TIA TSB-150-2004 Private Land Mobile Radio Two-Way Portable Equipment RF Exposure (EME) Test Report Guidelines《专业陆地移动无线电双向便携式设备RF暴露测试报告指南》.pdf

《TIA TSB-150-2004 Private Land Mobile Radio Two-Way Portable Equipment RF Exposure (EME) Test Report Guidelines《专业陆地移动无线电双向便携式设备RF暴露测试报告指南》.pdf》由会员分享，可在线阅读，更多相关《TIA TSB-150-2004 Private Land Mobile Radio Two-Way Portable Equipment RF Exposure (EME) Test Report Guidelines《专业陆地移动无线电双向便携式设备RF暴露测试报告指南》.pdf（21页珍藏版）》请在麦多课文档分享上搜索。

1、 TSB-150 December 2004R/01-2012Private Land Mobile Radio Two-Way Portable Equipment RF Exposure (EME) Test Report Guidelines NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilit

2、ating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufa

3、cturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the

4、American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with

5、 its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. PN-3-0120, formulated under the cognizance of

6、the TIA TR-8 Mobile and Personal Private Radio Standards, TR-8.17 Subcommittee on RF Exposure). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS I

7、NDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Repro

8、duction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact the TIA Standards Department or go to the TIA website (www.tiaonline.org) for details

9、 on how to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright or Telecommunications Industry Association Technology (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other

10、 form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more part

11、ies. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disc

12、laims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions

13、 are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another org

14、anization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thediti

15、on) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) an

16、d published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compli

17、ance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES C

18、ONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REP

19、RESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND

20、 ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UP

21、ON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA W

22、ITHOUT SUCH LIMITATIONS. FORWARD This forward is not part of this Telecommunications Systems Bulletin (TSB). This TSB is the product of work undertaken by the Electromagnetic Energy (EME) working group of the TIA TR8.17 RF Exposure Engineering Subcommittee. TR8.17 is a subcommittee of TIA TR8 Privat

23、e Land Mobile Engineering Committee and addresses Radio Frequency exposure matters of Private Radio products. Members of TR8.17 who contributed to this TSB are: Joel Berger, Wayne Leland (TIA, Private Radio Section chair), Roy McClellan III, Bob Speidel (TR8.17 Chair), Fred Moloznik (EME WG leader),

24、 John Oblak, Mike Ramnath, Ken Enger, Michael Sailsman, Masaaki Takahashi, Ron Backlund and Tess Zagaruyka (TR8.17 Vice-Chair). Prior to balloting this TSB comments on the document were sought from PCTEST Engineering Laboratory, Inc.; Bay Area Compliance Lab Corp.; Celltech Labs Inc.; MET Laboratori

25、es Inc.; Rhein Tech Laboratories, Inc. (RTL); UltraTech Laboratories, Inc.; and Nemko Canada. All comments received from these organizations prior to ballot authorization have been incorporated. The members of TR8.17 and the members of the EME Working Group appreciate the need to provide clear and c

26、onsistent information documenting device compliance with the appropriate regulatory RF Exposure requirements. During the review of RF Exposure Test Reports previously submitted to relevant regulatory bodies the members of the Working Group encountered wide variety in the formats of the reports submi

27、tted. While the Working Group believes the devices covered in these test reports previously submitted demonstrate compliance with all necessary regulatory requirements, the Working Group found the diversity of the test report format made the review of the report contents time-consuming, confusing an

28、d inefficient. The Working Group realized a more uniform reporting format would likely improve the efficiency of the review process by reducing if not eliminating the confusion encountered during the review of previously submitted RF Exposure Test Reports. The Working Group believes the amount of ti

29、me necessary to adequately review the test reports will decrease significantly if reviewers know exactly where the information being sought is located in the test report. The sole purpose of this Bulletin is to suggest a consistent RF Exposure test report format for portable two way land mobile radi

30、o products. This Bulletin does not alter, in any way, the relevant regulatory requirements for RF Exposure. The information in this Bulletin is intended to be solely informative. iiPrivate Land Mobile Radio (FCC Part 90) Two-Way Portable Equipment RF Exposure (EME) Test Report Guidelines TABLE OF CO

31、NTENTS Forward ii Table of Contents iii 1. INTRODUCTION .1 1.1. Scope.1 1.2. Relevant Documents2 1.3. Definitions 2 2. SUGGESTED TEST REPORT CONTENTS3 2.1. Cover Page3 2.2. Test Report Table of Contents.4 2.3. Introduction and Overview .4 2.4. References, Standards and Guidelines, 4 2.5. Description

32、 of Device Under Test (DUT) .5 2.6. Description of Test System5 2.6.1. Description of Robotics / Probes / Readout Electronics .6 2.6.2. Description of Phantom(s) 6 2.6.3. Description of Equivalent Tissues.6 2.7. Additional Test Equipment.6 2.8. SAR Measurement System Verification.7 2.8.1. Equivalent

33、 Tissue Test results7 2.8.2. System Check Test results7 2.9. DUT Test Strategy and Methodology.8 2.9.1. DUT Configuration 8 2.9.2. Test Plan.8 2.9.3. Device positioning procedures8 2.10. Environmental Test Conditions8 2.11. Test Results Summary.9 2.12. Conclusion .9 2.13. Appendices 9 ANNEX A.1 Sugg

34、ested Cover Page Format Template A ANNEX A.2 Suggested Test Report Format Template B iiiPrivate Land Mobile Radio Two-Way Portable Equipment RF Exposure (EME) Test Report Guidelines 1. INTRODUCTION Exposure to radio frequency (RF) energy has been identified as an environmental factor to be considere

35、d before a radio transmitter will be certified by various regulatory agencies. Federal Communications Commission (FCC) OET Bulletin 65 (Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields, edition 97-01, August 1997) outlines various Electromagnetic

36、Energy (EME) evaluation methods as they apply to mobile, portable and base station Land Mobile Radio Products and provides assistance in determining whether a proposed or existing transmitting facility, operation or device complies with established FCC RF Exposure requirements. 47 CFR 2.1091, 2.1093

37、, 1.1307(b) and 1.1310 require RF exposure compliance for fixed, mobile and portable transmitting devices. 47 CFR 1.1310 lists the field strength and power density limits that are applicable to mobile and fixed transmitters. 47 CFR 2.1093 (d) lists the specific absorption rate (SAR) limits for porta

38、ble transmitters that are applicable for general population and for occupational exposure conditions. OET Bulletin 65 97-01, Supplement C 01-01 to OET Bulletin 65, ANSI/IEEE C95.3, NCRP Report 119 etc. also provide guidance on RF exposure evaluation for meeting field strength, power density and SAR

39、requirements. Numerous rules sections and other documents discuss RF exposure requirements and methods to be used for verification of compliance with such requirements, but there exists no information outlining any recommended formats for reports submitted to document compliance with relevant RF Exp

40、osure requirements. 1.1. Scope To recommend uniform format guidelines that can be used in the preparation of test reports submitted to the Federal Communications Commission and other relevant regulatory agencies, where such portable two-way radio equipment test reports are intended to document compl

41、iance with relevant regulatory RF Exposure requirements. 11.2. Relevant Documents This Telecommunications Systems Bulletin (TSB) should be interpreted in conjunction with definitions and procedures described in the following documents: IEEE C95.1-1991 IEEE C95.3-1991 47 CFR 1.1307, 1.1310, 2.1091 an

42、d 2.1093 FCC OET Bulletin 65, edition 97-01 Supplement C to OET Bulletin 65, edition 01-01 (June 2001 release) 1.3. Definitions 1.3.1. Portable 2-way device1For purposes of FCC RF exposure requirements, a portable device is defined as a transmitting device designed to be used with its radiating stru

43、ctures located within 20 centimeters of a persons body. Portable devices are evaluated for RF exposure compliance with respect to specific absorption rate (SAR) limits. 1.3.2. Mobile 2-way device2For purposes of FCC RF exposure requirements, a mobile device is defined as a transmitting device design

44、ed to be used in other than fixed locations3and to be generally used in such a way that a separation distance of at least 20 centimeters is normally maintained between the transmitters radiating structures and the body of the user and nearby persons. A 2-way radio operating with a vehicular-mounted

45、antenna is an example of a mobile transmitter device. Mobile devices are normally evaluated for RF exposure compliance with respect to field strength or power density limits. When appropriate, mobile devices may also be evaluated with respect to SAR limits to demonstrate compliance. 1.3.3. FCC RF Ex

46、posure Limits The RF exposure limits adopted by the FCC are generally based on recommendations from the National Council on Radiation Protection and Measurements (NCRP) Report No. 86 and the American National Standards Institute (ANSI/IEEE) C95.1-1992.4FCC 1See 47 CFR 2.1093 2See 47 CFR 2.1091 3In t

47、his context, the term “fixed location“ means that the device, including its antenna, is physically secured at a permanent location and is not able to be easily moved to another location. 4NCRP Report No. 86, “Biological Effects and Exposure Criteria for Radiofrequency Electromagnetic Fields“, sectio

48、ns 17.4.1, 17.4.1.1, 17.4.2 and 17.4.3; copyright NCRP, 1986, Bethesda, Maryland 20814. ANSI/IEEE C95.1-1992, “IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz”, Section 4.1; copyright 1992 by the Institute of Electrical and E

49、lectronics Engineers, Inc., New York, New York 10017.2RF exposure compliance for mobile devices is determined according to the frequency dependent field strength and power density limits described in 47 CFR 1.1310. The SAR limits for portable devices are described in 47 CFR 2.1093. 1.3.4. RF Exposure Categories: 1.3.4.1. Controlled environment The occupational/controlled exposure limits are applicable to situations in which persons are exposed as a consequence