TIA-1046-2011 Signaling Conformance Test Specification for cdma2000 Data Services《cdma2000数据服务的信令一致性试验规范》.pdf

《TIA-1046-2011 Signaling Conformance Test Specification for cdma2000 Data Services《cdma2000数据服务的信令一致性试验规范》.pdf》由会员分享，可在线阅读，更多相关《TIA-1046-2011 Signaling Conformance Test Specification for cdma2000 Data Services《cdma2000数据服务的信令一致性试验规范》.pdf（192页珍藏版）》请在麦多课文档分享上搜索。

1、 TIA-1046 November 2011Signaling Conformance Test Specification for cdma2000Data Services NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improv

2、ement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not con

3、forming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institu

4、te (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulato

5、ry requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. 3-0166-1, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no

6、 assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of

7、intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from th

8、e holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which a

9、re instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Documen

10、t or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such

11、reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TI

12、As policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA

13、 of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the D

14、ocument. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROP

15、ERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE R

16、EFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQU

17、ENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAM

18、AGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-1046 i CONTENTS 1 Introduction.1-1 1.1 General Description.1-1 1.2 References.1-2 1.3 Definitions, Symbols and Abreviations1-3 1.4 Setup and Chanel conditio

19、ns.1-5 2 Asynchronous Data and Fax Services2-1 2.1 Send/Receive Fax.2-1 2.2 Upload/Download Binary File2-4 2.3 Simultaneous Two-way File Transfer/Carier Detect2-6 2.4 Compound AT Comand, Initialization and Conection Delay.2-8 2.5 Escaping to Comand Mode2-10 2.6 Air Interface Data Compresion2-12 2.7

20、RLP Operation in a Por RF Environment2-14 2.8 RLP Abort and TCP Retransmit Test2-16 2.9 Internet Control Mesage Protocol (ICMP) Requests/Replies2-18 3 Low Sped Packet Data.3-1 3.1 Forward File Transfer.3-1 3.2 Reverse File Transfer3-2 3.3 Bi-directional File Transfer.3-3 3.4 Mobile Station Packet Da

21、ta Inactivity Timer.3-4 3.5 Radio Link Protocol (RLP) Operation in Rayleigh Fading3-5 3.6 RLP Abort and Uper Layer Retransmit3-7 3.7 Zone-Based Registration for Packet Data Mobile Stations3-9 3.8 V-J Header Compresion3-10 3.9 Asynchronous Control Character Maping (ACM) Negotiation.3-1 3.10 PP Field

22、Compresion.3-12 3.1 Maximum Receive Unit (MRU)3-13 3.12 RLP Encryption Negotiation.3-14 3.13 Hardware Flow Control.3-15 4 Medium Sped Packet Data4-1 4.1 Forward File Transfer with Fundamental and Suplemental Code Chanels.4-1 4.2 Forward File Transfer with Variable Suplemental Code Chanels4-3 4.3 MSP

23、D Cal Setup, No Negotiation.4-5 4.4 MSPD Cal Setup, Negotiation to a Diferent MSPD Service Option.4-7 4.5 MSPD Cal Setup, Negotiation to LSPD4-9 4.6 MSPD Cal Setup, Mobile Station Maximum Multiplex Option Les than Base Station aximum Multiplex Option.4-1 TIA-1046 ii 4.7 MSPD Cal Setup, Mobile statio

24、n Maximum Multiplex Option Greater than Base Station Maximum ultiplex Option4-13 4.8 Alocation/De-alocation of Suplemental Code Chanels4-15 4.9 No Transmision on Suplemental Code Chanels4-18 4.10 Soft Handof with Suplemental Code Chanels4-20 4.1 Ading Suplemental Code Chanels during Soft Handof4-2 4

25、.12 Hard Handof to an MSPD-Capable System4-24 4.13 Bi-Directional File Transfers with Forward Suplemental Code Chanels.4-27 4.14 R! Interface Flow Control.4-29 4.15 Dormant Timer4-30 4.16 Packet Zone ID.4-32 4.17 RLP Operation in Rayleigh Fading Environment4-35 4.18 RLP Operation with Severely Degra

26、ded Chanel4-37 5 High Sped Packet Data.5-1 5.1 Forward File Transfer.5-1 5.2 Reverse File Transfer.5-3 5.3 Bi-directional File Transfer.5-5 5.4 Service Option Control Mesage Procesing.5-7 5.5 Changing Encoding Type on Suplemental Chanel during Hard Handof.5-10 5.6 Control Hold Mode Transitions5-14 5

27、.7 Soft Handof of Fundamental Chanel/Dedicated Control Chanel and Suplemental Chanels.5-19 5.8 Soft Handof of Fundamental Chanel or Dedicated Control Chanel only.5-23 5.9 Ading Suplemental Chanels during Soft Handof.5-26 5.10 Hard Handof during Data Transfer.5-28 5.1 Hard Handof to a diferent Radio

28、Configuration5-31 5.12 Mobile Station Packet Data Inactivity Timer.5-34 5.13 Mobile Station and Base Station Operating in Diferent States.5-35 5.14 RLP Operation in Rayleigh Fading Environment5-39 5.15 Release Order Procesing.5-41 5.16 Hysteresis Activation Timer.5-4 5.17 Hysteresis Timer5-45 5.18 B

29、asic Suplemental Chanel Configuration Seting and Single Asignment5-47 5.19 Turbo Coding on Suplemental Chanel.5-52 5.20 Corect Walsh Cover.5-54 5.21 Suplemental Chanel Discontinuous Transmision.5-56 5.2 Sloted Timer.5-58 5.23 Retry Order and Delay for Origination Mesage.5-61 5.24 Retry Order and Del

30、ay for Suplemental Chanel Request Mesages.5-63 5.25 Retry Order and Delay for Resource Request Mesages5-6 5.26 Mobile Station Aborts R-SCH.5-69 5.27 Mobile Station Originated Short Data Burst5-72 TIA-1046 iv 5.28 Mobile Station Terminated Short Data Burst5-74 5.29 Mobile Asisted Burst Operation Para

31、meters Mesage Test5-76 5.30 Base Station Ignores Mobile Station Requested Mode Transitions5-79 5.31 Mobile station Multiplex Option diferent from Base Station Multiplex Option.5-81 5.32 Hard Handof from MSPD to HSPD5-83 5.3 Hard Handof from LSPD to HSPD.5-85 6 ANEX A6-1 6.1 Figures6-1 7 ANEX B Data

32、Services Tests.7-1 7.1 References.7-1 7.2 Description of Compresible Test Data Files.7-1 7.3 Standard ITU Fax Pages.7-2 7.4 Test Files7-2 TIA-1046 v LIST OF FIGURES Figure “5-1 Cal Flow for base station initiated Active to Control Hold Transition.5-14 Figure “5-2 Cal Flow for mobile station initiate

33、d Active to Control Hold Transition.5-15 Figure “5-3 Cal Flow for base station initiated Control Hold to Active Transition.5-15 Figure “5-4 Cal Flow for mobile station initiated Control Hold to Active Transition.5-16 Figure “5-5 Cal Flow ithout Seting Up Trafic Chanel (Prefered Implementation).5-36

34、Figure “5-6 Cal Flow ith Seting Up Trafic Chanel (Alternate Implementation).5-37 Figure “5-7 Suplemental Chanel Asignments for overlaped burst periodEror! Bokmark not defined. Figure “5-8 Suplemental Chanel Asignments for disjoint burst periodsEror! Bokmark not defined. Figure “5-9 Suplemental Chane

35、l Asignments for asignment overwriteEror! Bokmark not defined. Figure “5-10 Reference Cal Flow for Sloted Timer Testing5-58 Figure “5-1 Reference Cal Flow for Retry Order and Delay Test (Origination Mesage).5-61 Figure “5-12 Reference Cal Flow for Retry Order and Delay Test (Suplemental Chanel Reque

36、st Mesages) 5-63 Figure “5-13 Reference Cal Flow for Retry Order and Delay Test (Resource Request Mesages).5-6 Figure “6-1 Single Base Station with Chanel Simulator.6-1 Figure “6-2 Two base stations with Chanel Simulator6-2 Figure “6-3 Single Base Station.6-3 Figure “6-4 Thre Base Stations.6-4 Figur

37、e “6-5 Two base stations.6-5 Figure “6-6 Single Base Station with TE2.6-6 Figure “6-7 Test Setup for RLP Abort in Forward Link.6-6 Figure “6-8 Test Setup for RLP Abort in Reverse Link6-7 Figure “6-9 Multiple Base Station and Mobile station.6-7 Figure “6-10 Single Base Station with AWGN Source6-8 Fig

38、ure “6-1 Single Base Station with Reverse Link Chanel Simulator.6-8 TIA-1046 vi LIST OF TABLES Table “2-1 Compresion Test Configurations2-13 Table “5-1 SCH Data Rate5-2 Table “5-2 Soft Handof Parameters5-20 Table “5-3 Hard Handof Parameters.5-29 Table “5-4 Sloted Timer Test Signal Chanel Levels5-59

39、Table “5-5 Test Parameters.5-70 Table “5-6 Test Parameters.5-7 Table 7 File Sizes for Data Testing.7-3 TIA-1046 vi FOREWORD (This foreword is not part of this Standard.) This Specification was prepared by Technical Specification Group C of the Third Generation Partnership Project 2 (3GP2). This Spec

40、ification is the first revision of the document and tests the signaling conformance requirements of the C.S017-A (Data Service Options for Spread Spectrum Systems) group of specifications. Other signaling conformance specifications such as C.S043-0 (Signaling Conformance Test Specification for cdma2

41、00Spread Spectrum Systems) do not cover Data Services signaling conformance tests. SCOPE The objective of these tests is to demonstrate mobile station or base station compliance to Data Services mesaging and protocol requirements in the cdma200 family of standards, with emphasis on reference 1, indi

42、cated in the Traceability sections of each test case. This standard does not adres al posible test cases.1“cdma200is the trademark for the technical nomenclature for certain specifications and standards of the Organizational Partners (OPs) of 3GP2. Geographicaly (and as of the date of publication),

43、cdma200 is a registered trademark of the Telecomunications Industry Asociation (TIA-USA) in the United States.” TIA-1046 1-1 1 Introduction 1.1 General Description This specification defines Data Services signaling conformance tests for CDMA base stations and mobile stations. In this document, mobil

44、e station refers to a subscriber terminal, handset, PDA, wireles local lop unit, or any other subscriber terminal that comunicates with the base station at the air interface. Base station refers to the composite functionality of the base station and conected network elements or emulators. Execution

45、Strategy: Separate signaling conformance tests are specified for mobile stations and base stations. Tests are typicaly performed using an emulator to interface with the unit under test, with a cabled conection for the RF interface. Any test should be executed only if unit under test suports corespon

46、ding feature. TIA-1046 1-2 1.2 References 1.2.1 Normative References The folowing standards are referenced in this text. At the time of publication, the editions indicated were valid. Al standards are subject to revision, and parties to agrements based on this standard are encouraged to investigate

47、the posibility of aplying the most recent editions of the standards indicated below. ANSI and TIA maintain registers of curently valid national standards published by them. 1 TIA-707.3-A, Data Service Options for Spread Spectrum Systems: AT Comand Procesing and the Rm Interface 2 TIA-707.4-A, Data S

48、ervice Options for Spread Spectrum Systems: Async Data and Fax Services 3 TIA-707.5-A, Data Service Options for Spread Spectrum Systems: Packet Data Services 4 TIA-707.7-A, Data Service Options for Spread Spectrum Systems: Analog Fax Service 5 TIA-707.8-0, Data Service Options for Spread Spectrum Sy

49、stems: Radio Link Protocol Type 2 6 TIA-707.9-A, Data Service Options for Spread Spectrum Systems: High Sped Packet Data Services 7 TIA-707.10-A, Data Service Options for Spread Spectrum Systems: Radio Link Protocol Type 3 8 TIA-200.5-D, Uper Layer (Layer 3) Signaling Standard for cdma200 Spread Spectrum Systems 9 TIA-707.12-A, Data Service Options for Spread Spectrum Systems: Service Options 3 and 6 10 TSB-58-G, Administration of Parameter Value Asignments for Spread Spectrum Standards INFORMATIVE REFERENCE 1 IETF, RFC 132 PP Internet Protocol Control P