UL 1298-2006 UL Standard for Safety Roof Trusses for Manufactured Homes《活动住宅用屋顶桁架》.pdf

《UL 1298-2006 UL Standard for Safety Roof Trusses for Manufactured Homes《活动住宅用屋顶桁架》.pdf》由会员分享，可在线阅读，更多相关《UL 1298-2006 UL Standard for Safety Roof Trusses for Manufactured Homes《活动住宅用屋顶桁架》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUL 1298ISBN 0-7629-1251-0Roof Trusses for ManufacturedHomesUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUT

2、HORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUnderwriters Laboratories Inc. (UL)333 Pfingsten RoadNorthbrook, IL 60062-2096UL Standard for Safety for Roof Trusses for Manufactured Homes, UL 1298Fifth Edition, Dated December 21, 2006Summary of TopicsThis new edition of UL

3、 1298 is being issued through ULs electronic publishing system toensure format uniformity between the PDF and HTML versions of the document. Whilenumbering and figure placement, where appropriate, may have been updated, no substantivechanges have been incorporated in the document.The UL Foreword is

4、no longer located within the UL Standard. For information concerning the use andapplication of the requirements contained in this Standard, the current version of the UL Foreword islocated on ULStandardsInfoNet at: http:/ master for this Standard at ULs Northbrook Office is the official document ins

5、ofar as it relates to aUL service and the compliance of a product with respect to the requirements for that product and service,or if there are questions regarding the accuracy of this Standard.ULs Standards for Safety are copyrighted by UL. Neither a printed copy of a Standard, nor the distribution

6、diskette for a Standard-on-Diskette and the file for the Standard on the distribution diskette should bealtered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding thoseStandards shall remain the sole and exclusive property of UL.All rights reserved. No part of this

7、 publication may be reproduced, stored in a retrieval system, ortransmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwisewithout prior permission of UL.Revisions of UL Standards for Safety are issued from time to time. A UL Standard for Safety is currentonly

8、if it incorporates the most recently adopted revisions.UL provides this Standard as is without warranty of any kind, either expressed or implied, including butnot limited to, the implied warranties of merchantability or fitness for any purpose.In no event will UL be liable for any special, incidenta

9、l, consequential, indirect or similar damages,including loss of profits, lost savings, loss of data, or any other damages arising out of the use of or theinability to use this Standard, even if UL or an authorized UL representative has been advised of thepossibility of such damage. In no event shall

10、 ULs liability for any damage ever exceed the price paid forthis Standard, regardless of the form of the claim.UL will attempt to answer support requests concerning electronic versions of its Standards. However, thissupport service is offered on a reasonable efforts basis only, and UL may not be abl

11、e to resolve everysupport request. UL supports the electronic versions of its Standards only if they are used under theconditions and operating systems for which it is intended. ULs support policies may change fromtime-to-time without notification.UL reserves the right to change the format, presenta

12、tion, file types and formats, delivery methods andformats, and the like of both its printed and electronic Standards without prior notice.DECEMBER 21, 2006 UL 1298 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULPurchasers of the electronic

13、 versions of ULs Standards for Safety agree to defend, indemnify, and holdUL harmless from and against any loss, expense, liability, damage, claim, or judgement (includingreasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing anelectronic Standard on t

14、he purchasers computer system.If a single-user version electronic Standard was purchased, one copy of this Standard may be stored onthe hard disk of a single personal computer, or on a single LAN file-server or the permanent storagedevice of a multiple-user computer in such a manner that this Standa

15、rd may only be accessed by one userat a time and for which there is no possibility of multiple concurrent access.If a multiple-user version electronic Standard was purchased, one copy of the Standard may be stored ona single LAN file-server, or on the permanent storage device of a multiple-user comp

16、uter, or on an Intranetserver. The number of concurrent users shall not exceed the number of users authorized.Electronic Standards are intended for on-line use, such as for viewing the requirements of a Standard,conducting a word search, and the like. Only one copy of the Standard may be printed fro

17、m eachsingle-user version of an electronic Standard. Only one copy of the Standard may be printed for eachauthorized user of a multiple-user version of an electronic Standard. Because of differences in thecomputer/software/printer setup used by UL and those of electronic Standards purchasers, the pr

18、intedcopy obtained by a purchaser may not look exactly like the on-line screen view or the printed Standard.An employee of an organization purchasing a UL Standard can make a copy of the page or pages beingviewed for their own fair and/or practical internal use.The requirements in this Standard are

19、now in effect, except for those paragraphs, sections, tables, figures,and/or other elements of the Standard having future effective dates as indicated in the note following theaffected item. The prior text for requirements that have been revised and that have a future effective dateare located after

20、 the Standard, and are preceded by a SUPERSEDED REQUIREMENTS notice.New product submittals made prior to a specified future effective date will be judged under all of therequirements in this Standard including those requirements with a specified future effective date, unlessthe applicant specificall

21、y requests that the product be judged under the current requirements. However, ifthe applicant elects this option, it should be noted that compliance with all the requirements in thisStandard will be required as a condition of continued Listing and Follow-Up Services after the effectivedate, and und

22、erstanding of this should be signified in writing.Copyright 2006 Underwriters Laboratories Inc.This Standard consists of pages dated as shown in the following checklist:Page Date1-6 December 21, 2006DECEMBER 21, 2006 UL 1298tr2UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIB

23、UTION WITHOUT PERMISSION FROM ULDECEMBER 21, 20061UL 1298Standard for Roof Trusses for Manufactured HomesThe First and Second editions were titled Roof Trusses for Mobile Homes.First Edition June, 1975Second Edition April, 1979Third Edition March, 1990Fourth Edition March, 1995Fifth EditionDecember

24、21, 2006An effective date included as a note immediately following certain requirementsis one established by Underwriters Laboratories Inc.Revisions of this Standard will be made by issuing revised or additional pagesbearing their date of issue. A UL Standard is current only if it incorporates themo

25、st recently adopted revisions, all of which are itemized on the transmittal noticethat accompanies the latest set of revised requirements. Comments or proposalsfor revisions on any part of the Standard may be submitted to UL at any time.Proposals should be submitted via a Proposal Request in ULs On-

26、LineCollaborative Standards Development System (CSDS) at http:/.ISBN 0-7629-1251-0COPYRIGHT 2006 UNDERWRITERS LABORATORIES INC.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULDECEMBER 21, 2006ROOF TRUSSES FOR MANUFACTURED HOMES - UL 12982No Te

27、xt on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULCONTENTSINTRODUCTION1 Scope .42 General 43 Glossary .5PERFORMANCE4 General 5MARKING5 General 5DECEMBER 21, 2006 ROOF TRUSSES FOR MANUFACTURED HOMES - UL 1298 3UL COPYRIGHTED MATERI

28、AL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULINTRODUCTION1 Scope1.1 These requirements cover roof trusses whose structural properties cannot be determined by standardengineering calculations. The trusses are intended for installation in manufactured homes.1.2 A

29、 product that contains features, characteristics, components, materials, or systems new or differentfrom those covered by the requirements in this standard, and that involves a risk of fire, electric shock, orinjury to persons shall be evaluated using the appropriate additional component and end-pro

30、ductrequirements as determined necessary to maintain the acceptable level of safety as originally anticipatedby the intent of this standard. A product whose features, characteristics, components, materials, orsystems conflict with specific requirements or provisions of this standard cannot be judged

31、 to comply withthis standard. Where considered appropriate, revision of requirements shall be proposed and adopted inconformance with the methods employed for development, revision, and implementation of this standard.2 General2.1 Except as indicated in 2.2, a component of a product covered by this

32、standard shall comply with therequirements for that component.2.2 A component need not comply with a specific requirement that:a) Involves a feature or characteristic not needed in the application of the component in theproduct covered by this standard, orb) Is superseded by a requirement in this st

33、andard.2.3 A component shall be used in accordance with its recognized rating established for the intendedconditions of use.2.4 Specific components are recognized as being incomplete in construction features or restricted inperformance capabilities. Such components are intended for use only under li

34、mited conditions, such ascertain temperatures not exceeding specified limits and shall be used only under those specific conditionsfor which they have been recognized.DECEMBER 21, 2006ROOF TRUSSES FOR MANUFACTURED HOMES - UL 12984UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDIST

35、RIBUTION WITHOUT PERMISSION FROM UL3 Glossary3.1 For the purpose of this Standard, the following definitions apply.3.2 BEARING SURFACE That area of the truss that rests on the bearing walls or other acceptablesupports.3.3 CLEAR SPAN The unsupported distance between the truss bearing surfaces.3.4 DEA

36、D LOAD The weight of all permanent construction and fixed service equipment, including theweight of the truss.3.5 LIVE LOAD The weight superimposed by the use and occupancy of the manufactured home,including wind and snow load.PERFORMANCE4 General4.1 The performance of a truss or rafter shall be det

37、ermined in accordance with Section 280.402 of theDepartment of Housing and Urban Development Manufactured Home Construction and Safety Standardsas published in the November 18, 1975 Federal Register, Volume 40, No. 244, page 58764, and anysubsequent amendments thereto.MARKING5 General5.1 Each roof t

38、russ or bundle of trusses produced by a truss manufacturer and intended for shipment toa manufactured home manufacturers plant shall be marked with the truss manufacturers or privatelabelers name or identifying symbol.5.2 Each roof truss or bundle of trusses shall be marked to indicate the maximum d

39、esign dead load, themaximum or actual clear span, the minimum bearing surface or other method of support, the maximumdesign roof live load, and the on-center spacing.5.3 All markings shall be securely fixed by means of adhesives, shellac, staples, or acceptablecombinations thereof.5.4 Roof trusses s

40、ecured in bundles shall have marking information attached so as to be readily visible.5.5 If a manufacturer produces roof trusses at more than one factory, each truss or bundle of trussesshall have a distinctive marking to identify it as the product of a particular factory.DECEMBER 21, 2006 ROOF TRUSSES FOR MANUFACTURED HOMES - UL 1298 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULDECEMBER 21, 2006ROOF TRUSSES FOR MANUFACTURED HOMES - UL 12986No Text on This Page