TIA-2001 3-E-4-2014 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces - Part 3 Features (Addendum to TIA-2001 3-E).pdf

《TIA-2001 3-E-4-2014 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces - Part 3 Features (Addendum to TIA-2001 3-E).pdf》由会员分享，可在线阅读，更多相关《TIA-2001 3-E-4-2014 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces - Part 3 Features (Addendum to TIA-2001 3-E).pdf（392页珍藏版）》请在麦多课文档分享上搜索。

1、 TIA-2001.3-E-4 (Addendum to TIA-2001.3-E) April 2014Interoperability Specification (IOS) for cdma2000Access Network Interfaces- Part 3 Features NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and

2、 purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-membe

3、r of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in

4、accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety prob

5、lems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of trademarks in this document are f

6、or information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. TIA-PN-2001.3-E-4, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee

7、 of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or iss

8、ued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manu

9、al. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or

10、 judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normat

11、ive References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional element

12、s (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engine

13、ering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent

14、 applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, I

15、NCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILIT

16、IES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY W

17、ITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS O

18、F PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREO

19、F, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-2001.3-E-4 Revision History Date Publication Description June 2007 A.S0013-D v1.0 For features supported, refer to the Overview 11, section 1.1. August 2009 A.S0013-D v2.0 Updates to support 1x air interface enhancemen

20、ts, EVRC-WB on A2p, EVRC-NW on A2 and A2p and bug fixes. May 2011 A.S0013-D v3.0 Support for callback of an emergency call origination, EVRC-NW capacity operating point 0, and bug fixes. August 2012 A.S0013-D v4.0 Support for EVRC-B, EVRC-WB, EVRC-NW, EVRC-NW2K, USSD, MSC-BS indication of Device Typ

21、e and bug fix. March 2014 A.S0013-D v5.0 Support for USSD on common channel, M2M IOS and bug fix. TIA-2001.3-E-4 (This page intentionally left blank.) TIA-2001.3-E-4 Table of Contents 1 2 3 Foreword xvii 4 1.0 Introduction 1 5 1.1 Overview 1 6 1.1.1 Purpose . 6 7 1.1.2 Scope 6 8 1.2 References 6 9 1

22、.2.1 Normative References 6 10 1.2.2 Informative References 8 11 1.3 Terminology . 8 12 1.3.1 Acronyms . 8 13 1.3.2 Definitions 11 14 1.4 Call Processing and Supplementary Services Assumptions . 12 15 1.4.1 Call Control 12 16 1.4.1.1 A2, and A5 Bearer Allocation . 12 17 1.4.1.2 Radio Channel Allocat

23、ion . 12 18 1.4.1.3 Traffic Channel Release 12 19 1.4.1.4 A3 User Traffic Subchannel Allocation 12 20 1.4.1.5 A2p Bearer Allocation . 13 21 1.5 Radio Resource Management Assumptions . 13 22 1.5.1 Radio Channel Supervision 13 23 1.5.1.1 Traffic Channel Radio Link Supervision . 13 24 1.5.1.2 Idle Chan

24、nel Observation 13 25 1.5.2 Radio Channel Management 13 26 1.5.2.1 Radio Channel Configuration Management 13 27 1.5.2.2 Radio Traffic Channel Management . 13 28 1.5.2.2.1 Radio Channel Allocation . 13 29 1.5.2.2.2 Radio Traffic Channel Release . 14 30 1.5.2.2.3 Radio Traffic Channel Power Control 14

25、 31 1.5.2.2.4 Channel Encoding and Decoding 14 32 1.6 Documentation Conventions 14 33 2.0 Feature Descriptions . 15 34 2.1 Call Setup of Voice and Circuit Data Calls 15 35 2.2 Call Clearing of Voice and Circuit Data Calls . 15 36 2.2.1 Call Clearing Initiated by the MS or BS 15 37 2.2.2 Call Clearin

26、g Initiated by the MSC 16 38 2.3 Tandem Free Operation (TFO) Support . 16 39 2.4 Test Calls 17 40 2.5 Support of DTMF . 18 41 2.6 Support of Supplementary Services . 18 42 2.6.1 Feature Activation and Deactivation 18 43 2.6.2 Call Waiting . 19 44 2.6.3 Three Way Calling . 19 45 2.6.4 Message Waiting

27、 Notification 19 46 2.6.5 Call Barring 20 47 2.6.6 Calling Number ID Presentation / Restriction 20 48 2.6.6.1 CNIR for Mobile Originated Calls 21 49 2.6.6.2 CNIP/CNIR for Mobile Terminated Calls . 21 50 2.6.7 Distinctive Ringing 21 51 2.6.8 Answer Holding . 21 52 2.6.9 User Selective Call Forwarding

28、 . 22 53 2.7 Mobile Registration 22 54 2.8 Global Emergency Call Origination . 22 55 i TIA-2001.3-E-4 2.9 E911 Phase 1 and Phase 2 23 1 2.10 Short Message Service . 23 2 2.11 Priority Access and Channel Assignment (PACA) 24 3 2.12 Over-The-Air Service Provisioning (OTASP) and Over The Air Parameter

29、Administration 4 (OTAPA) 25 5 2.12.1 OTASP Support . 25 6 2.12.2 OTAPA Support . 25 7 2.13 Mobile Position Determination 25 8 2.13.1 Support of Position Determination Services (MS PDE Approach) . 25 9 2.13.2 Software Calculation Position Determination (BS MSC Approach) 26 10 2.14 User Zone . 26 11 2

30、.15 ISDN Interworking . 26 12 2.16 Circuit Data Calls . 27 13 2.17 3G Packet Data Calls . 27 14 2.17.1 Packet Data Assumptions . 29 15 2.17.2 Previous and Current Access Network Identifiers (PANID/CANID) 30 16 2.17.3 PDSN Selection Algorithm 30 17 2.17.4 Packet Data Interface Descriptions 30 18 2.17

31、.4.1 A8/A9 Interface Descriptions 30 19 2.17.4.2 A10/A11 Interface Descriptions 31 20 2.17.5 Interoperability Control 31 21 2.17.6 Short Data Bursts . 31 22 2.17.7 Common Channel Packet Data (CCPD) 32 23 2.17.8 Packet Data Security Considerations . 32 24 2.17.9 Support for AAA-Based Radio Network Pa

32、cket Data Inactivity Timer (RN-PDIT) . 33 25 2.17.10 Support for Always-on Service 33 26 2.17.11 1x-Evolved High-Speed Integrated Data and Voice Support . 33 27 2.17.12 Flow Control 34 28 2.18 Concurrent Services (Circuit Voice and Packet Data) . 34 29 2.19 Handoff 34 30 2.19.1 Handoff via MSC . 34

33、31 2.19.2 Handoff via Direct BS-to-BS Signaling . 35 32 2.19.3 Inter-BS Hard Handoff into Intra-BS Soft Handoff . 35 33 2.19.4 Fast Handoff . 35 34 2.19.5 Intergeneration Packet Data Handoff . 39 35 2.19.6 Alternate Dormant Handoff . 39 36 2.20 Security Features 40 37 2.20.1 Authentication 40 38 2.2

34、0.1.1 2G Terminal Authentication and Key Generation . 40 39 2.20.1.2 3G Authentication and Key Generation 41 40 2.20.2 Signaling Message Encryption . 42 41 2.20.3 Voice/Data Privacy 42 42 2.20.4 Extended Encryption for Signaling and User Traffic . 42 43 2.20.5 Message Integrity . 43 44 2.21 Flex Rat

35、e 43 45 2.22 Status Inquiry . 43 46 2.23 3X Multi-Carrier Operation . 44 47 2.24 5 ms Messaging 44 48 2.25 Enhanced Rate Adaptation Mode (ERAM) 44 49 2.26 Code Combining Soft Handoff (CCSH) 44 50 2.27 Rescue Channel 44 51 2.28 Terrestrial Circuit Management . 45 52 2.28.1 Terrestrial Circuit Managem

36、ent for the A2/A5 Interface . 45 53 2.28.2 Terrestrial Circuit Management for the A3 Interface . 45 54 2.29 Vocoder Support 46 55 2.30 Reverse FCH Gating 46 56 ii TIA-2001.3-E-4 2.31 Voice-over-IP (VoIP) . 47 1 2.31.1 Voice over IP Handoff Considerations 47 2 2.32 Network Directed System Selection (

37、NDSS) . 47 3 2.33 Transcoder Free Operation (TrFO) 48 4 2.34 Remote Transcoder Operation (RTO) 48 5 2.35 Voice Preference Over Packet (VPOP) 48 6 2.36 Circuit-Switched Video Conferencing Calls 49 7 2.37 Fast Call Setup . 49 8 2.37.1 Direct Channel Assignment . 49 9 2.38 Support for cdma2000 Pre-Rev

38、D MEID Capable Mobiles . 49 10 2.39 Support for Enhanced Frequency Hashing and Band Subclasses 49 11 2.40 Event Notification 50 12 2.41 Additional Geographical Location Information . 50 13 2.42 Flex Duplex Channel 50 14 2.43 Unstructured Supplementary Service Data 50 15 2.44 1x Device Capability 51

39、16 2.45 Features Supported Transparently in this Standard 51 17 2.45.1 Emergency Service (Basic) via Specific Dialed Number . 51 18 2.45.2 Carrier Access 51 19 2.45.3 Call Forwarding . 51 20 2.45.3.1 Call Forwarding Unconditional . 52 21 2.45.3.2 Call Forwarding When Busy . 52 22 2.45.3.3 Call Forwa

40、rding - No Answer . 52 23 2.45.3.4 Call Forward Default . 52 24 2.45.4 Call Delivery 52 25 2.45.5 Advice of Charge . 52 26 2.45.6 Call Transfer 53 27 2.45.7 Lawfully Authorized Wiretap 53 28 2.45.8 Access Control by Call Type (ACCT) . 53 29 3.0 Feature Call Flows . 55 30 3.1 Call Setup of Voice and

41、Circuit Data Calls 55 31 3.1.1 Mobile Origination Examples 55 32 3.1.1.1 Mobile Origination 55 33 3.1.1.1.1 Mobile Origination via a Circuit-Switched MSC . 55 34 3.1.1.1.2 Mobile Origination with an MSCe with Bearer Parameters Sent in the CM 35 Service Request Message 58 36 3.1.1.1.3 Mobile Originat

42、ion with an MSCe with Bearer Parameters Sent in the 37 Assignment Complete Message 61 38 3.1.1.2 Mobile Origination with Access Probe Handoff, Access Handoff and Channel 39 Assignment into Soft/Softer Handoff 65 40 3.1.2 Mobile Termination Examples . 70 41 3.1.2.1 Mobile Termination . 70 42 3.1.2.1.

43、1 Mobile Termination via a Circuit-Switched MSC 70 43 3.1.2.1.2 Mobile Termination via an MSCe with the Bearer Parameters Sent in the Paging 44 Response Message 73 45 3.1.2.1.3 Mobile Termination via an MSCe Interfaces with Bearer Parameters Sent in the 46 Assignment Complete Message 75 47 3.1.2.2 M

44、obile Termination, Assignment Retry 78 48 3.1.3 Mid-Call Bearer Modification Examples . 81 49 3.1.3.1 MSCe Initiated Bearer Modification . 81 50 3.1.3.2 BS Initiated Bearer Modification . 82 51 3.1.3.3 A1p Support for COP 0 . 82 52 3.2 Call Clearing of Voice and Circuit Data Calls . 84 53 3.2.1 Call

45、 Clearing Initiated by the MS or BS 84 54 3.2.2 Call Clearing Initiated by the MSC 84 55 3.2.2.1 Clear from the Network . 84 56 iii TIA-2001.3-E-4 3.2.2.2 Call Clearing when Tones/Announcements are Provided . 85 1 3.2.2.3 Mobile Origination Failure Call Clearing with Local Tone Generation . 85 2 3.2

46、.3 Call Clearing Collision . 86 3 3.2.4 Call Flows for Call Clear Operation. 87 4 3.2.4.1 Call Clear via Clear Request (MS Initiated) 87 5 3.2.4.2 Call Clear via Clear Request (BS Initiated) . 87 6 3.2.4.3 Call Clear via Clear Command 88 7 3.3 TFO Support 89 8 3.3.1 Call Flows for Transcoder Control

47、 . 89 9 3.4 Test Calls 89 10 3.5 Support of DTMF . 89 11 3.6 Support of Supplementary Services . 89 12 3.6.1 Feature Activation and Deactivation 90 13 3.6.1.1 Feature Activation/Deactivation in Idle Mode 90 14 3.6.1.2 Feature Activation/Deactivation While in a Call . 90 15 3.6.2 Call Waiting . 91 16

48、 3.6.3 Three Way Calling . 92 17 3.6.3.1 Three-Way Calling (Method 1) 92 18 3.6.3.2 Three-Way Calling - (Method 2) . 93 19 3.6.4 Message Waiting Notification 94 20 3.6.4.1 Message Waiting Notification on the Paging Channel 94 21 3.6.4.2 Message Waiting Notification on the Traffic Channel 95 22 3.6.5

49、 Call Barring 95 23 3.6.5.1 Call Barring Incoming . 95 24 3.6.5.2 Call Barring Outgoing . 95 25 3.6.6 Calling Number ID Presentation/Restriction 96 26 3.6.7 Distinctive Ringing 96 27 3.6.8 Answer Holding . 96 28 3.6.8.1 Answer Holding of a Mobile Terminated Call 97 29 3.6.8.2 Answer Holding of Call Waiting . 97 30 3.6.9 User Selective Call Forwarding . 98 31 3.6.9.1 User Selective Call Forwarding of a Mobile Terminated Call 99 32 3.6.9.2 User Selective Call Forwarding of Call Waiting . 99 33 3.7 Mobile Registration .100 34 3.7.1 Mobile Initiated Location Registration .101 35 3.