TIA-1050 000-A-2011 cdma2000 Packet Data Services Wireless Local Area Network (WLAN) Interworking C List of Parts《Cdma2000分组数据服务 无线局域网(WLAN)互通 零件清单 修订版A》.pdf

《TIA-1050 000-A-2011 cdma2000 Packet Data Services Wireless Local Area Network (WLAN) Interworking C List of Parts《Cdma2000分组数据服务 无线局域网(WLAN)互通 零件清单 修订版A》.pdf》由会员分享，可在线阅读，更多相关《TIA-1050 000-A-2011 cdma2000 Packet Data Services Wireless Local Area Network (WLAN) Interworking C List of Parts《Cdma2000分组数据服务 无线局域网(WLAN)互通 零件清单 修订版A》.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、 TIA-1050.000-A October 2011cdma2000Packet Data Services: Wireless Local Area Network (WLAN) Interworking Revision A List of Parts NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, f

2、acilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from

3、manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance wit

4、h the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associate

5、d with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. 3-0174.000-RV1, formulated under the cog

6、nizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of co

7、ntents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed an

8、d called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussion

9、s of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual

10、have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specificati

11、on, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance re

12、lating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other

13、 SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any

14、claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINF

15、RINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFE

16、CTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY A

17、ND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY

18、 OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. X.S0028-000-A v1.0 Revision History: Revision Date Comments X.S0028-000-0 v1.0 March 2007 Initial publication X.S

19、0028-000-A v1.0 June 2008 Revision A publicaiton i Revision History: X.S0028-000-A v1.0 Contents 1 Introduction1 2 List of Parts 2 ii Revision History: X.S0028-000-A v1.0 List of Figures iii Revision History: X.S0028-000-A v1.0 List of Tables Table 1. List of Parts 2 iv Revision History: X.S0028-000

20、-A v1.0 Foreword (This foreword is not part of this Standard.) This document is subject to change following formal approval. Should this document be modified, it will be re-released with a change of release date and an identifying change in version number as follows: X.S0028-000-Z vy.z where: Z deno

21、tes revision 0, A, B, 0 is the initial release (0threvision) A is the first revision, B the second revision, etc v the letter “v” with no trailing space y is the “point release” number 0 is used when the document is first created 1 number is incremented whenever the document is approved for publicat

22、ion (e.g., 1 is the first approval by the plenary for publication) z is an internal edit level 0 internal edit level z, always reset to 0 when the document is approved for publication, 1 internal edit level is incremented by the entity (e.g., working group) that is developing the document. This docu

23、ment uses the following conventions: “Shall” and “shall not” identify requirements to be followed strictly to conform to this document and from which no deviation is permitted. “Should” and “should not” indicate that one of several possibilities is recommended as particularly suitable, without menti

24、oning or excluding others, that a certain course of action is preferred but not necessarily required, or that (in the negative form) a certain possibility or course of action is discouraged but not prohibited. “May” and “need not” indicate a course of action permissible within the limits of the docu

25、ment. “Can” and “cannot” are used for statements of possibility and capability, whether material, physical or causal. v Revision History: X.S0028-000-A v1.0 Scope This document is part of a multi-part document consisting of multiple parts that together describes cdma20001Wireless Local Area Network

26、Interworking. 1cdma2000 is the trademark for the technical nomenclature for certain specifications and standards of the Organizational Partners (OPs) of 3GPP2. Geographically (and as of the date of publication), cdma2000 is a registered trademark of the Telecommunications Industry Association (TIA-U

27、SA) in the United States. vi Revision History: X.S0028-000-A v1.0 1 Introduction This document is a multi-part document that describes cdma2000 Wireless Local Area Network Interworking. A multi-part document consists of a part 000, and at least one other part. Each part is subject to revision indepe

28、ndent of all other parts. This part, part 000, provides a list of parts that comprise a particular revision level. 1 1 0BIntroduction X.S0028-000-A v1.0 2 List of Parts The parts that comprise the initial release of this document are as follows: Title cdma2000 Packet Data Services; Wireless Local Ar

29、ea Network (WLAN) Interworking; List of Parts Revision A cdma2000 Packet Data Services; Wireless Local Area Network (WLAN) Interworking; Access to Internet cdma2000 Packet Data Services; Wireless Local Area Network (WLAN) Interworking; Access to Operator Services and Mobility Revision A Table 1. List of Parts 2 2 1BList of Parts