UL 1285-2008 UL Standard for Safety Pipe and Couplings Polyvinyl Chloride (PVC) and Oriented Polyvinyl Chloride (PVCO) for Underground Fire Service (Fifth Edition)《地下防火设施用聚氯乙烯(PVC).pdf

《UL 1285-2008 UL Standard for Safety Pipe and Couplings Polyvinyl Chloride (PVC) and Oriented Polyvinyl Chloride (PVCO) for Underground Fire Service (Fifth Edition)《地下防火设施用聚氯乙烯(PVC).pdf》由会员分享，可在线阅读，更多相关《UL 1285-2008 UL Standard for Safety Pipe and Couplings Polyvinyl Chloride (PVC) and Oriented Polyvinyl Chloride (PVCO) for Underground Fire Service (Fifth Edition)《地下防火设施用聚氯乙烯(PVC).pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUL 1285Pipe and Couplings, PolyvinylChloride (PVC), and OrientedPolyvinyl Chloride (PVCO)for Underground Fire ServiceUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION

2、 WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUnderwriters Laboratories Inc. (UL)333 Pfingsten RoadNorthbrook, IL 60062-2096UL Standard for Safety for Pipe and Couplings, Polyvinyl Chloride (PVC), and Oriented Poly

3、vinyl Chloride(PVCO) for Underground Fire Service, UL 1285Fifth Edition, Dated July 23, 2008SUMMARY OF TOPICS:This new edition of UL 1285 contains Revisions Based on Changes to Pressure Designations inAWWA C900 and Other General RevisionsThe following table lists the future effective dates with the

4、corresponding item.Future Effective Dates ReferencesJanuary 23, 2011 Paragraphs 1.2, 1.3, 6.5, 8.2, 25.1, 26.1, 27.1; andSections 13 and 14.The new and revised requirements are substantially in accordance with ULs Proposal(s) on this subjectdated November 1, 2007.The UL Foreword is no longer located

5、 within the UL Standard. For information concerning the use andapplication of the requirements contained in this Standard, the current version of the UL Foreword islocated on ULStandardsInfoNet at: http:/ master for this Standard at ULs Northbrook Office is the official document insofar as it relate

6、s to aUL service and the compliance of a product with respect to the requirements for that product and service,or if there are questions regarding the accuracy of this Standard.ULs Standards for Safety are copyrighted by UL. Neither a printed copy of a Standard, nor the distributiondiskette for a St

7、andard-on-Diskette and the file for the Standard on the distribution diskette should bealtered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding thoseStandards shall remain the sole and exclusive property of UL.All rights reserved. No part of this publication may

8、be reproduced, stored in a retrieval system, ortransmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwisewithout prior permission of UL.Revisions of UL Standards for Safety are issued from time to time. A UL Standard for Safety is currentonly if it incorporate

9、s the most recently adopted revisions.UL provides this Standard as is without warranty of any kind, either expressed or implied, including butnot limited to, the implied warranties of merchantability or fitness for any purpose.In no event will UL be liable for any special, incidental, consequential,

10、 indirect or similar damages,including loss of profits, lost savings, loss of data, or any other damages arising out of the use of or theinability to use this Standard, even if UL or an authorized UL representative has been advised of thepossibility of such damage. In no event shall ULs liability fo

11、r any damage ever exceed the price paid forthis Standard, regardless of the form of the claim.JULY 23, 2008 UL 1285 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULUL will attempt to answer support requests concerning electronic versions of

12、 its Standards. However, thissupport service is offered on a reasonable efforts basis only, and UL may not be able to resolve everysupport request. UL supports the electronic versions of its Standards only if they are used under theconditions and operating systems for which it is intended. ULs suppo

13、rt policies may change fromtime-to-time without notification.UL reserves the right to change the format, presentation, file types and formats, delivery methods andformats, and the like of both its printed and electronic Standards without prior notice.Purchasers of the electronic versions of ULs Stan

14、dards for Safety agree to defend, indemnify, and holdUL harmless from and against any loss, expense, liability, damage, claim, or judgement (includingreasonable attorneys fees) resulting from any error or deviation introduced while purchaser is storing anelectronic Standard on the purchasers compute

15、r system.If a single-user version electronic Standard was purchased, one copy of this Standard may be stored onthe hard disk of a single personal computer, or on a single LAN file-server or the permanent storagedevice of a multiple-user computer in such a manner that this Standard may only be access

16、ed by one userat a time and for which there is no possibility of multiple concurrent access.If a multiple-user version electronic Standard was purchased, one copy of the Standard may be stored ona single LAN file-server, or on the permanent storage device of a multiple-user computer, or on an Intran

17、etserver. The number of concurrent users shall not exceed the number of users authorized.Electronic Standards are intended for on-line use, such as for viewing the requirements of a Standard,conducting a word search, and the like. Only one copy of the Standard may be printed from eachsingle-user ver

18、sion of an electronic Standard. Only one copy of the Standard may be printed for eachauthorized user of a multiple-user version of an electronic Standard. Because of differences in thecomputer/software/printer setup used by UL and those of electronic Standards purchasers, the printedcopy obtained by

19、 a purchaser may not look exactly like the on-line screen view or the printed Standard.An employee of an organization purchasing a UL Standard can make a copy of the page or pages beingviewed for their own fair and/or practical internal use.The requirements in this Standard are now in effect, except

20、 for those paragraphs, sections, tables, figures,and/or other elements of the Standard having future effective dates as indicated in the note following theaffected item. The prior text for requirements that have been revised and that have a future effective dateare located after the Standard, and ar

21、e preceded by a SUPERSEDED REQUIREMENTS notice.New product submittals made prior to a specified future effective date will be judged under all of therequirements in this Standard including those requirements with a specified future effective date, unlessthe applicant specifically requests that the p

22、roduct be judged under the current requirements. However, ifthe applicant elects this option, it should be noted that compliance with all the requirements in thisStandard will be required as a condition of continued Listing and Follow-Up Services after the effectivedate, and understanding of this sh

23、ould be signified in writing.Copyright 2008 Underwriters Laboratories Inc.This Standard consists of pages dated as shown in the following checklist:Page Date1-14 .July 23, 2008SR1-SR4 July 23, 2008JULY 23, 2008 UL 1285tr2UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION

24、WITHOUT PERMISSION FROM ULJULY 23, 20081UL 1285Standard for Pipe and Couplings, Polyvinyl Chloride (PVC), and OrientedPolyvinyl Chloride (PVCO) for Underground Fire ServiceFirst Edition January, 1982Second Edition March, 1991Third Edition April, 1995Fourth Edition April, 2001Fifth EditionJuly 23, 20

25、08Comments or proposals for revisions on any part of the Standard may besubmitted to UL at any time. Proposals should be submitted via a ProposalRequest in ULs On-Line Collaborative Standards Development System (CSDS)at http:/.ULs Standards for Safety are copyrighted by UL. Neither a printed nor ele

26、ctroniccopy of a Standard should be altered in any way. All of ULs Standards and allcopyrights, ownerships, and rights regarding those Standards shall remain thesole and exclusive property of UL.COPYRIGHT 2008 UNDERWRITERS LABORATORIES INC.UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCT

27、ION ORDISTRIBUTION WITHOUT PERMISSION FROM ULJULY 23, 2008UL 12852No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULCONTENTSINTRODUCTION1 Scope .42 Units of Measurement .43 Components 54 Undated References 55 Glossary .5CONST

28、RUCTION6 Materials .67 Pipe Joints .68 Wall Thickness .79 Imperfections .710 Sealing Gaskets .7PERFORMANCE11 General .712 Elastomeric Parts 813 Short-Term Hydrostatic-Pressure Test 814 Leakage Test for Joints .915 Assembly Test .1016 Flattening Test .1017 Impact Resistance Test 1018 Material Tensile

29、-Strength Test 1019 Long-Term Hydrostatic-Pressure Test .1120 Extrusion Quality Test .1121 Pipe Intended for Potable Water Supply .11MANUFACTURING AND PRODUCTION TESTS22 General 1123 Production-Line Hydrostatic-Pressure Test .12MARKING24 General 1325 Pipe .1326 Couplings 1327 Rubber Gaskets 14JULY 2

30、3, 2008 UL 1285 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM ULINTRODUCTION1 Scope1.1 These requirements cover polyvinyl chloride (PVC) and oriented polyvinyl chloride (PVCO) pressurepipe, couplings, and gaskets for use in underground fire s

31、ervice systems and connections to suchsystems. The pipe is either the distribution or transmission type.1.2 Distribution pipe covered by these requirements shall be designated as Pressure Class 165, 235, and305 for working pressures of 165, 235, and 305 psig (1.14, 1.62, and 2.10 MPa), respectively,

32、 and havea nominal inside diameter in the range of 4 to 12 inches.1.2 effective January 23, 20111.3 Transmission pipe covered by these requirements shall be designated as Pressure Class 100, 125,160, 165, 200, 235, and 305 for working pressures of 100, 125, 160, 165, 200, 235, and 305 psig (0.69,0.8

33、6, 1.10, 1.14, 1.38, 1.62, and 2.10 MPa), respectively, and have a nominal inside diameter in the rangeof 14 to 48 inches.1.3 effective January 23, 20111.4 Requirements for the installation and use of PVC pressure pipe and couplings are specified in theStandard for the Installation of Private Fire S

34、ervice Mains and their Appurtenances, NFPA 24 or theStandard for the Installation of Sprinkler Systems, NFPA 13.1.5 A product that contains features, characteristics, components, materials, or systems new or differentfrom those covered by the requirements in this standard, and that involves a risk o

35、f fire or of electric shockor injury to persons shall be evaluated using appropriate additional component and end-productrequirements to maintain the level of safety as originally anticipated by the intent of this standard. Aproduct whose features, characteristics, components, materials, or systems

36、conflict with specificrequirements or provisions of this standard does not comply with this standard. Revision of requirementsshall be proposed and adopted in conformance with the methods employed for development, revision, andimplementation of this standard.2 Units of Measurement2.1 Values stated w

37、ithout parentheses are the requirement. Values in parentheses are explanatory orapproximate information.JULY 23, 2008UL 12854UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM UL3 Components3.1 Except as indicated in 3.2, a component of a product c

38、overed by this standard shall comply with therequirements for that component.3.2 A component is not required to comply with a specific requirement that:a) Involves a feature or characteristic not required in the application of the component in theproduct covered by this standard, orb) Is superseded

39、by a requirement in this standard.3.3 A component shall be used in accordance with its rating established for the intended conditions ofuse.3.4 Specific components are incomplete in construction features or restricted in performance capabilities.Such components are intended for use only under limite

40、d conditions, such as certain temperatures notexceeding specified limits, and shall be used only under those specific conditions.4 Undated References4.1 Any undated reference to a code or standard appearing in the requirements of this standard shall beinterpreted as referring to the latest edition o

41、f that code or standard.5 Glossary5.1 For the purposes of this Standard, the following definitions apply.5.2 GASKET SEATING AREA The section of pipe or coupling that is, or has the potential to be, incontact with the sealing surfaces of the gasket in intended assemblies.5.3 PIPE SIZE The nominal out

42、side diameter of pipe that is compatible with cast iron pipe or steelpipe (IPS) of the same nominal size.5.4 WORKING PRESSURE The maximum anticipated sustained pressure applied to the pipeexclusive of pressure surges.JULY 23, 2008 UL 1285 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCT

43、ION ORDISTRIBUTION WITHOUT PERMISSION FROM ULCONSTRUCTION6 Materials6.1 PVC pipe and couplings shall:a) Be made from Cell Class 12454 virgin compounds, as defined in the Standard Specificationfor Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly (Vinyl Chloride) (CPVC)Compounds, ANSI/

44、ASTM D1784 except as allowed by 6.3; andb) Have an established hydrostatic-design-basis (HDB) rating of 4000 psig (27.6 MPa) for waterat 73.4F (23.0C).6.2 PVCO pipe shall:a) Be made from Cell Class 12454 virgin compounds, as defined in the Standard Specificationfor Rigid Poly (Vinyl Chloride) (PVC)

45、Compounds and Chlorinated Poly (Vinyl Chloride) (CPVC)Compounds, ANSI/ASTM D1784 except as allowed by 6.3; andb) After expansion, have an established hydrostatic-design-basis (HDB) rating of 7100 psig(49.0 MPa) for water at 73.4F (23.0C).6.3 Noncontaminated PVC and PVCO pipe from the manufacturers p

46、roduction that is reground, orpelletized, and dry blended by the manufacturer with the same grade and Cell Class of PVC virginmaterial, is not prohibited from being used provided that the blended material is of the same Cell Class ofPVC pipe material and the finished product complies with the requir

47、ements of this standard.6.4 The outside diameter of the pipe shall be compatible with the (OD) dimensions of cast-iron pipe.6.5 The outside diameter of pipe shall be permitted to be compatible with the (OD) dimensions of steelpipe when fabricated in accordance with the dimension requirements in AWWA

48、 C905.6.5 effective January 23, 20117 Pipe Joints7.1 If a coupling is used to join the pipe ends, the coupling with sealing ring gaskets shall be furnishedwith each length of pipe. Each coupling shall be of the same composition, trade size, and Pressure Classas the pipe.7.2 If a bell-and-spigot join

49、t is used, a sealing gasket shall be furnished with each length of pipe.JULY 23, 2008UL 12856UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION ORDISTRIBUTION WITHOUT PERMISSION FROM UL8 Wall Thickness8.1 For PVC pipe, the minimum wall thickness for each size and Pressure Class shall be as specified inthe Standard for Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings, 4 In. Through 12 In. (100mm Through 300 mm), for Water Transmission and Distribution, ANSI/A