TIA-1009-2006 ME Personalization Mechanism for cdma2000 Spread Spectrum Systems《CDMA2000扩频系统地个性化机制》.pdf

《TIA-1009-2006 ME Personalization Mechanism for cdma2000 Spread Spectrum Systems《CDMA2000扩频系统地个性化机制》.pdf》由会员分享，可在线阅读，更多相关《TIA-1009-2006 ME Personalization Mechanism for cdma2000 Spread Spectrum Systems《CDMA2000扩频系统地个性化机制》.pdf（58页珍藏版）》请在麦多课文档分享上搜索。

1、 TIA STANDARD ME Personalization Mechanism for cdma2000 Spread Spectrum Systems TIA-1009 October 2006 TELECOMMUNICATIONS INDUSTRY ASSOCIATION Representing the telecommunications industry in association with the Electronic Industries Alliance NOTICE TIA Engineering Standards and Publications are desi

2、gned to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The exist

3、ence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA m

4、embers, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to partie

5、s adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the app

6、licability of regulatory limitations before its use. (From Project No. 3-0110, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amen

7、ded, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investi

8、gation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate

9、 or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminato

10、ry. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in

11、the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty

12、 or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applicat

13、ions shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Docum

14、ent. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTE

15、NTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDIN

16、G THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, A

17、RISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WA

18、RRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-1009 i

19、 CONTENTS 1 1 INTRODUCTION 1 2 2 REFERENCES .3 3 3 DEFINITIONS AND ABBREVIATIONS.5 4 3.1 Definitions.5 5 3.2 Abbreviations 6 6 4 GENERAL FEATURE DESCRIPTION 9 7 5 NETWORK PERSONALIZATION .13 8 5.1 Network Type 1 personalization for CDMA 1x ME 13 9 5.1.1 Operation of a Network Type 1 personalized ME.

20、13 10 5.1.2 Network Type 1 personalization cycle .14 11 5.2 Network Type 2 personalization for CDMA 1x ME 15 12 5.2.1 Operation of Network Type 2 personalized ME15 13 5.2.2 Network Type 2 personalization cycle .16 14 5.3 Network personalization for HRPD terminal.17 15 5.3.1 Operation of HRPD Network

21、 personalized ME.17 16 5.3.2 HRPD Network personalization cycle 18 17 6 SERVICE PROVIDER PERSONALIZATION21 18 6.1 Operation of SP personalized MEs .21 19 6.2 SP personalization cycle 22 20 6.2.1 Personalization cycle22 21 6.2.2 De-personalization cycle.22 22 7 CORPORATE PERSONALIZATION25 23 7.1 Oper

22、ation of corporate personalized MEs.25 24 7.2 Corporate personalization cycle .26 25 7.2.1 Personalization cycle26 26 7.2.2 De-personalization cycle.26 27 8 R-UIM PERSONALIZATION 29 28 8.1 Operation of R-UIM personalized ME .29 29 8.2 R-UIM personalization cycle.30 30 8.2.1 Personalization cycle30 3

23、1 8.2.2 De-personalization cycle.31 32 TIA-1009 ii 9 OVER THE AIR DE-PERSONALIZATION CYCLE.33 1 10 DISABLE PERSONALIZATION35 2 11 MANUFACTURER PERSONALIZATION AND DE-PERSONALIZATION.37 3 12 AUTOMATIC PERSONALIZATION.39 4 13 PERSONALIZATION CYCLE RESTRICTIONS 41 5 14 SECURITY .43 6 ANNEX A (NORMATIVE

24、): TECHNICAL INFORMATION.45 7 TIA-1009 iii 1 TABLES 2 Table 4-1: Codes used by each personalization category for CDMA 1x 10 3 Table 4-2: Codes used by each personalization category for HRPD . 10 4 Table 4-3: Codes used by each personalization category for HAT 11 5 6 TIA-1009 iv No text.1 TIA-1009 1

25、1 1 INTRODUCTION 2 This document defines the ME Personalization feature. The ME Personalization feature will 3 allow operators to protect their investments in MEs by restricting the ME to operate with an R-4 UIM containing specific personalization parameters. In effect, the ME Personalization featur

26、e 5 allows operators the ability to “lock” a handset (ME mobile equipment) to a particular R-UIM 6 or set of R-UIMs. The locking feature works by storing personalization information in the ME 7 that limits the R-UIMs with which it will work and by checking this information against the R-8 UIM upon p

27、ower up or insertion of an R-UIM. 9 TIA-1009 2 No text. 1 TIA-1009 3 1 2 REFERENCES 2 The following standards are referenced in this text. At the time of publication, the editions 3 indicated were valid. All standards are subject to revision, and parties to agreements based 4 upon this document are

28、encouraged to investigate the possibility of applying the most recent 5 editions of the standards indicated below. ANSI and TIA maintain registers of currently valid 6 national standards published by them. 7 1. ETSI TS 122 022 v5.0.0, “3rdGeneration Partnership Project; Technical Specification Group

29、 8 Services and System Aspects; Personalisation of Mobile Equipment (ME); Mobile functionality 9 specification”, September 2002. 10 2. TIA-2000.5-D, Upper Layer (Layer 3) Signaling Standard for cdma2000 Spread Spectrum 11 Systems, March 2004. 12 3. ETSI TS 131 102, “Third Generation Partnership Proj

30、ect; Technical Specification Group 13 Terminals; Characteristics of the USIM application”, (Release 6) 14 4. TIA-820-C, Removable User Identity Module for Spread Spectrum Systems, April 2006. 15 5. Reserved. 16 6. TIA-637-C, Short Message Service for Wideband Spread Spectrum Systems, May 2004. 17 7.

31、 C.S0035-A, CDMA Card Application Toolkit, February 2005. 18 8. TIA-856-A, cdma2000 High Rate Packet Data Air Interface Specification, March 2004. 19 9. TIA-683-D, Over-the-Air Service Provisioning of Mobile Stations in Spread Spectrum Systems, 20 October 2004. 21 22 TIA-1009 4 No text. 1 TIA-1009 5

32、 3 DEFINITIONS AND ABBREVIATIONS 1 The terms and abbreviations used within this specification are defined as follows: 2 3.1 Definitions 3 4 Corporate code. A code which when combined with a network (Type 1 or Type 2) and SP codes 5 refers to a unique Corporation. The code is provided in the GID2 fil

33、e on the R-UIM (see Annex 6 A.1.) and is correspondingly stored on the ME. 7 8 Corporate code group. Combination of the Corporate code and the associated SP and network 9 codes. 10 11 Corporate personalization. Allows a corporate customer to personalize MEs that he provides 12 for his employees or c

34、ustomers use so that they can only be used with the companys own R-13 UIMs. 14 15 De-personalization. Is the process of deactivating the personalization so that the ME ceases to 16 carry out the verification checks. 17 18 HAT. An access terminal supporting both CDMA 1x and HRPD technologies. 19 20 H

35、RPD Network code(s). REALM part of the NAI. 21 22 HRPD Network personalization. Allows the network operator to personalize a ME so that it 23 can only be used with that particular HRPD network operators R-UIMs. HRPD Network 24 personalization is based on the REALM part of the NAI. 25 26 IMSI. Can be

36、 either an IMSI_M (MIN based IMSI) or an IMSI_T (True IMSI) in the context of this 27 specification. 28 29 Mobile Station. In the context of this specification, a mobile station consists of two parts ME 30 and R-UIM. 31 32 NAI. HRPD Network Access Identifier, as defined in 9 Section 3.5.8.13. 33 34

37、Network Type 1 code. A decimal value of MCC and MNC of the IMSI_M or IMSI_T. 35 36 Network Type 1 personalization. Allows the network operator to personalize a ME so that it 37 can only be used with that particular network operators R-UIMs. Network Type 1 38 personalization is based on MCC and MNC.

38、39 40 Network Type 2 code, or IRM code. The first 4 digits of the decimal value of the IRM based 41 MIN of the IMSI_M. 42 43 Network Type 2 personalization. Allows the network operator to personalize a ME so that it 44 can only be used with that particular network operators R-UIMs. Network Type 2 45

39、 personalization is based on the 4 Most Significant Digits of the IRM based MIN. 46 47 Normal mode of operation. Is the mode of operation into which the ME would have gone if it 48 had no personalization checks to process. 49 50 Personalization category. Network Type 1, Network Type 2, SP, Corporati

40、on or R-UIM to 51 which the ME is personalized. 52 53 TIA-1009 6 Personalization. Is the process of storing information in the ME and activating the procedures 1 which verify this information against the corresponding information stored in the R-UIM 2 whenever the ME is powered up or an R-UIM is ins

41、erted, in order to limit the R-UIMs with 3 which the ME will operate. 4 REALM. The realm part of NAI, as defined in 9 Section 3.5.8.13. 5 6 R-UIM code. A code which when combined with Network Type 1 and Network Type 2 codes 7 refers to a unique R-UIM. 8 9 R-UIM code group. A combination of the R-UIM

42、 code and the associated network codes (it is 10 equivalent to the IMSI_M or IMSI_T). 11 12 R-UIM personalization. Enables a user to personalize a ME so that it may only be used with 13 particular R-UIM(s). 14 15 SP code. A code which when combined with a network (Type 1 or Type 2) code refers to a

43、16 unique SP. The code is provided in the GID1 file on the R-UIM (see Annex A.1.) and is 17 correspondingly stored on the ME. 18 19 SP code group. A combination of the SP code and the associated network code. 20 21 SP personalization. Allows the service provider to personalize a ME so that it can on

44、ly be used 22 with that particular service providers R-UIMs. 23 24 User. Normally refers to the person performing the personalization or de-personalization 25 operations and may represent a network operator, service provider, or manufacturer of the 26 user/owner of the handset, depending on the cont

45、ext. 27 28 3.2 Abbreviations 29 CCK. Corporate Control Key. 30 CNL. Co-operative Network List. 31 DF. Directory File. 32 EF. Elementary File. 33 GID1. Group Identifier (level 1). 34 GID2. Group Identifier (level 2). 35 HAT. Hybrid Access Terminal. 36 HNCK. HRPD Network Control Key. 37 IMSI. Internat

46、ional Mobile Subscriber Identity. 38 IRM. International Roaming MIN. 39 MCC. Mobile Country Code. 40 ME. Mobile Equipment. 41 MIN. Mobile Identification Number. 42 MNC. Mobile Network Code. 43 TIA-1009 7 MS. Mobile Station. 1 MSIN. Mobile Station Identification Number (2 2.3.1) 2 NAI. Network Access

47、 Identifier. 3 NCK1. Network Type 1 Control Key. 4 NCK2. Network Type 2 Control Key. 5 PCK. Personalization Control Key. 6 R-UIM. Removable User Identity Module. 7 SMS-PP. SMS Point-to-Point. 8 SPCK. Service Provider Control Key. 9 TIA-1009 8 No text. 1 TIA-1009 9 1 4 GENERAL FEATURE DESCRIPTION 2 T

48、he ME R-UIM locking mechanism provides subsidy protection to operators by limiting the R-3 UIMs that will operate with their MEs. The locking feature works by storing personalization 4 information in the ME that limits the R-UIMs with which it will work and by checking this 5 information against the

49、 R-UIM upon power up or insertion of an R-UIM. When the ME detects 6 an R-UIM with parameters differing from its own, it will enter a “limited service state” with only 7 emergency calls available. 8 ME personalization linked to the CDMA locking mechanism applies independently from other 9 ME personalization mechanisms related to other network access technologies (e.g. 3GPP 10 locking as defined in 1). An ME supporting multiple Network Access Technologies may provide 11 ME personalization features independently for each technology1. These fields would then be 12 matched