TIA-2001 3-E-2-2011 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces C Part 3 Features (Addendum to TIA-2001 3-E).pdf

《TIA-2001 3-E-2-2011 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces C Part 3 Features (Addendum to TIA-2001 3-E).pdf》由会员分享，可在线阅读，更多相关《TIA-2001 3-E-2-2011 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces C Part 3 Features (Addendum to TIA-2001 3-E).pdf（378页珍藏版）》请在麦多课文档分享上搜索。

1、 TIA-2001.3-E-2 (Addendum to TIA-2001.3-E) September 2011Interoperability Specification (IOS) for cdma2000 Access Network Interfaces-Part 3 Features NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers

2、 and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-m

3、ember of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA

4、 in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety

5、problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. PN-3-4545.3-RV5-AD2, f

6、ormulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. Th

7、e use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent appl

8、ications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither b

9、e a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or

10、provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as

11、a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or

12、letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or pu

13、blications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, desi

14、gns or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHAN

15、TABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR TH

16、E SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING W

17、ITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADV

18、ISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. Revision History Date Publication Description June 2007 A.S0013-D v1.0 For features suppor

19、ted, refer to the Overview 11, section 1.1. August 2009 A.S0013-D v2.0 Updates to support 1x air interface enhancements, EVRC-WB on A2p, EVRC-NW on A2 and A2p and bug fixes. May 2011 A.S0013-D v3.0 Support for callback of an emergency call origination, EVRC-NW capacity operating point 0, and bug fix

20、es. TIA-2001.3-E-2 i Table of Contents 1 2 3 Foreword . xvi 4 1.0 Introduction 1 5 1.1 Overview 1 6 1.1.1 Purpose . 6 7 1.1.2 Scope 6 8 1.2 References 6 9 1.2.1 Normative References. 6 10 1.2.2 Informative References . 7 11 1.3 Terminology . 8 12 1.3.1 Acronyms 8 13 1.3.2 Definitions .11 14 1.4 Call

21、 Processing and Supplementary Services Assumptions 11 15 1.4.1 Call Control .12 16 1.4.1.1 A2, and A5 Bearer Allocation .12 17 1.4.1.2 Radio Channel Allocation 12 18 1.4.1.3 Traffic Channel Release.12 19 1.4.1.4 A3 User Traffic Subchannel Allocation 12 20 1.4.1.5 A2p Bearer Allocation .12 21 1.5 Rad

22、io Resource Management Assumptions 13 22 1.5.1 Radio Channel Supervision .13 23 1.5.1.1 Traffic Channel Radio Link Supervision .13 24 1.5.1.2 Idle Channel Observation 13 25 1.5.2 Radio Channel Management 13 26 1.5.2.1 Radio Channel Configuration Management 13 27 1.5.2.2 Radio Traffic Channel Managem

23、ent 13 28 1.5.2.2.1 Radio Channel Allocation .13 29 1.5.2.2.2 Radio Traffic Channel Release .13 30 1.5.2.2.3 Radio Traffic Channel Power Control 13 31 1.5.2.2.4 Channel Encoding and Decoding 13 32 2.0 Feature Descriptions 15 33 2.1 Call Setup of Voice and Circuit Data Calls .15 34 2.2 Call Clearing

24、of Voice and Circuit Data Calls.15 35 2.2.1 Call Clearing Initiated by the MS or BS 15 36 2.2.2 Call Clearing Initiated by the MSC .16 37 2.3 Tandem Free Operation (TFO) Support 16 38 2.4 Test Calls .17 39 2.5 Support of DTMF 18 40 2.6 Support of Supplementary Services .18 41 2.6.1 Feature Activatio

25、n and Deactivation .18 42 2.6.2 Call Waiting .19 43 2.6.3 Three Way Calling .19 44 2.6.4 Message Waiting Notification .19 45 2.6.5 Call Barring .20 46 2.6.6 Calling Number ID Presentation / Restriction .20 47 2.6.6.1 CNIR for Mobile Originated Calls 21 48 2.6.6.2 CNIP/CNIR for Mobile Terminated Call

26、s .21 49 2.6.7 Distinctive Ringing 21 50 2.6.8 Answer Holding .21 51 2.6.9 User Selective Call Forwarding .22 52 2.7 Mobile Registration .22 53 2.8 Global Emergency Call Origination 22 54 2.9 E911 Phase 1 and Phase 2 .23 55 TIA-2001.3-E-2 ii 2.10 Short Message Service .23 1 2.11 Priority Access and

27、Channel Assignment (PACA) .24 2 2.12 Over-The-Air Service Provisioning (OTASP) and Over The Air Parameter Administration 3 (OTAPA) .25 4 2.12.1 OTASP Support .25 5 2.12.2 OTAPA Support 25 6 2.13 Mobile Position Determination 25 7 2.13.1 Support of Position Determination Services (MS PDE Approach) 25

28、 8 2.13.2 Software Calculation Position Determination (BS MSC Approach) 26 9 2.14 User Zone 26 10 2.15 ISDN Interworking 26 11 2.16 Circuit Data Calls 27 12 2.17 3G Packet Data Calls .27 13 2.17.1 Packet Data Assumptions 29 14 2.17.2 Previous and Current Access Network Identifiers (PANID/CANID)30 15

29、 2.17.3 PDSN Selection Algorithm 30 16 2.17.4 Packet Data Interface Descriptions 30 17 2.17.4.1 A8/A9 Interface Descriptions 30 18 2.17.4.2 A10/A11 Interface Descriptions 31 19 2.17.5 Interoperability Control .31 20 2.17.6 Short Data Bursts .31 21 2.17.7 Common Channel Packet Data (CCPD) 32 22 2.17.

30、8 Packet Data Security Considerations .32 23 2.17.9 Support for AAA-Based Radio Network Packet Data Inactivity Timer (RN-PDIT) .33 24 2.17.10 Support for Always-on Service 33 25 2.17.11 1x-Evolved High-Speed Integrated Data and Voice Support 33 26 2.17.12 Flow Control 34 27 2.18 Concurrent Services

31、(Circuit Voice and Packet Data) .34 28 2.19 Handoff 34 29 2.19.1 Handoff via MSC .34 30 2.19.2 Handoff via Direct BS-to-BS Signaling.35 31 2.19.3 Inter-BS Hard Handoff into Intra-BS Soft Handoff .35 32 2.19.4 Fast Handoff 35 33 2.19.5 Intergeneration Packet Data Handoff .39 34 2.19.6 Alternate Dorma

32、nt Handoff .39 35 2.20 Security Features .40 36 2.20.1 Authentication40 37 2.20.1.1 2G Terminal Authentication and Key Generation .40 38 2.20.1.2 3G Authentication and Key Generation .41 39 2.20.2 Signaling Message Encryption 42 40 2.20.3 Voice/Data Privacy 42 41 2.20.4 Extended Encryption for Signa

33、ling and User Traffic 42 42 2.20.5 Message Integrity .43 43 2.21 Flex Rate 43 44 2.22 Status Inquiry .43 45 2.23 3X Multi-Carrier Operation .44 46 2.24 5 ms Messaging .44 47 2.25 Enhanced Rate Adaptation Mode (ERAM) .44 48 2.26 Code Combining Soft Handoff (CCSH) 44 49 2.27 Rescue Channel .44 50 2.28

34、 Terrestrial Circuit Management .45 51 2.28.1 Terrestrial Circuit Management for the A2/A5 Interface.45 52 2.28.2 Terrestrial Circuit Management for the A3 Interface 45 53 2.29 Vocoder Support 46 54 2.30 Reverse FCH Gating 46 55 2.31 Voice-over-IP (VoIP) 47 56 TIA-2001.3-E-2 iii 2.31.1 Voice over IP

35、 Handoff Considerations 47 1 2.32 Network Directed System Selection (NDSS) 47 2 2.33 Transcoder Free Operation (TrFO) 48 3 2.34 Remote Transcoder Operation (RTO) .48 4 2.35 Voice Preference Over Packet (VPOP) .48 5 2.36 Circuit Switched Video Conferencing Calls 49 6 2.37 Fast Call Setup .49 7 2.37.1

36、 Direct Channel Assignment .49 8 2.38 Support for cdma2000 Pre-Rev D MEID Capable Mobiles 49 9 2.39 Support for Enhanced Frequency Hashing and Band Subclasses 49 10 2.40 Event Notification50 11 2.41 Additional Geographical Location Information.50 12 2.42 Flex Duplex Channel .50 13 2.43 Features Supp

37、orted Transparently in this Standard .50 14 2.43.1 Emergency Service (Basic) via Specific Dialed Number 50 15 2.43.2 Carrier Access 51 16 2.43.3 Call Forwarding .51 17 2.43.3.1 Call Forwarding Unconditional .51 18 2.43.3.2 Call Forwarding When Busy .51 19 2.43.3.3 Call Forwarding - No Answer .51 20

38、2.43.3.4 Call Forward Default .52 21 2.43.4 Call Delivery 52 22 2.43.5 Advice of Charge .52 23 2.43.6 Call Transfer 52 24 2.43.7 Lawfully Authorized Wiretap 53 25 2.43.8 Access Control by Call Type (ACCT) .53 26 3.0 Feature Call Flows .55 27 3.1 Call Setup of Voice and Circuit Data Calls .55 28 3.1.

39、1 Mobile Origination Examples 55 29 3.1.1.1 Mobile Origination 55 30 3.1.1.1.1 Mobile Origination via a Circuit Switched MSC 55 31 3.1.1.1.2 Mobile Origination with an MSCe with Bearer Parameters Sent in the CM Service 32 Request Message .58 33 3.1.1.1.3 Mobile Origination with an MSCe with Bearer P

40、arameters Sent in the Assignment 34 Complete Message 61 35 3.1.1.2 Mobile Origination with Access Probe Handoff, Access Handoff and Channel 36 Assignment into Soft/Softer Handoff 65 37 3.1.2 Mobile Termination Examples 70 38 3.1.2.1 Mobile Termination .70 39 3.1.2.1.1 Mobile Termination via a Circui

41、t switched MSC .70 40 3.1.2.1.2 Mobile Termination via an MSCe with the Bearer Parameters sent in the Paging 41 Response Message 73 42 3.1.2.1.3 Mobile Termination via an MSCe Interfaces with Bearer Parameters sent in the 43 Assignment Complete Message 75 44 3.1.2.2 Mobile Termination, Assignment Re

42、try 78 45 3.1.3 Mid-Call Bearer Modification Examples .81 46 3.1.3.1 MSCe Initiated Bearer Modification .81 47 3.1.3.2 BS Initiated Bearer Modification .82 48 3.1.3.3 A1p Support for COP 0 .82 49 3.2 Call Clearing of Voice and Circuit Data Calls.83 50 3.2.1 Call Clearing Initiated by the MS or BS 84

43、 51 3.2.2 Call Clearing Initiated by the MSC .84 52 3.2.2.1 Clear from the Network .84 53 3.2.2.2 Call Clearing when Tones/Announcements are Provided .85 54 3.2.2.3 Mobile Origination Failure Call Clearing with Local Tone Generation .85 55 3.2.3 Call Clearing Collision 86 56 TIA-2001.3-E-2 iv 3.2.4

44、Call Flows for Call Clear Operation 86 1 3.2.4.1 Call Clear via Clear Request (MS Initiated) 87 2 3.2.4.2 Call Clear via Clear Request (BS Initiated) .87 3 3.2.4.3 Call Clear via Clear Command 88 4 3.3 TFO Support 89 5 3.3.1 Call Flows for Transcoder Control 89 6 3.4 Test Calls .89 7 3.5 Support of

45、DTMF 89 8 3.6 Support of Supplementary Services .89 9 3.6.1 Feature Activation and Deactivation .90 10 3.6.1.1 Feature Activation/Deactivation in Idle Mode .90 11 3.6.1.2 Feature Activation/Deactivation While in a Call .90 12 3.6.2 Call Waiting .91 13 3.6.3 Three Way Calling .92 14 3.6.3.1 Three-Way

46、 Calling (Method 1) 92 15 3.6.3.2 Three-Way Calling - (Method 2) .93 16 3.6.4 Message Waiting Notification .94 17 3.6.4.1 Message Waiting Notification on the Paging Channel 94 18 3.6.4.2 Message Waiting Notification on the Traffic Channel 95 19 3.6.5 Call Barring .95 20 3.6.5.1 Call Barring Incoming

47、 .95 21 3.6.5.2 Call Barring Outgoing .95 22 3.6.6 Calling Number ID Presentation/Restriction .96 23 3.6.7 Distinctive Ringing 96 24 3.6.8 Answer Holding .96 25 3.6.8.1 Answer Holding of a Mobile Terminated Call 97 26 3.6.8.2 Answer Holding of Call Waiting .97 27 3.6.9 User Selective Call Forwarding

48、 .98 28 3.6.9.1 User Selective Call Forwarding of a Mobile Terminated Call .99 29 3.6.9.2 User Selective Call Forwarding of Call Waiting .99 30 3.7 Mobile Registration .100 31 3.7.1 Mobile Initiated Location Registration 101 32 3.7.2 Power Down Registration at the End of a Call 101 33 3.7.3 Network

49、Initiated Location Registration .102 34 3.7.4 Mobile Station Registered Notification .103 35 3.8 Global Emergency Call Origination 103 36 3.9 E911 Phase I and Phase 2 103 37 3.10 Short Message Service .103 38 3.10.1 SMS Feature Description .104 39 3.10.1.1 SMS - Mobile Originated Point-to-Point .104 40 3.10.1.2 SMS - Mobile Terminated Point-to-Point 104 41 3.10.1.3 SMS - Broadcast 104 42 3.10.2 SMS Delivery on a Common Channel .105 43 3.10.2.1 SMS Broadcast Delivery over a Common Channel .105 44 3.10.2.2 SMS Receipt from an MS on the Access Channel .105 45 3.10.2.3 SMS Delivery t