TIA TSB-179-A-2018 Terrestrial Land Mobile Radio C Antenna Systems C Total Antenna System Return Loss Measurements.pdf

《TIA TSB-179-A-2018 Terrestrial Land Mobile Radio C Antenna Systems C Total Antenna System Return Loss Measurements.pdf》由会员分享，可在线阅读，更多相关《TIA TSB-179-A-2018 Terrestrial Land Mobile Radio C Antenna Systems C Total Antenna System Return Loss Measurements.pdf（32页珍藏版）》请在麦多课文档分享上搜索。

1、 TSB-179-A May 2018 Terrestrial Land Mobile Radio Antenna Systems Total “Antenna System” Return Loss Measurements NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating inter

2、changeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or

3、selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards, Publications and Bulletins are adopted by TIA in accordance with the

4、American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard, Publication or Bulletin. Bulletins are not published in accordance with ANSI procedures and

5、are informative documents. Technical Bulletins are distinguished from TIA Standards or Interim Standards, in that they contain a compilation of engineering data or information useful to the technical community, and represent approaches to good engineering practices that are suggested by the formulat

6、ing committee. This Bulletin is not intended to preclude or discourage other approaches that similarly represent good engineering practice, or that may be acceptable to, or have been accepted by, appropriate bodies. Parties who wish to bring other approaches to the attention of the formulating commi

7、ttee to be considered for inclusion in future revisions of this Bulletin are encouraged to do so. It is the intention of the formulating committee to revise and update this Bulletin from time to time as may be occasioned by changes in technology, industry practice, or government regulations, or for

8、other appropriate reasons. This Bulletin does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Bulletin to establish appropriate safety and health practices and to determine the applicability of

9、 regulatory limitations before its use. Any use of trademarks in this document are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. X-XXX-XX, formulated under the cognizance of the TIA TR-XX (“Committ

10、ee Title”), TR-XX Subcommittee on (“Subcommittee Title”) ). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Technology (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modifi

11、ed or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for

12、IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire

13、 into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA doe

14、s not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formula

15、tion, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligat

16、ion to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall

17、apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA do

18、es not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FI

19、TNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTE

20、NTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM

21、 OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TOR

22、T (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-PN-179-A TO BE PU

23、BLISHED AS TSB-179-A i TABLE OF CONTENTS DOCUMENT REVISION HISTORY ii FOREWORD . iii Patent Identification . iv INTRODUCTION . v 1.0 SCOPE . 1 2.0 BACKGROUND 2 3.0 DEFINITIONS AND ABBREVIATIONS . 3 4.0 SYSTEM VSWR ESTIMATION TOOLS . 4 4.1 Naval Electronic Warfare Handbook . 4 4.2 Early Calculation o

24、f System Return Loss 5 4.3 Improved System Return Loss Calculation Method 6 4.4 Latest System Return Loss Spreadsheet Calculator 8 4.5 Tower Mounted Amplifier Example . 14 5.0 CONCLUSION 15 BIBLIOGRAPHY 16 TABLE OF FIGURES Figure 1 Reduction of VSWR by Attenuation 4 Figure 2 System VSWR Calculator,

25、Perfect Main Feed Line (1.000:1 VSWR) . 9 Figure 3 System VSWR Calculator, Typical Main Feed Line (1.11:1 VSWR) 10 Figure 4 Section 4.3 Example using last version of Spreadsheet Calculator . 11 Figure 5 Newest version of standalone calculation . 12 Figure 6 Expanded view to reveal all steps calculat

26、ed 13 TABLE OF TABLES Table 1 Example comparisons . 11 TIA-PN-179-A TO BE PUBLISHED AS TSB-179-A ii DOCUMENT REVISION HISTORY Version Date Description TSB-179 October, 2003 Original Issue TSB-179-1 July, 2004 Error Corrections TSB-179-A Incorporated TSB-179-1 TSB-179-A iii FOREWORD (This foreword is

27、 not part of this Bulletin) This Bulletin was prepared by TIA Working Group TR-8.11.5 and was approved by TIA Engineering Subcommittee TR-8.11. This document includes no Annexes. The source of much of this Bulletin is acknowledged to be originally from Andrew Corporation which has been acquired by C

28、ommScope. . TIA-PN-179-A TO BE PUBLISHED AS TSB-179-A iv Patent Identification The readers attention is called to the possibility that using this document might necessitate the use of one or more inventions covered by patent rights. By publication of this document no position is taken with respect t

29、o the validity of those claims or any patent rights in connection therewith. The patent holders so far identified have, we believe, filed statements of willingness to grant licenses under those rights on reasonable and nondiscriminatory terms and conditions to applicants desiring to obtain such lice

30、nses. The following patent holders and patents have been identified in accordance with the TIA intellectual property rights policy: None identified TIA is not responsible for identifying patents for which licenses might be referenced by this document or for conducting inquiries into the legal validi

31、ty or scope of those patents that are brought to its attention. TSB-179-A v INTRODUCTION Return Loss or VSWR sweeps taken at the bottom end of the transmission line are used by systems operators and contractors to determine the condition of the complete RF path including the antenna. For many years,

32、 this RF path consisted of the main transmission line, jumper cables and an antenna. Several calculators were developed to estimate what the expected return loss or VSWR ought to be if all components were meeting specification. Since the antenna was by far the component with the highest VSWR, out-of

33、-specification readings at the bottom end often could be traced to an out-of-specification antenna. However, with the advent of more complex systems incorporating additional devices such as Tower Mounted Amplifiers and Diplexers, the antenna is no longer the only major VSWR contributor in the RF pat

34、h. This Bulletin addresses the issues associated with measuring the complete RF path and offers some suggestions about how to make more meaningful measurements. TSB-179-A 1 Terrestrial Land Mobile Radio - Antenna Systems - Total “Antenna System” Return Loss Measurements 1.0 SCOPE In the land mobile

35、radio service there has historically been no clear relationship between the VSWR specifications of the individual components in the RF path and the expected resultant “system” VSWR at the bottom end of the transmission line. This makes it difficult, at best, for system operators to set a realistic s

36、et of measurement expectations for installers and technicians to use for checking completed installations Various calculators and nomographs have been developed over the years to try to estimate what the expected system VSWR ought to be for the total RF path, but, at best they treat the combination

37、of the individual component VSWR vectors as if they combine in a random fashion. This might be true most of the time, but there might be those instances where random vector combinations do not happen. This Bulletin presents some of the nomographs and calculators that have been employed over the year

38、s and introduces an improved calculator that shows both typical and worst case vector summation. It also presents some theoretical reference material detailing how the VSWRs of specific components might combine. 1. The use of manufacturers names is not an endorsement, rather an acknowledgement to th

39、e source of the material in this Bulletin. TIA-PN-179-A TO BE PUBLISHED AS TSB-179-A 2 2.0 BACKGROUND The terms Voltage Standing Wave Ratio (VSWR), Return Loss (RL), Reflection Coefficient () and Mismatch Loss are all terms used to define the amount of mismatch between an RF source and an RF load; h

40、ence they are a measure of the efficiency of the RF transmission system. They are all mathematically related and can be easily converted using the equations in 3.0,2. Some of the earliest information used for estimating the total system VSWR from the bottom end of the transmission line was presented

41、 as a simple nomograph. Later, calculation methods based on compiled measured data were suggested and they included “multiplication factor” based on data taken on thousands of antenna systems. With the advent of electronic spreadsheets, more complex calculators were developed to take into account al

42、l of the individual components in the RF path along with more specifications associated with the individual components. This approach also allowed for calculation of not only the typical system value where random vector combinations are employed, but also allows for calculation of the worst-case sys

43、tem value where all vectors add together in phase 1. Over the years, an antenna VSWR specification of 1.5:1 (14 dB RL) has been deemed acceptable for most applications. This value equates to 96% forward power transfer or only 4% reflected power. Many system owners have increased this 14 dB return lo

44、ss number by a few dB, which improves the VSWR (e.g., 16 dB RL to include a transmission line contribution) and define it as the total system return loss goal. As the industry progresses to very high-speed data transmission, there is another phenomenon that may need to be considered. For example, th

45、roughput for 64 QAM modulations can be degraded due to distortion. A higher system VSWR translates to reduced modulation fidelity, caused by non-optimal loading of the power amplifier (PA). This concept was introduced as non-optimal PA loading in a NIC by its antenna.7, 8. TSB-179-A 3 3.0 DEFINITION

46、S AND ABBREVIATIONS EVM: Error Vector Magnitude loge: The natural logarithm MHA: Mast Head Amplifier (same as Tower Mounted Amplifier) NIC: Network Interface Card PA: Power Amplifier QAM: Quadrature Amplitude Modulation RF: Radio Frequency RL: Return Loss RF Path: The path an RF signal travels to ge

47、t from the transmitter output until it is radiated by the antenna. This is not to be confused with the propagation loss of the RF path between antennas. TMA: Tower Mounted Amplifier (same as Mast Head Amplifier) VNA: Vector Network Analyzer Equations: VSWR = 11+= 20201 101 10RLRL+= 11RFRFPPPP+(1) Re

48、turn Loss (RL) = 10 10 10110 og 20 og 20 og1FRP VSWRLL LP VSWR = =+(2) Voltage Reflection Coefficient201( ) 101RLRFVSWR PVSWR P= = =+(3) Where: Return Loss(dB)is a positive value 0 1 TIA-PN-179-A TO BE PUBLISHED AS TSB-179-A 4 4.0 SYSTEM VSWR ESTIMATION TOOLS 4.1 Naval Electronic Warfare Handbook Ea

49、rly total system VSWR estimates made use of nomographs like the one shown in Figure 1 below from the Naval Electronic Warfare Handbook2: Figure 1 Reduction of VSWR by Attenuation The results obtained from Figure 1 are somewhat over-simplified in that they do not take into account the VSWR of the attenuator (transmission line). Instead, it simply adds twice the attenuator value (once to get up to the load and a second time to get back to the bottom end) to produce the load VSWR. As an example, a load (antenna) with a 10:1 VSWR connecte