TIA-890-A-2007 Test Application Specification (TAS) for High Rate Packet Data Air Interface《高速率信息包数据空中接口的测试应用规范》.pdf

《TIA-890-A-2007 Test Application Specification (TAS) for High Rate Packet Data Air Interface《高速率信息包数据空中接口的测试应用规范》.pdf》由会员分享，可在线阅读，更多相关《TIA-890-A-2007 Test Application Specification (TAS) for High Rate Packet Data Air Interface《高速率信息包数据空中接口的测试应用规范》.pdf（144页珍藏版）》请在麦多课文档分享上搜索。

1、 TIA STANDARD Test Application Specification (TAS) for High Rate Packet Data Air Interface TIA-890-A (Revision of TIA-890) April 2007 TELECOMMUNICATIONS INDUSTRY ASSOCIATION Representing the telecommunications industry in association with the Electronic Industries Alliance Copyright Telecommunicatio

2、ns Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and

3、 purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-membe

4、r of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in

5、accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety prob

6、lems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. 3-0018-RV1, formulated und

7、er the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or prac

8、tice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are

9、claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to

10、discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in t

11、he Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, s

12、pecification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of as

13、surance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of

14、 the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or servic

15、es or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND

16、ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR H

17、EALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from

18、IHS-,-,-TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS,

19、 LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THE

20、SE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA 890-A CONTENTS i FOREWORD. xiii 1 REFERENCES. xv 2 1 Over

21、view .1-1 3 1.1 Scope of This Document1-1 4 1.2 Objectives1-1 5 1.3 Requirements Language 1-1 6 1.4 Protocol Overview 1-1 7 1.5 Basic Protocol Numbers.1-2 8 1.6 Document Organization.1-2 9 1.7 Acronyms 1-4 10 1.8 Notation 1-4 11 2 Forward Test Application Protocol (FTAP) Specification2-1 12 2.1 Over

22、view2-1 13 2.2 Data Encapsulation.2-1 14 2.3 Primitives and Public Data 2-1 15 2.3.1 Commands 2-1 16 2.3.2 Indications 2-2 17 2.3.3 Public Data2-2 18 2.4 Basic Protocol Numbers.2-2 19 2.5 Protocol Data Unit.2-2 20 2.6 Test Statistics2-2 21 2.6.1 Access Terminal Requirements 2-2 22 2.6.2 Access Netwo

23、rk Requirements .2-3 23 2.7 Procedures 2-3 24 2.7.1 Test Parameter Configuration 2-4 25 2.7.1.1 Access Terminal Requirements 2-4 26 2.7.1.1.1 Access Terminal Configuration Initialization.2-4 27 2.7.1.1.2 Access Terminal Configuration for Lost or Closed Connection 2-4 28 2.7.1.2 Access Network Requir

24、ements .2-5 29 2.7.1.2.1 Access Network Test Statistics and Parameters Initialization2-5 30 2.7.2 Access Terminal Statistics Collection and Retrieval2-5 31 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted wi

25、thout license from IHS-,-,-TIA 890-A CONTENTS ii 2.7.2.1 Access Terminal Requirements 2-5 1 2.7.2.1.1 Statistics Initialization .2-6 2 2.7.2.2 Access Network Requirements.2-6 3 2.7.3 FTAP Test Packet Transmission and Reception2-7 4 2.7.3.1 Access Terminal Requirements 2-7 5 2.7.3.2 Access Network Re

26、quirements.2-7 6 2.7.4 FTAP Loop Back Packet Transmission and Reception2-7 7 2.7.4.1 Access Terminal Requirements 2-7 8 2.7.4.2 Access Network Requirements.2-8 9 2.7.5 DRC Channel Transmission 2-9 10 2.7.5.1 Access Terminal Requirements 2-9 11 2.7.6 ACK Channel Transmission.2-10 12 2.7.6.1 Access Te

27、rminal Requirements 2-10 13 2.8 Message Formats 2-10 14 2.8.1 FTAPParameterAssignment .2-10 15 2.8.1.1 DRCValueFixedMode Parameter Record 2-11 16 2.8.1.2 DRCCoverFixedMode Parameter Record 2-11 17 2.8.1.3 ACKChannelBitFixedMode Parameter Record 2-12 18 2.8.1.4 LoopBackMode Parameter Record2-12 19 2.

28、8.2 FTAPParameterComplete.2-13 20 2.8.3 FTAPStatsClearRequest.2-13 21 2.8.4 FTAPStatsClearResponse.2-14 22 2.8.5 FTAPStatsGetRequest2-14 23 2.8.6 FTAPStatsGetResponse .2-15 24 2.8.6.1 IdleASPStats Statistics Record.2-15 25 2.8.6.2 ConnectedSSStats Statistics Record 2-16 26 2.8.6.3 FirstSyncCCPktStat

29、s Statistics Record 2-17 27 2.9 FTAP Packet Formats 2-18 28 2.9.1 FTAP Test Packet.2-18 29 2.9.2 FTAP Loop Back Packet.2-19 30 2.10 Protocol Numeric Constants2-21 31 2.11 Interface to Other Protocols.2-22 32 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot

30、for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA 890-A CONTENTS iii 2.11.1 Commands 2-22 1 2.11.2 Indications.2-22 2 3 Reverse Test Application Protocol (RTAP) Specification 3-1 3 3.1 Overview3-1 4 3.2 Data Encapsulation.3-1 5 3.3 Primitives and Public Data 3-1 6 3.

31、3.1 Commands 3-1 7 3.3.2 Indications 3-1 8 3.3.3 Public Data3-2 9 3.4 Basic Protocol Numbers.3-2 10 3.5 Protocol Data Unit.3-2 11 3.6 Test Statistics3-2 12 3.6.1 Access Network Requirements .3-2 13 3.7 Procedures 3-2 14 3.7.1 Test Parameter Configuration 3-2 15 3.7.1.1 Access Terminal Requirements 3

32、-2 16 3.7.1.1.1 Access Terminal Configuration Initialization.3-3 17 3.7.1.1.2 Access Terminal Configuration for Closed or Lost Connection 3-3 18 3.7.1.1.3 Access Terminal Test Parameter Initialization 3-3 19 3.7.1.2 Access Network Requirements .3-3 20 3.7.1.2.1 Access Network Test Statistics Initial

33、ization.3-4 21 3.7.2 RTAP Packet Transmission and Reception .3-4 22 3.7.2.1 Access Terminal Requirements 3-4 23 3.7.2.1.1 Generation and Transmission 3-4 24 3.7.2.1.2 Rate Selection 3-5 25 3.7.2.2 Access Network Requirements .3-5 26 3.8 Message Formats.3-6 27 3.8.1 RTAPParameterAssignment .3-6 28 3.

34、8.1.1 RTAPTestPktEnable Parameter Record.3-7 29 3.8.1.2 PacketRateMode Parameter Record3-7 30 3.8.2 RTAPParameterComplete .3-8 31 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,

35、-TIA 890-A CONTENTS iv 3.9 RTAP Packet Formats3-9 1 3.9.1 RTAP Test Packet 3-9 2 3.9.2 RTAP Fill Packet3-10 3 3.10 Protocol Numeric Constants3-11 4 3.11 Interface to Other Protocols.3-11 5 3.11.1 Commands3-11 6 3.11.2 Indications 3-11 7 4 Forward Enhanced Test Application Protocol (FETAP) Specificat

36、ion 4-1 8 4.1 Overview .4-1 9 4.2 Data Encapsulation 4-1 10 4.3 Primitives and Public Data4-2 11 4.3.1 Commands4-2 12 4.3.2 Indications 4-2 13 4.3.3 Public Data .4-2 14 4.4 Basic Protocol Numbers 4-2 15 4.5 Protocol Data Unit.4-2 16 4.6 Test Statistics .4-2 17 4.6.1 Access Terminal Requirements4-2 1

37、8 4.6.2 Access Network Requirements.4-3 19 4.7 Procedures4-4 20 4.7.1 Test Parameter Configuration4-4 21 4.7.1.1 Access Terminal Requirements 4-4 22 4.7.1.1.1 Access Terminal Configuration Initialization 4-5 23 4.7.1.1.2 Access Terminal Configuration for Lost or Closed Connection4-5 24 4.7.1.2 Acces

38、s Network Requirements.4-6 25 4.7.1.2.1 Access Network Test Statistics and Parameters Initialization .4-6 26 4.7.2 Access Terminal Statistics Collection and Retrieval .4-6 27 4.7.2.1 Access Terminal Requirements 4-6 28 4.7.2.1.1 Statistics Initialization .4-7 29 4.7.2.2 Access Network Requirements.4

39、-7 30 4.7.3 PL_0_1_2 FETAP Test Packet Transmission and Reception4-8 31 4.7.3.1 Access Terminal Requirements 4-8 32 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA 890-A CON

40、TENTS v 4.7.3.2 Access Network Requirements .4-8 1 4.7.4 PL_0_1 FETAP Loop Back Packet and PL_2 FETAP Loop Back Packet 2 Transmission and Reception .4-8 3 4.7.4.1 Access Terminal Requirements 4-8 4 4.7.4.2 Access Network Requirements .4-9 5 4.7.5 DRC Channel Transmission.4-12 6 4.7.5.1 Access Termin

41、al Requirements 4-12 7 4.7.6 ACK Channel Transmission .4-12 8 4.7.6.1 Access Terminal Requirements 4-12 9 4.8 Message Formats.4-12 10 4.8.1 FETAPParameterAssignment .4-12 11 4.8.1.1 DRCValueFixedMode Parameter Record.4-13 12 4.8.1.2 DRCCoverFixedMode Parameter Record.4-14 13 4.8.1.3 ACKChannelBitFix

42、edMode Parameter Record 4-14 14 4.8.1.4 LoopBackMode Parameter Record4-15 15 4.8.1.5 ACKChannelModulationTypeFixedMode Parameter Record 4-15 16 4.8.2 FETAPParameterComplete .4-16 17 4.8.3 FETAPStatsClearRequest.4-16 18 4.8.4 FETAPStatsClearResponse.4-17 19 4.8.5 FETAPStatsGetRequest4-17 20 4.8.6 FET

43、APStatsGetResponse .4-18 21 4.8.6.1 IdleASPStats Statistics Record .4-19 22 4.8.6.2 ConnectedSSStats Statistics Record 4-19 23 4.8.6.3 FirstSyncCCPktStats Statistics Record.4-20 24 4.9 FETAP Packet Formats 4-21 25 4.9.1 PL_0_1_2 FETAP Test Packet .4-21 26 4.9.2 PL_0_1 FETAP Loop Back Packet.4-22 27

44、4.9.3 PL_2 FETAP Loop Back Packet.4-24 28 4.10 Protocol Numeric Constants 4-26 29 4.11 Interface to Other Protocols .4-27 30 4.11.1 Commands 4-27 31 4.11.2 Indications.4-27 32 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or net

45、working permitted without license from IHS-,-,-TIA 890-A CONTENTS vi 5 Reverse Enhanced Test Application Protocol (RETAP) Specification .5-1 1 5.1 Overview .5-1 2 5.2 Data Encapsulation 5-1 3 5.3 Primitives and Public Data5-2 4 5.3.1 Commands5-2 5 5.3.2 Indications 5-2 6 5.3.3 Public Data .5-2 7 5.4

46、 Basic Protocol Numbers 5-2 8 5.5 Protocol Data Unit.5-2 9 5.6 Test Statistics .5-2 10 5.6.1 Access Terminal Requirements5-2 11 5.6.2 Access Network Requirements.5-3 12 5.7 Procedures5-3 13 5.7.1 Test Parameter Configuration5-4 14 5.7.1.1 Access Terminal Requirements 5-4 15 5.7.1.1.1 Access Terminal

47、 Configuration Initialization 5-5 16 5.7.1.1.2 Access Terminal Configuration for Closed or Lost Connection5-5 17 5.7.1.1.3 Access Terminal Test Parameter Initialization 5-5 18 5.7.1.2 Access Network Requirements.5-6 19 5.7.1.2.1 Access Network Test Statistics Initialization.5-6 20 5.7.2 Access Termi

48、nal Statistics Collection and Retrieval .5-6 21 5.7.2.1 Access Terminal Requirements 5-6 22 5.7.2.1.1 Statistics Initialization .5-7 23 5.7.2.2 Access Network Requirements.5-7 24 5.7.3 PL_0_1 RETAP Packet and PL_2 RETAP Packet Transmission and 25 Reception .5-7 26 5.7.3.1 Access Terminal Requirement

49、s 5-7 27 5.7.3.1.1 Generation and Transmission5-7 28 5.7.3.1.2 Rate Selection5-9 29 5.7.3.1.3 Payload Size Selection5-9 30 5.7.3.2 Access Network Requirements.5-10 31 5.8 Message Formats 5-12 32 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without licens