TIA-126-E-2011 Loopback Service Options (LSO) for cdma2000 Spread Spectrum Systems《cdma2000扩频系统的Loopback业务选项(LSO)》.pdf

《TIA-126-E-2011 Loopback Service Options (LSO) for cdma2000 Spread Spectrum Systems《cdma2000扩频系统的Loopback业务选项(LSO)》.pdf》由会员分享，可在线阅读，更多相关《TIA-126-E-2011 Loopback Service Options (LSO) for cdma2000 Spread Spectrum Systems《cdma2000扩频系统的Loopback业务选项(LSO)》.pdf（66页珍藏版）》请在麦多课文档分享上搜索。

1、 TIA-126-E December 2011Loopback Service Options (LSO) for cdma2000Spread Spectrum Systems NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and impro

2、vement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not co

3、nforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Instit

4、ute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulat

5、ory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. 3-4578-RV5, formulated under the cognizance of the TIA TR-45 Mobile (b) there is

6、 no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use

7、of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from

8、 the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, whic

9、h are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Docu

10、ment or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether su

11、ch reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii)

12、 TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to

13、TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of th

14、e Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL P

15、ROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVIC

16、E REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONS

17、EQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF

18、DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. 3GPP2 C.S0013-B v1.0 Revision History 1 Revision Description of Changes Date Rev 0 v1.0 Publication Rev A v1.0 Added LSO for new SOs Rev B v1.0 Rev E cdma200

19、0 LSO January 2011 2 3 3GPP2 C.S0013-B v1.0 CONTENTS i FOREWORD . ix 1 NOTES . xi 2 1 General 1-1 3 1.1 Scope 1-1 4 1.2 Terms and Numeric Information . 1-1 5 1.3 References 1-2 6 2 Service Option 2, 9, 30, 31, 55, and 75 2-1 7 2.1 General Description 2-1 8 2.2 Service Option Numbers . 2-2 9 2.3 Mult

20、iplex Option . 2-2 10 2.3.1 Required Multiplex Option Support . 2-2 11 2.3.1.1 Service Option 2 2-2 12 2.3.1.2 Service Option 9 2-2 13 2.3.1.3 Service Option 30 2-3 14 2.3.1.4 Service Option 31 2-3 15 2.3.1.5 Service Option 55 2-3 16 2.3.1.6 Service Option 75 2-3 17 2.3.2 Interface to Multiplex Opti

21、ons . 2-3 18 2.3.2.1 Service Option 2 2-3 19 2.3.2.1.1 Transmitted Fundamental Data Blocks . 2-3 20 2.3.2.1.2 Received Fundamental Data Blocks . 2-4 21 2.3.2.2 Service Option 9 2-5 22 2.3.2.2.1 Transmitted Fundamental Data Blocks . 2-5 23 2.3.2.2.2 Received Fundamental Data Blocks . 2-6 24 2.3.2.3 S

22、ervice Option 30 2-6 25 2.3.2.3.1 Transmitted Fundamental Data Blocks . 2-6 26 2.3.2.3.2 Received Supplemental Data Blocks 2-7 27 2.3.2.4 Service Option 31 2-7 28 2.3.2.4.1 Transmitted Fundamental Data Blocks . 2-7 29 2.3.2.4.2 Received Supplemental Data Blocks 2-8 30 2.3.2.5 Service Option 55 2-9 3

23、1 2.3.2.5.1 Transmitted Fundamental Data Blocks . 2-9 32 3GPP2 C.S0013-B v1.0 CONTENTS ii 2.3.2.5.2 Received Fundamental Data Blocks 2-9 1 2.3.2.6 Service Option 75 2-9 2 2.3.2.6.1 Transmitted Fundamental Data Blocks . 2-9 3 2.3.2.6.2 Received Fundamental Data Blocks 2-10 4 2.3.3 Service Option Nego

24、tiation, Service Negotiation, and Activation . 2-11 5 2.3.3.1 Procedures Using Service Option Negotiation 2-11 6 2.3.3.1.1 Initialization and Connection in the Mobile Station . 2-11 7 2.3.3.1.2 Initialization and Connection in the Base Station 2-12 8 2.3.3.1.3 Service Option Control Orders . 2-12 9

25、2.3.3.2 Procedures Using Service Negotiation 2-12 10 2.3.3.2.1 Mobile Station Requirements . 2-12 11 2.3.3.2.2 Base Station Requirements . 2-16 12 2.4 Data Block Information Bits . 2-16 13 2.4.1 Service Option 2 2-16 14 2.4.2 Service Option 9 2-17 15 2.4.3 Service Option 30 2-18 16 2.4.4 Service Opt

26、ion 31 2-19 17 2.4.5 Service Option 55 2-19 18 2.4.6 Service Option 75 2-19 19 2.5 Mobile Station Processing . 2-20 20 2.5.1 Basic Data Block Processing . 2-20 21 2.5.1.1 Service Option 2 2-23 22 2.5.1.2 Service Option 9 2-25 23 2.5.1.3 Service Option 30 2-26 24 2.5.1.4 Service Option 31 2-27 25 2.5

27、.1.5 Service Option 55 2-27 26 2.5.1.6 Service Option 75 2-28 27 2.5.2 Processing Delays 2-29 28 2.6 Counters and Messages for Service Option 75 2-30 29 2.6.1 Counters . 2-30 30 2.6.2 Mobile Station Processing 2-30 31 2.6.3 Base Station Processing 2-31 32 3GPP2 C.S0013-B v1.0 CONTENTS iii 2.6.4 Base

28、 Station Message Formats 2-32 1 2.6.4.1 Control Directive for FCH 2-32 2 2.6.4.2 Control Directive for R-FCH 0 bps . 2-32 3 2.6.4.3 Control Directive for R-ACKCH1 2-33 4 2.6.4.4 Control Directive for F-ACKCH 2-33 5 2.6.4.5 Counter Retrieval Directive 2-34 6 2.6.4.6 Control Directive for R-ACKCH2 2-3

29、5 7 2.6.5 Mobile Station Message Formats . 2-35 8 2.6.5.1 F-ACKCH Receive Counters Response . 2-35 9 2.7 Computing Error Rate Statistics at the Base Station . 2-36 10 2.7.1 Forward Traffic Channel Frame Error Rates 2-36 11 2.7.1.1 Forward Fundamental Code Channel Frame Error Rate 2-36 12 2.7.1.2 For

30、ward Supplemental Code Channel Frame Error Rate 2-37 13 2.7.1.3 Forward Fundamental Channel Frame Error Rate for SO 75 . 2-38 14 2.7.2 Reverse Traffic Channel Frame Error Rates . 2-40 15 2.7.2.1 Reverse Fundamental Code Channel Frame Error Rate . 2-40 16 2.7.2.2 Reverse Supplemental Code Channel Fra

31、me Error Rate 2-40 17 2.7.2.3 Reverse Fundamental Channel Frame Error Rate for SO 75 2-40 18 2.7.2.4 Reverse Acknowledgement Channel 1 and 2 Error Rate for SO 75 . 2-41 19 20 21 3GPP2 C.S0013-B v1.0 CONTENTS iv This page intentionally left blank. 1 3GPP2 C.S0013-B v1.0 FIGURES v Figure 2.4.1-1. Data

32、 Block Formats for Service Option 2 . 2-17 1 Figure 2.4.2-1. Data Block Formats for Service Option 9 . 2-18 2 Figure 2.4.3-1. Data Block Format for Service Option 30. 2-19 3 Figure 2.4.4-1. Data Block Format for Service Option 31. 2-19 4 Figure 2.4.6-1. Data Block Formats for Service Option 75 . 2-2

33、0 5 Figure 2.5.2-1. Allowable Mobile Station Processing Delays . 2-30 6 7 8 9 3GPP2 C.S0013-B v1.0 FIGURES vi This page intentionally left blank. 1 3GPP2 C.S0013-B v1.0 TABLES vii Table 2.2-1. Multiplex Option in use for Service Option 55 2-2 1 Table 2.3.2.1.1-1. Fundamental Data Block Types Supplie

34、d by Service Option 2 to the 2 Multiplex Sublayer 2-4 3 Table 2.3.2.1.2-1. Fundamental Data Block Types Supplied by the Multiplex Sublayer to 4 Service Option 2 . 2-5 5 Table 2.3.2.2.1-1. Fundamental Data block Types Supplied by Service Option 9 to the 6 Multiplex Sublayer 2-5 7 Table 2.3.2.2.2-1. F

35、undamental Data Block Types Supplied by the Multiplex Sublayer to 8 Service Option 9 . 2-6 9 Table 2.3.2.3.1-1. Fundamental Data Block Types Supplied by Service Option 30 to the 10 Multiplex Sublayer 2-7 11 Table 2.3.2.3.2-1. Supplemental Data Block Types Supplied by the Multiplex Sublayer to 12 Ser

36、vice Option 30 2-7 13 Table 2.3.2.4.1-1. Fundamental Data Block Types Supplied by Service Option 31 to the 14 Multiplex Sublayer 2-8 15 Table 2.3.2.4.2-1. Supplemental Data Block Types Supplied by the Multiplex Sublayer to 16 Service Option 31 2-9 17 Table 2.3.2.6.1-1. Fundamental Data Block Types S

37、upplied by Service Option 75 to the 18 Multiplex Sublayer 2-10 19 Table 2.3.2.6.2-1. Fundamental Data Block Types Supplied by the Multiplex Sublayer to 20 Service Option 75 2-11 21 Table 2.3.3.2.1-1. Valid Service Configuration Attributes for Service Option 2 . 2-13 22 Table 2.3.3.2.1-2. Valid Servi

38、ce Configuration Attributes for Service Option 9 . 2-13 23 Table 2.3.3.2.1-3. Valid Service Configuration Attributes for Service Option 30 . 2-14 24 Table 2.3.3.2.1-4. Valid Service Configuration Attributes for Service Option 31 . 2-14 25 Table 2.3.3.2.1-5. Valid Service Configuration Attributes for

39、 Service Option 55 . 2-15 26 Table 2.3.3.2.1-6. Valid Service Configuration Attributes for Service Option 75 . 2-15 27 Table 2.5.1-1. Service Option 2 or 9 Data Block Processing . 2-21 28 Table 2.5.1-2. Service Option 30 or 31 Data Block Processing . 2-22 29 Table 2.5.1-3. Service Option 75 Data Blo

40、ck Processing 2-22 30 Table 2.6.1-1 Receive Counters for the F-ACKCH 2-30 31 Table 2.6.4-1 CTL_REC_TYPE Codes . 2-32 32 Table 2.6.4.1-1 Type-specific Fields in a Service Option Control Message corresponding to 33 Control Directive for FCH 2-32 34 3GPP2 C.S0013-B v1.0 TABLES viii Table 2.6.4.2-1 Type

41、-specific Fields in a Service Option Control Message corresponding to 1 Control Directive for R-FCH 0 bps 2-33 2 Table 2.6.4.3-1 Type-specific Fields in a Service Option Control Message corresponding to 3 Control Directive for R-ACKCH1 . 2-33 4 Table 2.6.4.4-1. Type-specific Fields in a Service Opti

42、on Control Message corresponding to 5 Control Directive for F-ACKCH . 2-34 6 Table 2.6.4.5-1. Type-specific Fields in a Service Option Control Message used for Counter 7 Retrieval from the Mobile Station 2-34 8 Table 2.6.4.5-2. VECT_COUNTER_ID Codes . 2-35 9 Table 2.6.4.6-1. Type-specific Fields in

43、a Service Option Control Message corresponding to 10 Control Directive for R-ACKCH2 . 2-35 11 Table 2.6.5.1-1. Type-specific Fields in a Service Option Control Message corresponding to 12 F-ACKCH Receive Counters Response 2-36 13 14 15 3GPP2 C.S0013-B v1.0 FOREWORD ix (This foreword is not part of t

44、his Standard) 1 This Standard was prepared by Technical Specification Group C of the Third Generation 2 Partnership Project 2 (3GPP2). This Standard specifies procedures for the Loopback Service 3 Option (LSO) for cdma2000 Spread Spectrum Systems. 4 5 3GPP2 C.S0013-B v1.0 FOREWORD x This page intent

45、ionally left blank. 1 3GPP2 C.S0013-B v1.0 NOTES xi 1. “Base station” refers to the functions performed on the landline side, which are 1 typically distributed among a cell, a sector of a cell, and a mobile switching center. 2 2. This Standard uses the following verbal forms: “Shall” and “shall not”

46、 identify 3 requirements to be followed strictly to conform to the standard and from which no 4 deviation is permitted. “Should” and “should not” indicate that one of several 5 possibilities is recommended as particularly suitable, without mentioning or 6 excluding others; that a certain course of a

47、ction is preferred but not necessarily 7 required; or that (in the negative form) a certain possibility or course of action is 8 discouraged but not prohibited. “May” and “need not” indicate a course of action 9 permissible within the limits of the standard. “Can” and “cannot” are used for 10 statem

48、ents of possibility and capability, whether material, physical, or causal. 11 3. Unless indicated otherwise, this document presents numbers in decimal form. 12 Binary numbers are distinguished in the text by the use of single quotation marks. 13 14 15 3GPP2 C.S0013-B v1.0 NOTES xii This page intenti

49、onally left blank. 1 2 3 3GPP2 C.S0013-B v1.0 1-1 1 GENERAL 1 1.1 Scope 2 This Standard specifies procedures for the Loopback Service Option (LSO) for cdma2000 3 Spread Spectrum Systems. 4 1.2 Terms and Numeric Information 5 Base Station. A fixed station used for communicating with mobile stations. Depending 6 upon the context, the term base station may refer to a cell, a sector within a cell, or 7 another part of the wireless system. 8 Blank-and-burst. The preemption of the traffic in an entire traffic channel frame by 9 another form of traffic, typically signaling. 10 Data Block. The u