UL 1023-2017 UL Standard for Safety Household Burglar-Alarm System Units (Seventh Edition).pdf

《UL 1023-2017 UL Standard for Safety Household Burglar-Alarm System Units (Seventh Edition).pdf》由会员分享，可在线阅读，更多相关《UL 1023-2017 UL Standard for Safety Household Burglar-Alarm System Units (Seventh Edition).pdf（109页珍藏版）》请在麦多课文档分享上搜索。

1、UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL 1023 Household Burglar-Alarm System Units STANDARD FOR SAFETYUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM ULUL COPYRIGHTED MATERIAL

2、 NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL UL Standard for Safety for Household Burglar-Alarm System Units, UL 1023 Seventh Edition, Dated September 1, 2017 Summary of Topics This new edition of the Standard for Safety for Household Burglar-Alarm System Units

3、, ANSI/UL 1023, includes the following changes in requirements: 1. Web or Internet Downloadable Digital Installation Instructions for Internet Required Products 2. Cord-Connected Products The revised requirements are substantially in accordance with Proposal(s) on this subject dated March 17, 2017 a

4、nd June 30, 2017. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form by any means, electronic, mechanical photocopying, recording, or otherwise without prior permission of UL. UL provides this Standard as is without warranty o

5、f any kind, either expressed or implied, including but not limited to, the implied warranties of merchantability or tness for any purpose. In no event will UL be liable for any special, incidental, consequential, indirect or similar damages, including loss of prots, lost savings, loss of data, or an

6、y other damages arising out of the use of or the inability to use this Standard, even if UL or an authorized UL representative has been advised of the possibility of such damage. In no event shall ULs liability for any damage ever exceed the price paid for this Standard, regardless of the form of th

7、e claim. Users of the electronic versions of ULs Standards for Safety agree to defend, indemnify, and hold UL harmless from and against any loss, expense, liability, damage, claim, or judgment (including reasonable attorneys fees) resulting from any error or deviation introduced while purchaser is s

8、toring an electronic Standard on the purchasers computer system. SEPTEMBER 1, 2017 UL 1023 tr1UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL SEPTEMBER 1, 2017 UL 1023 tr2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHE

9、R REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL SEPTEMBER 1, 2017 1 UL 1023 Standard for Household Burglar-Alarm System Units First Edition March, 1972 Second Edition August, 1978 Third Edition October, 1978 Fourth Edition September, 1985 Fifth Edition September, 1991 Sixth Edition Novembe

10、r, 1996 Seventh Edition September 1, 2017 This ANSI/UL Standard for Safety consists of the Seventh edition. The most recent designation of ANSI/UL 1023 as an American National Standard (ANSI) occurred on September 1, 2017. ANSI approval for a standard does not include the Cover Page, Transmittal Pag

11、es, and Title Page. Comments or proposals for revisions on any part of the Standard may be submitted to UL at any time. Proposals should be submitted via a Proposal Request in ULs On-Line Collaborative Standards Development System (CSDS) at https:/. ULs Standards for Safety are copyrighted by UL. Ne

12、ither a printed nor electronic copy of a Standard should be altered in any way. All of ULs Standards and all copyrights, ownerships, and rights regarding those Standards shall remain the sole and exclusive property of UL. COPYRIGHT 2017 UNDERWRITERS LABORATORIES INC. ANSI/UL 1023-2017UL COPYRIGHTED

13、MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL SEPTEMBER 1, 2017 HOUSEHOLD BURGLAR-ALARM SYSTEM UNITS - UL 1023 2 No Text on This PageUL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL CONTENTS INTRO

14、DUCTION 1 Scope .7 2 Components8 3 Units of Measurement .8 4 Undated References 9 5 Terminology 9 6 Glossary .9 7 Instructions and Drawings.10 CONSTRUCTION ASSEMBLY 8 General.12 9 Test Features .12 10 Enclosures .12 10.1 General .12 10.2 Openings17 10.3 Cast metal.22 10.4 Sheet metal .23 10.5 Nonmet

15、allic 23 10.6 Doors, covers, and guards 24 10.7 Screens and expanded metal 24 11 Electric Shock 25 12 Protection Against Corrosion .25 FIELD-WIRING CONNECTIONS 13 General26 14 Cord-Connected Products .26 15 Permanently-Connected Products.27 16 Special Terminal Assemblies .29 17 Polarity Identication

16、 30 INTERNAL WIRING AND ASSEMBLY 18 General30 19 Separation of Circuits .31 20 Bonding for Grounding 32 21 Equipment Grounding Connection 33 ELECTRICAL COMPONENTS 22 General34 22.1 Mounting of parts 34 22.2 Current-carrying parts.34 22.3 Capacitors.34 22.4 Overcurrent protection 34 22.5 Semiconducto

17、rs 34 SEPTEMBER 1, 2017 HOUSEHOLD BURGLAR-ALARM SYSTEM UNITS - UL 1023 3UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 22.6 Switches 35 22.7 Secondary power supply 35 23 Insulating Materials .35 23.1 General .35 23.2 Bushings 36 24 Batterie

18、s .37 25 Lampholders and Lamps 38 26 Transformers, Coils, and Relays 38 SPACINGS 27 General38 PERFORMANCE GENERAL 28 Common Requirements .40 28.1 Test units and data .40 28.2 Test samples and miscellaneous data 41 29 Operation Test .41 30 Electrical Supervision Test .43 31 Input Test44 31.1 Input ci

19、rcuit 44 31.2 Output circuit 44 32 Power-Limited Circuits.45 32.1 General .45 32.2 Maximum voltage 47 32.3 Maximum current.47 32.4 VA max (not inherently limited circuits only) .48 33 Undervoltage Operation Test .48 34 Overvoltage Operation Test 48 35 Variable Ambient Temperature Test.49 36 Humidity

20、 Test 49 37 Leakage Current Test for Cord-Connected Products 49 38 Electric Shock Current Test 53 39 Overload Test 56 39.1 General .56 39.2 Separately energized circuits 57 40 Endurance Test 57 40.1 General .57 40.2 Separately energized circuits 57 41 Jarring Test 57 42 Vibration Test 58 43 Dust Tes

21、t 59 44 Component Malfunction Test .59 45 Rain Test 59 46 Dielectric Voltage-Withstand Test .63 47 Static Discharge Test .64 48 Temperature Test.64 49 Charging Current Test.68 49.1 General .68 49.2 Discharged battery .68 SEPTEMBER 1, 2017 HOUSEHOLD BURGLAR-ALARM SYSTEM UNITS - UL 1023 4UL COPYRIGHTE

22、D MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 49.3 Charged battery 68 49.4 Discharged battery second trial.69 50 Abnormal Operation Test 69 51 Electrical Transient Tests 69 51.1 General .69 51.2 Supply line transients .70 51.3 Internally induced transi

23、ents .70 51.4 Input/output circuit transients 70 52 AC Induction Test.72 53 Tests on Polymeric Materials.72 54 Audibility Test 73 55 Battery Replacement Test .73 56 Drop Test 74 57 Strain Relief Test .74 57.1 General .74 57.2 Field-wiring leads.74 58 Ignition Through Bottom-Panel Openings Tests.75 5

24、8.1 General .75 58.2 Hot aming oil .75 59 Mechanical Strength Tests for Enclosures .76 60 Special Terminal Assemblies Tests .76 60.1 General .76 60.2 Disconnection and reconnection .77 60.3 Mechanical secureness .77 60.4 Flexible test .77 60.5 Millivolt drop test .77 60.6 Temperature test .78 SHORT-

25、RANGE RADIO FREQUENCY DEVICES 61 General78 62 Reference Level Determination .78 62.1 Method 1 78 62.2 Method 2 81 63 Interference Immunity .84 64 Frequency Selectivity85 65 Time to Report Alarm .86 66 Inoperative Transmitter Reporting.86 67 Clash86 68 Error (Falsing) Rate .87 69 Throughput Rate89 70

26、 Maximum Duration of Transmission .90 71 Battery Status Indication .90 72 Transmitter Stability Tests .90 73 Transmitter Accelerated Aging Test .91 74 Installation Instructions and User Manual 91 SHORT-RANGE WIRELESS DEVICES 75 General91 76 Time to Report Alarm .92 77 Inoperative Transmitter Reporti

27、ng.92 78 Clash92 SEPTEMBER 1, 2017 HOUSEHOLD BURGLAR-ALARM SYSTEM UNITS - UL 1023 5UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 79 Error (Falsing) Rate .92 80 Throughput Rate93 81 Maximum Duration of Transmission .94 82 Battery Status Ind

28、ication .94 83 Transmitter Stability Tests .95 84 Transmitter Accelerated Aging Test .95 85 Installation Instructions and User Manual 95 MANUFACTURING AND PRODUCTION TESTS 86 General95 87 Dielectric Voltage-Withstand Tests 96 88 Grounding Continuity Tests for Cord-Connected Products .97 MARKINGS 89

29、Details.97 ACCESSORY EQUIPMENT 90 General 100 91 Construction 100 92 Performance (Installation) Test 101 93 Markings .101 APPENDIX A Standards for ComponentsA1 SEPTEMBER 1, 2017 HOUSEHOLD BURGLAR-ALARM SYSTEM UNITS - UL 1023 6UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIB

30、UTION WITHOUT PERMISSION FROM UL INTRODUCTION 1 Scope 1.1 These requirements cover burglar-alarm system units intended for use in residences to protect a complete multiroom residence, one room of a residence, or one opening or area in a residence. 1.2 Household burglar-alarm system units covered by

31、these requirements consist of one or more unit assemblies of electrical components that are designed to detect the presence, movement, sound, or other activity of an intruder. Provisions are made for the connection of a power supply, remote control, and signal circuits by a prescribed method of wiri

32、ng. These system units usually operate within the limits of Class 2 remote control and signal circuits as dened by Article 725 of the National Electrical Code, NFPA 70. 1.3 These requirements also apply to the use of combination systems, such as a combination re-burglar-alarm system control unit. A

33、combination system is connected in such a manner that fault conditions (shorts, opens, grounds) in the burglar-alarm system circuit wiring, or interconnections between the re- and burglar-alarm system circuits, will not interfere with the supervision of the re alarm system or will not prevent intend

34、ed alarm signal operation. 1.4 A combination household re and burglar alarm system shall also comply with the Standard for Household Fire Warning System Units, UL 985. 1.5 These requirements cover accessories that are external to the control unit and that are dependent upon the control unit function

35、, such as end-of-line devices, annunciators, remote switches, and the like. 1.6 Intrusion detection devices, such as motion detectors or sound detectors, are covered by the Standard for Intrusion-Detection Units, UL 639. 1.7 A household burglar alarm system shall provide supervision of the initiatin

36、g device circuits, so that if there is an open in the circuit or failure of a transmitter devices ability to communicate with its receiver, the open or failure to transmit will be indicated to the alarm system user. 1.8 Only alarm equipment determined acceptable for household burglar alarm service m

37、ay be installed under the requirements contained in the Standard for Installation and Classication of Residential Burglar Alarm Systems, UL 1641. SEPTEMBER 1, 2017 HOUSEHOLD BURGLAR-ALARM SYSTEM UNITS - UL 1023 7UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTHER REPRODUCTION OR DISTRIBUTION WITHOUT

38、PERMISSION FROM UL 2 Components 2.1 Except as indicated in 2.2, a component of a product covered by this standard shall comply with the requirements for that component. See Appendix A for a list of standards covering components used in the products covered by this standard. 2.2 A component is not re

39、quired to comply with a specic requirement that: a) Involves a feature or characteristic not required in the application of the component in the product covered by this standard, or b) Is superseded by a requirement in this standard. 2.3 A component shall be used in accordance with its rating establ

40、ished for the intended conditions of use. 2.4 Specic components are incomplete in construction features or restricted in performance capabilities. Such components are intended for use only under limited conditions, such as certain temperatures not exceeding specied limits, and shall be used only und

41、er those specic conditions. 2.5 If a digital alarm communicator transmitter is used to transmit signals to a remote location and is to be included as a component of the system, it shall comply with the applicable requirements in the Standard for Digital Alarm Communicator System Units, UL 1635. For

42、other transmission methods, the system shall comply with the Standard for Central Station Burglar Alarm Units, UL 1610 (with the applicable exceptions for residential applications). Otherwise the user must be notied that the off-premises transmission method has not been so investigated. Exception: P

43、acket switched data network alarm communicator transmitters intended for use in residential burglar-alarm systems are not required to identify and report a loss of connection/signal within 200 seconds at the central station receiving unit. The transmitter shall contact the receiver with an identiabl

44、e signal at least once every 30 days. 3 Units of Measurement 3.1 Values stated without parentheses are the requirement. Values in parentheses are explanatory or approximate information. SEPTEMBER 1, 2017 HOUSEHOLD BURGLAR-ALARM SYSTEM UNITS - UL 1023 8UL COPYRIGHTED MATERIAL NOT AUTHORIZED FOR FURTH

45、ER REPRODUCTION OR DISTRIBUTION WITHOUT PERMISSION FROM UL 4 Undated References 4.1 Any undated reference to a code or standard appearing in the requirements of this standard shall be interpreted as referring to the latest edition of that code or standard. 5 Terminology 5.1 The term product as used

46、in these requirements refers to all types of household burglar-alarm system units. 5.2 Unless otherwise indicated, all voltage and current values in this standard are rms. 6 Glossary 6.1 For the purpose of this standard, the following denitions apply. 6.2 ALARM SIGNAL An audible signal indicating an

47、 alarm condition requiring immediate action, such as an alarm initiated from an intrusion detector, door switch, oor mat, or the like. 6.3 ANNUNCIATOR An externally-connected electrically operated visual indicating device containing one or more identied targets or indicator lamps in which each targe

48、t or lamp indicates the circuit condition, location, or both. 6.4 CIRCUITS, ELECTRICAL a) Class2Acircuit in which the voltage and power limitations are in accordance with the requirements of Table 32.1 for AC circuits and Table 32.2 for DC circuits. b) Class3Acircuit in which the voltage and power l

49、imitations are in accordance with the requirements of Table 32.1 for AC circuits and Table 32.2 for DC circuits. c) High-Voltage (Class 1) A circuit involving a potential of not more than 600 volts and having circuit characteristics in excess of those of a low-voltage power-limited circuit. d) Low-Voltage A circuit involving a potential of not more than 30 volts AC rms, 42.4 volts DC or AC peak. e) Power-Limited A circuit wherein the power and current are limited as specied in Tables 32.1 and