TIA-881-1-2008 MAP Location Services Enhancements (Addendum to TIA-881)《MAP增强型定位服务 TIA-881的补充件》.pdf

《TIA-881-1-2008 MAP Location Services Enhancements (Addendum to TIA-881)《MAP增强型定位服务 TIA-881的补充件》.pdf》由会员分享，可在线阅读，更多相关《TIA-881-1-2008 MAP Location Services Enhancements (Addendum to TIA-881)《MAP增强型定位服务 TIA-881的补充件》.pdf（242页珍藏版）》请在麦多课文档分享上搜索。

1、 TIA-881-1E-2008 APPROVED: JANUARY 1, 2008 REAFFIRMED: AUGUST 15, 2012 TIA-881-1E (Addendum to TIA-881) January 2008MAP Location Services Enhancements NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacture

2、rs and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non

3、-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by T

4、IA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safet

5、y problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. 3-4747-AD1E, formula

6、ted under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use

7、or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applicatio

8、ns are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a pa

9、rty to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provid

10、ed in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a stan

11、dard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letter

12、s of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publicat

13、ions of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or

14、 services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILI

15、TY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFE

16、TY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT

17、 LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED O

18、F THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-881-1E12345678910111213141516171819202122232425262728293031323334353637383940414243444546474

19、8495051525354555657585960ContentsiMAP LOCATION SERVICES ENHANCEMENTSCONTENTSList of Figures.viList of Tables.viiForeword.viiiRevision History.ixIntroduction.11 Objective12 Normative References13 Organization.24 Assumptions.25 Editorial Conventions.5LCS Features Descriptions.71 References71.1 Normati

20、ve References72 Definitions and Concepts.72.1 Definitions73 Network Capabilities103.1 Location Services (LCS)103.1.1 Position Information103.1.1.1 Reference System103.1.1.2 Shapes113.1.1.3 Velocity.113.1.1.4 Timestamp.123.1.2 LCS Client Subscription123.1.3 Position Quality of Service (PQOS)123.1.4 S

21、ecurity143.1.5 Target MS Privacy.143.1.6 Normal Procedures with Successful Outcome143.1.7 Exception Procedures or Unsuccessful Outcome163.1.8 Alternate Procedures.163.1.9 Interactions With Other Network Services163.2 Location Information Restriction (LIR).183.2.1 Normal Procedure With Successful Out

22、come.183.2.2 Exception Procedures or Unsuccessful Outcome203.2.3 Alternative Procedures21TIA-881-1EContents123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960ii3.2.4 Interactions With Other Wireless Services.21MAP Functional Overview221 Def

23、initions and Documentation Conventions221.1 Definitions.222 Symbols and Abbreviations.253 Network Reference Model.263.1 Location Services Enhancements263.1.1 Network Entities.26Automatic Roaming Information Flows281 General Position Determination Technologies281.1 Successful Position Determination28

24、1.1.1 MS Registration281.1.2 Successful Position Determination: Home MPC is the Serving MPC.301.1.3 Successful Position Determination: Home MPC is Not Serving MPC321.1.4 Successful Position Determination: Serving MPC Address Has Changed.351.1.5 Successful Position Determination After Intersystem Han

25、doff391.1.6 Multiple LCS Client Requests Managed by Home MPC.421.1.7 Multiple LCS Client Requests Managed by Serving MPC451.1.8 Successful Serving System Initiated Position Determination.471.1.9 Position Determination for HLR-Based Service.491.1.10 Successful Call-Related LCS521.2 Unsuccessful Posit

26、ion Determination.541.2.1 LCS Client Denied Access by Home MPC541.2.2 Unsuccessful Serving System Initiated Position Determination552 CDMA MS-Assisted Position Determination.572.1 Successful CDMA MS-Assisted Position Determination.572.1.1 MS Idle572.1.2 MS Engaged in Call612.1.3 Continuation of Posi

27、tion Determination After Handoff.652.2 Call-Related LCS Call Release.692.3 Interaction with Non-Emergency Services Calls732.3.1 Successful Resumption of Position Determination after Call Delivery732.3.2 Unsuccessful Position Determination: Call Delivery While Awaiting MS Response.762.3.3 Unsuccessfu

28、l Position Determination: Call Delivery After Response Sent to PDE.782.3.4 Unsuccessful Position Determination: Non-Emergency Services Call Origination802.4 Interactions with Phase II Emergency Services Calls.822.4.1 Ongoing Position Determination Ended by Emergency Services Call.832.4.2 Blocking of

29、 Value Added Service Positioning.872.4.3 Interactions After Intersystem Handoff89TIA-881-1E123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960Contentsiii2.4.4 VAS Position Determination Delayed by Emergency Services Call Single MPC.942.4.5

30、Position Determination Initiated in Anchor System Ended by Emergency Services Call After Intersystem Handoff.982.4.6 Position Determination Initiated in a Tandem System Ended by Emergency Services Call1032.5 Failure Cases1082.5.1 Radio Contact Failure1082.5.2 Traffic Channel Failure or Traffic Chann

31、el Release.1092.5.3 Failure After Intersystem Handoff1102.5.4 PDE Unavailable.1142.5.5 PDE Failure.1152.5.6 Traffic Channel Inactivity Timer Expiry.1172.5.7 Traffic Channel Inactivity Timer Expiry While Awaiting MS Response.1193 Coarse Position Determination.1213.1 MS Idle.1213.2 MS Engaged in Call.

32、1243.3 Position Determination After Intersystem Handoff.127MAP Signaling Protocol.1315 Data Transfer Services.1315.1 SS7-Based Data Transfer Services1316 Application Services1316.4 MAP Operations1316.4.1 General1316.4.1.2 Operation Specifiers1316.4.2 Operation Definitions1316.4.2.14 FlashRequest1326

33、.4.2.37 RegistrationNotification1336.4.2.43 SMSDeliveryPointToPoint1346.4.2.am GeoPositionRequest1386.4.2.an InterSystemPositionRequest1416.4.2.ao InterSystemPositionRequestForward1456.4.2.au LCSParameterRequest.1486.4.2.ay PositionEventNotification.1506.5 Map Parameters.1526.5.1 General1526.5.1.2 P

34、arameter Identifiers.1526.5.2 Parameter Definitions1546.5.2.2 AccessDeniedReason1546.5.2.3 ActionCode1556.5.2.97 Profile1566.5.2.125 SMS_CauseCode.1576.5.2.w ServiceIndicator.1596.5.2.fk GeographicPosition.1606.5.2.fo MobInfo_CDMA.161TIA-881-1EContents123456789101112131415161718192021222324252627282

35、930313233343536373839404142434445464748495051525354555657585960iv6.5.2.fr PositionInformation1626.5.2.fs PositionRequestType1636.5.2.ft PositionResult.1656.5.2.gd CDMAServingOneWayDelay21676.5.2.go LCS_Client_ID.1686.5.2.gx LCSBillingID1706.5.2.gy LIRAuthorization1716.5.2.gz LIRMode.1726.5.2.ha MPCA

36、ddress.1746.5.2.hb MPCID1786.5.2.hc PositionQualityOfService.1796.5.2.hd PQOS_HorizontalPosition1806.5.2.he PQOS_HorizontalVelocity.1826.5.2.hf PQOS_MaximumPositionAge1836.5.2.hg PQOS_PositionPriority.1846.5.2.hh PQOS_ResponseTime.1856.5.2.hi PQOS_VerticalPosition1866.5.2.hj PQOS_VerticalVelocity188

37、6.5.2.hk Horizontal_Velocity1896.5.2.hl Vertical_Velocity1906.5.2.hm MPCAddressList.191MAP Signaling Procedures1921 Basic Call Processing1921.1 Registration Call Tasks.1921.1.1 Loading of Profile Parameters1922 Intersystem Procedures1932.1 Registration Notification.1932.1.1 MSC Initiating MS Registr

38、ation.1932.1.2 VLR Receiving RegistrationNotification INVOKE.1932.2 SMS Delivery Point-To-Point.1982.2.1 MSC Receiving an SMSDeliveryPointToPoint INVOKE.1982.2.2 Anchor MSC Initiating SMS Delivery Point-To-Point2022.2.V SMS Delivery Point-To-Point for Position Data Message Exchange2032.2.V.1 MSC Rec

39、eiving SMDPP INVOKE for Position Data Message Exchange.2034.W InterSystem Position Request2064.W.1 MSC Receiving an InterSystemPositionRequest INVOKE.2064.X Intersystem Position Request Forward2124.X.1 MSC Receiving an InterSystemPositionRequestForward INVOKE2124.Y LCS Parameter Request2154.Y.1 HLR

40、Receiving LCSParameterRequest INVOKE2154.Z Position Event Notification.2164.Z.1 MSC Initiating Position Event Notification2167 Operation Timer Values217TIA-881-1E123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960ContentsvD Annex D: SMS Air

41、 Interface Delivery Point-To-Point219D.5 Serving MSC Receiving an SMD-REQUEST.219Annex A: Mobile Station Implementation.222Annex B: MPC and PDE Operation Timer Implementation223TIA-881-1EList of Figures12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535

42、4555657585960viLIST OF FIGURESFigure X Network Reference Model for Location Services Enhancements.26TIA-801-1E123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960List of TablesviiLIST OF TABLESLCS Features DescriptionsTable 1 LIR Subscriptio

43、n Options.19MAP Signaling ProtocolTable 1 MTP Message Priority Values for MAP Operations131Table 8 MAP Operation Specifiers131Table 10 Summary of MAP Operations131Table 11 NE Combinations for GPOSREQ.138Table 12 NE Combinations for ISPOSREQ141Table 13 NE Combinations for ISPOSREQFWD.145Table 14 NE C

44、ombinations for LCSParameterRequest148Table 15 NE Combinations for PositionEventNotification.150Table 16 MAP Parameter Identifiers.152Table 17 Horizontal Position Accuracy r Corresponding to Values of K.181Table 18 Vertical Position Accuracy r Corresponding to Values of K.187MAP Signaling Procedures

45、Table 1 HLR LCSParameterRequest Response.215Table 2 Operation Timer Values.217Annex B: MPC and PDE Operation Timer ImplementationTable 1 Guidelines for MPC and PDE Operation Timer Values.224TIA-881-1EForeword12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505

46、1525354555657585960viiiFOREWORD(This foreword is not part of this Standard.)This document was prepared by 3GPP2 TSG-X and was balloted and published by TIATR-45.2. This document specifies the intersystem operations that enable a wireless systemto provide enhanced location services. This version adds

47、 support for the Mobile EquipmentIdentity (MEID) and supersedes the previous version.“Shall” and “shall not” identify requirements to be followed strictly to conform to thisStandard and from which no deviation is permitted. “Should” and “should not” indicate thatone of several possibilities is recom

48、mended as particularly suitable, without mentioning orexcluding others, that a certain course of action is preferred but not necessarily required, orthat (in the negative form) a certain possibility or course of action is discouraged but notprohibited. “May” and “need not” indicate a course of actio

49、n permissible within the limitsof the document. “Can” and “cannot” are used for statements of possibility and capability,whether material, physical or causal.TIA-881-1E123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960Revision HistoryixREVISION HISTORYRevision Date Remarks0 March 2004 Initial Publication1E May 2006 Support for the MEIDTIA-881-1ERevision History123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960x(This page is intentionally lef