UL 60730-2-12-2014 UL Standard for Safety Automatic Electrical Controls for Household and Similar Use Part 2 Particular Requirements for Electrically Operated Door Locks (Second Ed.pdf

《UL 60730-2-12-2014 UL Standard for Safety Automatic Electrical Controls for Household and Similar Use Part 2 Particular Requirements for Electrically Operated Door Locks (Second Ed.pdf》由会员分享，可在线阅读，更多相关《UL 60730-2-12-2014 UL Standard for Safety Automatic Electrical Controls for Household and Similar Use Part 2 Particular Requirements for Electrically Operated Door Locks (Second Ed.pdf（32页珍藏版）》请在麦多课文档分享上搜索。

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 60730-2-12 Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electrically Operated Door LocksUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER

2、 REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electrically

3、Operated Door Locks, UL 60730-2-12 Second Edition, Dated June 30, 2014 Summary of Topics UL 60730-2-12 is an adoption of the second edition of IEC 60730-2-12. This new edition dated June 30, 2014, was issued to reect the latest approval date as an American National Standard that was proposed March 1

4、4, 2014. For further information regarding Summary of Requirements, please visit https:/ It is also being issued to reect the established effective date for UL 60730-2-12. AS OF OCTOBER 19, 2018, THE FIRST EDITION OF UL 60730-2-12A AND THE TWELFTH EDITION OF UL 873 WILL BE WITHDRAWN AND WILL BE REPL

5、ACED BY THIS STANDARD. The revised requirements are substantially in accordance with Proposal(s) on this subject dated March 14, 2014. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical pho

6、tocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty of any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any specia

7、l, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or any other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In n

8、o event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of the claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or

9、 judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing an electronic Standard on the purchasers computer system. The requirements in this Standard are now in effect, except for those paragraphs, sections, tables, gures, and/or othe

10、r elements of the Standard having future effective dates as indicated in the preface. The prior text for requirements that have been revised and that have a future effective date are located after the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice. The following table lists the futur

11、e effective dates with the corresponding reference. JUNE 30, 2014 UL 60730-2-12 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Future Effective Date Reference October 19, 2018 Second Edition JUNE 30, 2014 UL 60730-2-12 tr2UL COPYRIGHTED

12、MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL June 30, 2014 1 UL 60730-2-12 Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electrically Operated Door Locks Prior to the second edition of UL 6

13、0730-2-12, the requirements for the products covered by this Standard were included in UL 60730-2-12A. First Edition February, 2002 Second Edition June 30, 2014 This ANSI/UL Standard for Safety consists of the Second Edition dated June 30, 2014. The most recent designation of ANSI/UL 60730-2-12 as a

14、n American National Standard (ANSI) occurred on June 30, 2014. ANSI approval for a standard does not include the Cover Page, Transmittal Pages, Title Page, Preface, or effective date information. The National Difference Page and IEC Foreword are also excluded from the ANSI approval of IEC-based stan

15、dards. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at http:/. ULs Standards for Safety are copyrighted by UL. Neither a printe

16、d nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. COPYRIGHT 2014 UNDERWRITERS LABORATORIES INC. ANSI/UL 60730-2-12-2014UL COPYRIGHTED MATERIAL

17、 NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL JUNE 30, 2014 UL 60730-2-12 2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS Preface (UL) 6 NATIONAL DIFFERENCES .7 FOREWORD 8

18、1 Scope and normative references .11 2 Denitions 12 2.2 Denitions of types of control according to purpose 12 2.3 Denitions relating to the function of controls .12 3 General requirements 12 4 General notes on tests .13 4.1 Conditions of test 13 5 Rating 13 6 Classication 13 6.3 According to their p

19、urpose 13 6.4 According to features of automatic action .14 7 Information 14 8 Protection against electric shock .14 9 Provision for protective earthing .14 10 Terminals and terminations 14 11 Constructional requirements 14 12 Moisture and dust resistance .14 13 Electric strength and insulation resi

20、stance .15 14 Heating 15 15 Manufacturing deviation and drift .15 16 Environmental stress 15 17 Endurance .15 17.3 Thermal conditions for the tests 16 17.4 Manual and mechanical conditions for the tests 16 17.7 Overvoltage (or, in some countries overload) test of automatic action at accelerated rate

21、 .16 17.8 Test of automatic action at accelerated rate .17 17.9 Test of automatic action at slow rate 17 17.10 Overvoltage (or, in Canada, China, and the USA, overload) test of manual action at accelerated speed .17 17.11 Test of manual action at slow speed .18 18 Mechanical strength .18 18.101 Lock

22、ing tests 18 19 Threaded parts and connections 19 20 Creepage distances, clearances and distances through solid insulation .19 21 Resistance to heat, re and tracking 19 22 Resistance to corrosion 19 23 Electromagnetic compatibility (EMC) requirements emission 19 24 Components .19 25 Normal operation

23、 .19 26 Electromagnetic compatibility (EMC) requirements immunity .19 27 Abnormal operation .19 28 Guidance on the use of electronic disconnection .20 JUNE 30, 2014 UL 60730-2-12 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Figures Annex

24、es Annex H (normative) Requirements for electronic controls H.11 Constructional requirements 23 H.11.12 Controls using software 23 H.26 Electromagnetic compatibility (EMC) requirements immunity .23 H.26.6 Test of inuence of voltage unbalance 24 H.26.7 Test of the inuence of d.c. in a.c. networks .24

25、 H.26.8 Surge immunity test 24 H.26.9 Electrical fast transient/burst test .25 H.26.10 Ring wave test 25 H.26.12 Radio-frequency electromagnetic eld immunity .25 H.26.15 Evaluation of compliance .26 H.27 Abnormal operation .26 Annex 12.DVE Manufacturing and Production Tests (normative) JUNE 30, 2014

26、 UL 60730-2-12 4UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL JUNE 30, 2014 UL 60730-2-12 5 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL Preface (UL) This UL

27、 Standard, UL 60730-2-12, Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electrically Operated Door Locks, is to be used in conjunction with UL 60730-1. The requirements for electrically operated door locks are contained in this part 2 s

28、tandard and UL 60730-1. Requirements of this Part 2 Standard, where stated, amend the requirements of UL 60730-1. Where a particular subclause of UL 60730-1 is not mentioned in UL 60730-2-12, the UL 60730-1 subclause applies. The text, gures and tables of the IEC Standard for Automatic Electrical Co

29、ntrols for Household and Similar Use; Part 2: Particular Requirements for Electrically Operated Door Locks, 60730-2-12, copyright 2005, are used in this Standard with the consent of the IEC and the American National Standards Institute (ANSI). The IEC copyrighted material has been reproduced with pe

30、rmission from ANSI. ANSI should be contacted regarding the reproduction of any portion of the IEC material. The IEC Foreword and Introduction are not a part of the requirements of this Standard but are included for information purposes only. Copies of IEC Publication 60730-2-12 may be purchased from

31、 ANSI, 25 West 43rd Street, 4th Floor, New York, NY 10036, (212) 642-4900. Note Although the intended primary application of this Standard is stated in its Scope, it is important to note that it remains the responsibility of the users of the Standard to judge its suitability for their particular pur

32、pose. These materials are subject to copyright claims of IEC and UL. No part of this publication may be reproduced in any form, including an electronic retrieval system, without the prior written permission of UL. All requests pertaining to the UL 60730-2-12 standard should be submitted to UL. UL ef

33、fective date The effective date for UL 60730-2-12, second edition, is October 19, 2018. A UL effective date is one established by Underwriters Laboratories Inc. and is not part of the ANSI approved standard. JUNE 30, 2014 UL 60730-2-12 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION

34、 OR DISTRIBUTION WITHOUT PERMISSION FROM UL NATIONAL DIFFERENCES GENERAL National Differences from the text of International Electrotechnical Commission (IEC) Publication 60730-2-12, Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electrically Operate

35、d Door Locks, copyright 2005, are indicated by notations (differences) and are presented in bold text. There are ve types of National Differences as noted below. The difference type is noted on the rst line of the National Difference in the standard. The standard may not include all types of these N

36、ational Differences. DR These are National Differences based on the national regulatory requirements. D1 These are National Differences which are based on basic safety principles and requirements, elimination of which would compromise safety for consumers and users of products. D2 These are national

37、 differences from IEC requirements based on existing safety practices. These requirements reect national safety practices, where empirical substantiation (for the IEC or national requirement) is not available or the text has not been included in the IEC standard. DC These are National Differences ba

38、sed on the component standards and will not be deleted until a particular component standard is harmonized with the IEC component standard. DE These are National Differences based on editorial comments or corrections. Each national difference contains a description of what the national difference en

39、tails. Typically one of the following words is used to explain how the text of the national difference is to be applied to the base IEC text: Addition / Add - An addition entails adding a complete new numbered clause, subclause, table, gure, or annex. Addition is not meant to include adding select w

40、ords to the base IEC text. Modication / Modify - A modication is an altering of the existing base IEC text such as the addition, replacement or deletion of certain words or the replacement of an entire clause, subclause, table, gure, or annex of the base IEC text. Deletion / Delete - A deletion enta

41、ils complete deletion of an entire numbered clause, subclause, table, gure, or annex without any replacement text. JUNE 30, 2014 UL 60730-2-12 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL INTERNATIONAL ELECTROTECHNICAL COMMISSION AUTOMAT

42、IC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE Part 2-12: Particular requirements for electrically operated door locks FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC Nation

43、al Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic elds. To this end and in addition to other activities, IEC publishes International Standards, Technical Specications, Technical Reports, Publicly Av

44、ailable Specications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and nongovernmental org

45、anizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical

46、 matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC Na

47、tional Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity

48、, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC p

49、rovides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or othe