3 In Mexico, the requirements for multiple-conductor thermoplastic-insulated and -jacketed cables rated 600 V are specied in Annex B. In Canada and the United States, requirements for multiple-conductor thermoplastic-insulated and -jacketed