UFC 3-340-02-2008 STRUCTURES TO RESIST THE EFFECTS OF ACCIDENTAL EXPLOSIONS [Superseded ARMY ARMY TM 5-1300]《防御爆炸事故后果的构筑物[代替 ARMY ARMY TM 5-1300]》.pdf

《UFC 3-340-02-2008 STRUCTURES TO RESIST THE EFFECTS OF ACCIDENTAL EXPLOSIONS [Superseded ARMY ARMY TM 5-1300]《防御爆炸事故后果的构筑物[代替 ARMY ARMY TM 5-1300]》.pdf》由会员分享，可在线阅读，更多相关《UFC 3-340-02-2008 STRUCTURES TO RESIST THE EFFECTS OF ACCIDENTAL EXPLOSIONS [Superseded ARMY ARMY TM 5-1300]《防御爆炸事故后果的构筑物[代替 ARMY ARMY TM 5-1300]》.pdf（6页珍藏版）》请在麦多课文档分享上搜索。

1、DRAFT UFC 334002 22 May 2005 UNIFIED FACILITIES CRITERIA (UFC) STRUCTURES TO RESIST THE EFFECTS OF ACCIDENTAL EXPLOSIONS APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED UFC 3-340-02 5 December 2008Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-D

2、RAFT UFC 334002 22 May 2005 UNIFIED FACILITIES CRITERIA (UFC) STRUCTURES TO RESIST THE EFFECTS OF ACCIDENTAL EXPLOSIONS Any copyrighted material included in this UFC is identified at its point of use. Use of the copyrighted material apart from this UFC must have the permission of the copyright holde

3、r. U.S. ARMY CORPS OF ENGINEERS NAVAL FACILITIES ENGINEERING COMMAND (Preparing Activity) AIR FORCE CIVIL ENGINEER SUPPORT AGENCY Record of Changes (changes are indicated by 1 . /1/) Change No. Date Location This UFC supersedes ARMY TM 5-1300, dated November 1990. UFC 3-340-02 5 December 2008Provide

4、d by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-UFC 3-340-02 5 December 2008 FOREWORD The Unified Facilities Criteria (UFC) system is prescribed by MIL-STD 3007 and provides planning, design, construction, sustainment, restoration, and modernization criteri

5、a, and applies to the Military Departments, the Defense Agencies, and the DoD Field Activities in accordance with USD(AT Army TM 5-1300, Navy NAVFAC P-397, and Air Force AFR 88-22, dated November 1990. The conversion of the November 1990 document into UFC 3-340-02 was accomplished through the develo

6、pment of a concise navigable Adobe Acrobat format version of the November 1990 document with only very minor revisions dated June 2008. Reasons for Document: This document is referenced by DoD 6055.09-STD, “DOD Ammunition and Explosives Safety Standards” and applies to all operations and facilities

7、within an explosives safety quantity-distance (ESQD) arc in which personnel or property are exposed to ammunition and explosives hazards. The document contains design procedures to achieve personnel protection, protect facilities and equipment, and prevent propagation of accidental explosions. Impac

8、t: There are no anticipated cost impacts. However, the following benefits should be realized. Current Department of Defense design and construction criteria will be incorporated into the Unified Facilities Criteria (UFC). The November 1990 document will be available in a more functional format that

9、allows simpler navigation of the document, and will facilitate future update capabilities. UFC 3-340-02 5 December 2008Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-UFC 3-340-02, “Structures to Resist the Effects of Accidental Explosions.” This doc

10、ument is a conversion and update of Army TM5-1300, Navy NAVFAC P-397, and Air Force AFR 88-22, dated November 1990. It has been converted into a current Adobe PDF format for ease of navigation. Three downloadable files are provided. 1. “ufc_3_340_02_pdf.pdf”: This file will allow you to view the com

11、plete UFC as a stand alone PDF document. 2. “ufc_3_340_02_dplot_v1.zip”: When extracted this application will allow the plots contained within the document to be opened with Dplot pre-version 2.1, to enhance their functionality. You must have Dplot installed on your computer to use this capability.

12、If you have a Dplot version 2.1 or later installed, you should download the file “UFC 3-340-02 DPLOT v2.zip” instead of this one. 3. “ufc_3_340_02_dplot_v2.zip”: When extracted this application will allow the plots contained within the document to be opened with Dplot version 2.1 or later, to enhanc

13、e their functionality. You must have Dplot installed on your computer to use this capability. If you have a Dplot pre-version 2.1 installed, you should download the file “ufc_3_340_02_dplot_v1.zip” instead of this one. Downloadable files: (Please read notes below before proceeding) 1. “ufc_3_340_02_

14、pdf.pdf”: For use in a stand alone mode. (1943 pages, 18.5mb)2. “ufc_3_340_02_dplot_v1.zip”: For use with Dplot (pre version 2.1) (17.5mb) 3. “ufc_3_340_02_dplot_v2.zip”: For use with Dplot (v2.1 or later) (19mb)- Notes regarding the zipped files: The UFC has been developed so that the plot files co

15、ntained in the document can be opened in DPlot to enhance their functionality. DPlot is a plotting program developed by HydeSoft Computing LLC () that allows viewing and editing of a variety of data plots. After installing the appropriate zipped file, the source DPlot files can be opened when the pl

16、ot images contained in the PDF version of UFC are clicked. The two zipped files, representing two versions of the document differ only with regard to DPlot file compatibility. If the user has an older version of DPlot (pre-2.1), version 1 of this document, “UFC 3-340-02 DPLOT v1.zip”, should be used

17、 for compatibility. If the user has a current version of DPlot (v2.1 or later), version 2 of this document, “ufc_3_340_02_dplot_v2.zip”, should be used. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- Notes regarding installation: 1. The compressed

18、ZIP file for the document can be uncompressed to any location that the user desires. 2. The “Plots“ folder must remain located adjacent to the PDF document for the hyperlinked images to run correctly. That is, the document and the plots folder should be co-located; the document should never be place

19、d within the plots folder. Extracting the zip file to a specified location on your computer should set up the appropriate file structure. - Notes regarding the Dplot File function: Errors may occur in attempting to open the hyperlinked plot files if the user has both an older and newer version of DP

20、lot installed. This often based on the “file associations“ of the users computer. In such case, version 2 of the document can be employed if the user re-associates the file extensions. To re-associate the DPlot file type (*.grf) with the new version of DPlot, follow these steps: 1. Navigate in windo

21、ws explorer to a DPlot file 2. Right click on the file, and select “open with“ from the drop-down menu 3. Use the “Browse“ button to navigate to the Program directory, selecting the “DPLOT.exe“ program from the DPlot folder. Select “open“ or “OK“. 4. After selecting the program, the computer will re

22、turn to the prior “Open With“ dialogue. MAKE sure to check the box for the option to always open files of this type with the DPlot program that you selected. This procedure will re-associate the chosen version of DPlot to open *.grf files by default. - Notes regarding document: The PDF document feat

23、ures two major navigational systems, either of which may be used to move through the document. First, the navigation pane on the left side allows the user to jump to various locations in the document. Each chapter can be expanded using the “plus“ marker to its left, revealing sub-sections. Second, t

24、he tables of contents, figures, and tables located in the text pages of the document are hyperlinked. Clicking on the text will allow the user to jump immediately to particular sections, images, or tables. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-