TIA-1040 2 01-2005 Regenerative Satellite Mesh-A (RMS-A) Air Interface - MAC SLC Layer Specification - Part 1 General Description《(RMS-A)空中接口 MAC SLC层规范-第1部分 总描述》.pdf

《TIA-1040 2 01-2005 Regenerative Satellite Mesh-A (RMS-A) Air Interface - MAC SLC Layer Specification - Part 1 General Description《(RMS-A)空中接口 MAC SLC层规范-第1部分 总描述》.pdf》由会员分享，可在线阅读，更多相关《TIA-1040 2 01-2005 Regenerative Satellite Mesh-A (RMS-A) Air Interface - MAC SLC Layer Specification - Part 1 General Description《(RMS-A)空中接口 MAC SLC层规范-第1部分 总描述》.pdf（28页珍藏版）》请在麦多课文档分享上搜索。

1、 TIA STANDARD Regenerative Satellite Mesh-A (RMS-A) Air Interface - MAC/SLC Layer Specification - Part 1: General Description TIA-1040.2.01 April 2005 TELECOMMUNICATIONS INDUSTRY ASSOCIATION The Telecommunications Industry Association represents the communications sector of NOTICE TIA Engineering St

2、andards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for

3、 their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude

4、 their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume

5、any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health p

6、ractices and to determine the applicability of regulatory limitations before its use. (From Standards Proposal No. 3-0160.2.01, formulated under the cognizance of the TIA TR-34 Committee on Satellite Equipment and Systems). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technolog

7、y Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) or search onli

8、ne at http:/www.tiaonline.org/standards/search_n_order.cfm All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. Th

9、is document contains significant portions of material copied from ETSI document number TS 102188-5v112. The copyright on the ETSI document is owned by the European Telecommunication Standards Institute, which has granted a license for reproduction for use by TIA and its Engineering Committees and Su

10、bcommittees. Any copies of the above-mentioned ETSI document(s) required for other purposes should be purchased directly from ETSI or other organizations with a sales agreement covering ETSI publications. For copyright permission to reproduce portions of this document, please contact the TIA Standar

11、ds Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/about/faqDetail.cfm?id=18 OR Telecommunications Industry Association Standards (b) there is no assurance that the Document will be approved by any Comm

12、ittee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending o

13、r issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the

14、 Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opi

15、ne or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. TIA does not enforce or monitor compli

16、ance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES C

17、ONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO RE

18、PRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AN

19、D ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED U

20、PON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA

21、WITHOUT SUCH LIMITATIONS. TIA 1040.2.01 1Contents Intellectual Property Rights5 Foreword 5 1 Scope6 2 References 6 3 Definitions and abbreviations.7 3.1 Definitions. 7 3.2 Abbreviations 7 4 Network definition and protocol architecture 8 4.1 Regenerative Satellite Mesh - A network architecture. 8 4.1

22、.1 Network elements 8 4.1.2 Network interfaces 9 4.2 ST functional description 9 4.2.1 Network access control functions . 9 4.2.2 Packet routing and transfer functions . 9 4.2.3 Radio Resource Management functions . 10 4.2.4 Network management functions . 10 4.3 ST operational states . 10 4.3.1 ST l

23、evel states 10 4.3.1.1 ST state description . 10 4.3.1.2 State transitions relative to system information reception 12 4.3.1.3 ST transmission barring. 12 4.3.2 Port level states 14 4.3.2.1 State description 14 4.3.2.2 Port level services 14 4.4 ST protocol architecture 15 4.4.1 Data plane architect

24、ure 15 4.4.2 CoS and related concepts 15 4.5 Layer-wise functional partitioning . 17 4.5.1 Data link layer . 17 4.5.1.1 Satellite Link Control sublayer . 17 4.5.1.2 Satellite Medium Access Control sublayer. 17 4.5.2 Physical layer. 18 4.6 Procedure definitions 18 4.6.1 Procedures in idle mode 18 4.6

25、.1.1 System information reception . 18 4.6.1.2 Transfer and reception of management traffic 18 4.6.1.3 SLC session initiation on destination side 19 4.6.2 Procedures - transmission side 19 4.6.2.1 Address resolution . 19 4.6.2.2 Connection setup, modification, and release 19 4.6.2.3 Segmentation and

26、 packetization 19 4.6.2.4 Satellite Link Control session setup and teardown. 19 4.6.2.5 Bandwidth management - resource allocation and queue management 20 4.6.2.5.1 Rate transmissions . 20 4.6.2.5.2 Volume oriented uplink data channels 20 4.6.2.5.3 Contention mode access 20 4.6.2.5.4 Persistent aloh

27、a 20 4.6.3 Procedures - reception side . 20 4.6.3.1 Connection setup . 20 4.6.3.2 Session initiation 20 4.6.3.3 Reassembly 21 4.6.4 Power control 21 TIA 1040.2.01 24.7 Security Access Module - functional description 21 4.8 ST types. 22 Annex A (informative): Bibliography.23 History 24 TIA 1040.2.01

28、3Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Propert

29、y Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, includ

30、ing IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has

31、 been produced by ETSI Technical Committee Satellite Earth Stations and Systems (SES). The present document is part 1 of a multi-part deliverable covering Regenerative Satellite Mesh - A (RSM-A) air interface SMAC/SLC layer specification, as identified below: Part 1: “General description“; Part 2: “

32、Satellite Medium Access Control and Satellite Link Control detailed specification“; Part 3: “ST-SAM Interface specification“. TIA 1040.2.01 41 Scope The present document is an introduction to the SMAC/SLC layer specification for the TC-SES BSM Regenerative Satellite Mesh - A (RSM-A) air interface fa

33、mily. In particular it contains the description of the overall network and SMAC/SLC protocol architecture of the BSM Regenerative Satellite Mesh - A (RSM-A) air interface as seen from the ST. It also describes the various interfaces between the ST and other network elements and the relation between

34、the layers in the ST logical protocol architecture as are discussed in the present document as well as the interactions with other layers in the BSM Regenerative Satellite Mesh - A (RSM-A) protocol architecture. 2 References The following documents contain provisions which, through reference in this

35、 text, constitute provisions of the present document. References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. Ref

36、erenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. 1 ETSI TS 102 188-1: “Satellite Earth Stations and Systems (SES); Regenerative Satellite Mesh - A (RSM-A) air interface; Physical layer specification; Part 1: Ge

37、neral description“. 2 ETSI TS 102 188-5: “Satellite Earth Stations and Systems (SES); Regenerative Satellite Mesh - A (RSM-A) air interface; Physical layer specification; Part 5: Radio transmission and reception“. 3 ETSI TS 102 189-2: “Satellite Earth Stations and Systems (SES); Regenerative Satelli

38、te Mesh - A (RSM-A); SMAC/SLC layer specification; Part 2: Satellite Medium Access Control and Satellite Link Control detailed specification“. 4 ETSI TR 101 984: “Satellite Earth Stations and Systems (SES); Broadband Satellite Multimedia; Services and Architectures“. 5 ETSI TS 102 189-3: “Satellite

39、Earth Stations and Systems (SES); Regenerative Satellite Mesh - A (RSM-A); SMAC/SLC layer specification; Part 3: ST-SAM Interface specification“. 6 ETSI TS 102 188-2: “Satellite Earth Stations and Systems (SES); Regenerative Satellite Mesh - A (RSM-A) air interface; Physical layer specification; Par

40、t 2: Frame structure“. 7 ETSI TS 102 188-3: “Satellite Earth Stations and Systems (SES); Regenerative Satellite Mesh - A (RSM-A) air interface; Physical layer specification; Part 3: Channel coding“. 8 ETSI TS 102 188-4: “Satellite Earth Stations and Systems (SES); Regenerative Satellite Mesh - A (RS

41、M-A) air interface; Physical layer specification; Part 4: Modulation“. 9 ETSI TS 102 188-6: “Satellite Earth Stations and Systems (SES); Regenerative Satellite Mesh - A (RSM-A) air interface; Physical layer specification; Part 6: Radio link control“. 10 ETSI TS 102 188-7: “Satellite Earth Stations a

42、nd Systems (SES); Regenerative Satellite Mesh - A (RSM-A) air interface; Physical layer specification; Part 7: Synchronization“. TIA 1040.2.01 53 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: Network Operations Cont

43、rol Centre (NOCC): centre that controls the access of the satellite terminal to an IP network and also provides element management functions and control of the address resolution and resource management functionality satellite payload: part of the satellite that provides air interface functions NOTE

44、: The satellite payload operates as a packet switch that provides direct unicast and multicast communication between STs at the link layer. Satellite Terminal (ST): terminal that is installed in the user premises terrestrial host: entity on which application level programs are running NOTE: It may b

45、e connected directly to the Satellite Terminal or through one or more networks. 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: ACF Access Control Field ARP Address Resolution Protocol BoD Bandwidth-on-Demand BSM Broadband Satellite Multimedia CoS Class

46、 of Service CRC Cyclic Redundancy Check ESN Equipment Serial Number GEO Geosynchronous Earth Orbit HVUL High Volume UpLinkIP Internet Protocol LLDC Link Layer Data Confidentiality MAC Medium Access Control MIP Management Information Packet NIP Network Information Packet NOCC Network Operations Contr

47、ol Centre O substate = ACTIVE). MAINTENANCE: The ST port goes into this state on direct command from the NOCC. In this state it can still do connection setup/teardown, routing etc, but is prohibited from advertising these services to the local networks or to other STs. This state is to be used for d

48、iagnostic purposes only. OUT-OF-SERVICE: An ST port goes into out-of-service state when the ST overall goes out of the active state or into one of the inactive substates of the active state or due to failure/deconfiguration of the port itself. In this state, the ST does not provide any services to e

49、ither a local user or a remote ST. 4.3.2.2 Port level services Packet transit: The service of delivering packets over the RSM-A system to other networks with/without QoS guarantees. Routing: The service of identifying routes available over the RSM-A system and advertising them locally. Interaction with terrestrial routing protocols to allow seamless IP routing over the RSM-A system. Connection setup: The service of setting up pre-scheduled/on-demand connections providing “virtual circuit-like“ channels over the RSM-A system by negotiating with the