TIA-1112-2008 X S0050-0 v1 0 Session Initiation Protocol (SIP) to ISDN User Part (ISUP) Interworking《会话初始协议(SIP)到ISDN用户部分(ISUP)的互通》.pdf
《TIA-1112-2008 X S0050-0 v1 0 Session Initiation Protocol (SIP) to ISDN User Part (ISUP) Interworking《会话初始协议(SIP)到ISDN用户部分(ISUP)的互通》.pdf》由会员分享,可在线阅读,更多相关《TIA-1112-2008 X S0050-0 v1 0 Session Initiation Protocol (SIP) to ISDN User Part (ISUP) Interworking《会话初始协议(SIP)到ISDN用户部分(ISUP)的互通》.pdf(86页珍藏版)》请在麦多课文档分享上搜索。
1、 TIA-1112-2008 APPROVED: OCTOBER 1, 2008 REAFFIRMED: SEPTEMBER 19, 2013 TIA-1112 October 2008X.S0050-0 v1.0 Session Initiation Protocol (SIP) to ISDN User Part (ISUP) Interworking NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunder
2、standings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respe
3、ct preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and
4、Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not
5、 purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Pro
6、ject No. PN-3-0254-RF1, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development o
7、r any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and publ
8、ished pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims o
9、f IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures o
10、r practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standard
11、s (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of
12、any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of
13、 IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise i
14、nvestigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PU
15、RPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE,
16、RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONT
17、AINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY
18、OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. X.S0050-0 v1.0 i Session Initiation Protocol (SIP) to ISDN User P
19、art (ISUP) Interworking 1 Contents 2 List of Figures.vi 3 List of Tablesviii 4 Forewordx 5 1 Scope1 6 2 References1 7 3 Definitions and Abbreviations4 8 3.1 Definitions 4 9 3.2 Abbreviations4 10 4 General .5 11 4.1 General Interworking Overview .5 12 5 Network Characteristics .6 13 5.1 Key Character
20、istics of ISUP-based CS Networks 6 14 5.2 Key Characteristics of IM CN Subsystem 6 15 6 Interworking with CS Networks.6 16 6.1 Interworking Reference Model.6 17 6.1.1 Interworking Reference Points and Interfaces 6 18 6.1.2 Interworking Functional Entities 7 19 6.1.2.1 Void.7 20 6.1.2.2 Media Gateway
21、 Control Function (MGCF) 7 21 6.1.2.3 IP Multimedia - Media Gateway Function (IM-MGW) 7 22 6.2 Control Plane Interworking Model .7 23 6.3 User Plane Interworking Model7 24 7 Control Plane Interworking7 25 7.1 General .8 26 7.2 Interworking between CS Networks Supporting ISUP and the IM CN Subsystem8
22、 27 7.2.1 Services Performed by Network Entities in the Control Plane .8 28 7.2.1.1 Services Performed by the SS7 Signalling Function.8 29 7.2.1.2 Void.9 30 7.2.1.3 Services of the MGCF.9 31 7.2.1.4 Services of the SIP Signalling Function 9 32 7.2.2 Signalling Between Network Entities in the Control
23、 Plane 9 33 7.2.2.1 Signalling Between the SS7 Signalling Function and the MGCF .9 34 7.2.2.2 Signalling Between the MGCF and SIP Signalling Function9 35 7.2.3 SIP-ISUP protocol interworking.9 36 7.2.3.1 Incoming Call Interworking from SIP to ISUP at I-MGCF 9 37 X.S0050-0 v1.0 ii 7.2.3.1.1 Sending o
24、f IAM 9 1 7.2.3.1.2 Coding of the IAM10 2 7.2.3.1.2.1 Called Party Number 10 3 7.2.3.1.2.2 Nature of Connection Indicators.11 4 7.2.3.1.2.3 Forward Call Indicators11 5 7.2.3.1.2.4 Calling Partys Category.12 6 7.2.3.1.2.5 User Service Information12 7 7.2.3.1.2.6 Calling Party Number.14 8 7.2.3.1.2.7
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- TIA11122008XS00500V10SESSIONINITIATIONPROTOCOLSIPTOISDNUSERPARTISUPINTERWORKING 会话 初始 协议 SIP ISDN 用户

链接地址:http://www.mydoc123.com/p-1060077.html