TIA J-STD-038-B-2004 GSM MAP and TIA-41 MAP-Revision B-cdma2000 Support《GSM MAP 和 TIA-41 MAP B 版本-- CDMA 2000 支持》.pdf

《TIA J-STD-038-B-2004 GSM MAP and TIA-41 MAP-Revision B-cdma2000 Support《GSM MAP 和 TIA-41 MAP B 版本-- CDMA 2000 支持》.pdf》由会员分享，可在线阅读，更多相关《TIA J-STD-038-B-2004 GSM MAP and TIA-41 MAP-Revision B-cdma2000 Support《GSM MAP 和 TIA-41 MAP B 版本-- CDMA 2000 支持》.pdf（556页珍藏版）》请在麦多课文档分享上搜索。

1、 J-STD-038-B (Revision of J-STD-038-A) August 2004 GSM MAP and TIA-41 MAP-Revision B-cdma2000Support J-STD-038-B-2004 APPROVED: AUGUST 1, 2004 REAFFIRMED: SEPTEMBER 28, 2012 JOINT STANDARDS Joint Standards and Publications are adopted in accordance with the American National Standards Institute (ANS

2、I) patent policy. By such action, the Telecommunications Industry Association or the Alliance for Telecommunications Industry Solutions does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does no

3、t purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. This sta

4、ndard was developed under Project No. 3-4818-RV2-RF1, formulated under the cognizance of the TIA TR-45.8 Subcommittee on Core Networks and ATIS Wireless Technologies and Systems Committee (WTSC). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Technology Telephone (703)907-7700; Fax: (703)907-7

5、727 or by email to receptiontiaonline.org. This document was coordinated between ATIS and TIA. A Word from TIA: TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstanding between manufacturers and purchasers, facilitating interchangeabil

6、ity and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his/her particular need. Existence of such Standards and Publications shall not be in any respect preclude any member or nonmember of TIA from manufacturing or selling pr

7、oducts not conforming to such Standards and Publications, nor shall the existence of such Standards and Publications preclude their voluntary use by those other than TIA members, whether the standard is to be used either domestically or internationally. TIA Documents contain information deemed to be

8、 of technical value to the industry, and are published at the request of the originating Committee without necessarily following the rigorous public review and resolution of comments which is a procedural part of the development of a American National Standard (ANS). Further details of the developme

9、nt process are available in the TIA Engineering Manual, located at http:/www.tiaonline.org/standards/sfg/engineering_manual.cfm A Word from ATIS: As a leading technology and solutions development organization, ATIS brings together the top global ICT companies to advance the industrys most-pressing b

10、usiness priorities. Through ATIS committees and forums, nearly 200 companies address cloud services, device solutions, emergency services, M2M communications, cyber security, ehealth, network evolution, quality of service, billing support, operations, and more. These priorities follow a fast-track d

11、evelopment lifecyclefrom design and innovation through solutions that include standards, specifications, requirements, business use cases, software toolkits, and interoperability testing. ATIS is accredited by the American National Standards Institute (ANSI). ATIS is the North American Organizationa

12、l Partner for the 3rd Generation Partnership Project (3GPP), a founding Partner of oneM2M, a member and major U.S. contributor to the International Telecommunication Union (ITU) Radio and Telecommunications sectors, and a member of the Inter-American Telecommunication Commission (CITEL). For more in

13、formation, visit www.atis.org. NOTICE FROM PATENT HOLDERS The users attention is called to the possibility that compliance with this standard may require use of an invention covered by patent rights. By publication of this standard, no position is taken with respect to the validity of this claim or

14、of any patent rights in connection therewith. The patent holder has, however, filed a statement of willingness to grant a license under these rights on reasonable and nondiscriminatory terms and conditions to applicants desiring to obtain a license. Details may be obtained from the Telecommunication

15、s Industry Association, Alliance for Telecommunications Industry Solutions or the American National Standards Institute. Copyright Telecommunications Industry Association 2012 Copyright Alliance for Telecommunications Industry Solutions 2012 All rights reserved This document is subject to change. NO

16、TICE OF COPYRIGHT This document is issued under a joint copyright by the Telecommunications Industry Association and the Alliance for Telecommunications Industry Solutions, and may not be reproduced without permission. Reproduction of these documents either in hard copy or soft copy (including posti

17、ng on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/a

18、bout/faqDetail.cfm?id=18 Organizations may obtain permission to reproduce a limited number of copies by entering into a license agreement. For information, contact: Global Engineering Documents 15 Inverness Way East Englewood, CO 80112-5704 or call U.S.A. and Canada (1-800-854-7179) International (3

19、03) 397-7956 OR ATIS Document Center: http:/www.atis.org/docstore/default.aspx Alliance for Telecommunications Industry Solutions 1200 G Street, NW Suite 500 Washington, DC 20005 (202) 628-6380 NOTICE OF DISCLAIMER AND LIABILITY The document to which this Notice is affixed (the “Document”) has been

20、prepared by one or more Engineering Committees or Formulating Groups of the Telecommunications Industry Association (“TIA”). In addition, the Document was balloted by Alliance for Telecommunications Industry Solutions (“ATIS”) Wireless Technologies and Systems Committee. TIA is not the author of the

21、 Document contents, but publishes and claims copyright to the Document pursuant to licenses and permission granted by the authors of the contents. TIA Engineering Committees and Formulating Groups are expected to conduct their affairs in accordance with the TIA Engineering Manual (“Manual”), the cur

22、rent and predecessor versions of which are available at http:/www.tiaonline.org/standards/sfg/engineering_manual.cfm. The ATIS Wireless Technologies and Systems Committee is expected to conduct its affairs in accordance with the ATIS Operating Procedures which is available at http:/www.atis.org/lega

23、l/op/asp. TIAs function is to administer the process, but not the content, of document preparation in accordance with the Manual and, when appropriate, the policies and procedures of the American National Standards Institute (“ANSI”). Likewise, ATIS function, and on behalf of its Committees and Foru

24、ms, is to administer the process according to its Operating Procedures, but not develop the content of the document. TIA and ATIS do not evaluate, test, verify or investigate the information, accuracy, soundness, or credibility of the contents of the Document. In publishing the Document, TIA and ATI

25、S disclaim any undertaking to perform any duty owed to or for anyone. If the Document is identified or marked as a project number (PN) document, or as a standards proposal (SP) document, persons or parties reading or in any way interested in the Document are cautioned that: (a) the Document is a pro

26、posal; (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document m

27、ay involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. Neither TIA nor ATIS makes any search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and calle

28、d to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. When IPR consisting of patents are claimed and called to ATISs attention, a statement from the holder thereof is requested, all in accordance with the ATISs Operating Procedures. Neither TIA nor

29、 ATIS takes any position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. Neither TIA or ATIS will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor wi

30、ll TIA or ATIS opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. TIA and ATIS do not

31、enforce or monitor compliance with the contents of the Document. TIA and ATIS do not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMI

32、TATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA AND ATIS EXPRESSLY DISCLAIM ANY AND ALL RESPONSIBILITIES FOR THE

33、ACCURACY OF THE CONTENTS AND MAKE NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTE

34、NTS. NEITHER TIA NOR ATIS SHALL BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS O

35、F PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREO

36、F, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. J-STD-038-B0-iNetwork Interworking Betwen GSM AP and TIA-41 MAP;1Revision B CDMA200 Suport2Volume 0 Overview and Network Reference Model3(Revision of J-STD-038-A Volume 0)4J-STD-038-B0-iiAbstract1This standard addresses th

37、e interworking and interoperability between ANSI-41 MAP2 and GSM2MAP4 based networks in the support of subscribers roaming between networks. The3interworking and interoperability functionality of the services, information flows, and message4mappings are specified.5This standard consists of four volu

38、mes:6Volume 0 - Overview and Interworking Reference Model7Volume 1 - Service Descriptions8Volume 2 - Information Flows9Volume 3 - Message Mappings10This Volume contains an overview of the Interworking and Interoperability Function (IIF) and the1associated network reference model.12J-STD-038-B0-iiiCo

39、ntents1Abstractii2Contents.iii3List of Tablesv4List of Figures.vi5Forewordvii61 Introduction171.1 General181.2Purpose191.3Scope.1102 References213 Definitions and Acronyms4123.1Definitions4133.2Acronyms7144 Overview of Internetwork Roaming11155 IIF Reference Model and Description12165.1Reference Mod

40、el12175.2Description12185.2.1 Provisioned Subscriber Data.13195.3Interworking for Network Interfaces.15205.3.1HLR - VLR Interface16215.3.2Originating / Gateway MSC - Serving MSC Interface1825.3.3 MC / SMS-SC - Serving MSC Interface19235.3.4HLR SGSN Interface2024J-STD-038-B0-iv5.4IIF Implementation A

41、lternatives2115.4.1IIF Resides within a GSM Network Entity.2125.4.2IIF Resides within ANSI-41 Network Entity2135.4.3IIF Resides within External Network Element2245.4.4IIF Resides within Both ANSI-41 and GSM Network Entities2256J-STD-038-B0-vList of Tables1There are no tables in this volume.2J-STD-03

42、8-B0-viList of Figures1Figure 1: IIF Reference Model122Figure 2: HLR - VLR Interface163Figure 3: Originating / Gateway MSC - Serving MSC Interface184Figure 4: MC / SMS-SC - Serving MSC Interface.195Figure 5: HLR- SGSN Interface.206Figure 6: IIF Resides within GSM Network Element.217Figure 7: IIF Res

43、ides within ANSI-41 Network Element218Figure 8: IIF Resides within External Network Element229Figure 9: IIF Resides within both ANSI-41 and GSM Network Elements.22101J-STD-038-B0-viiForeword1This foreword is not part of this standard.2This standard addresses the interworking and interoperability bet

44、ween ANSI-41 MAP and GSM3based networks in the support of subscribers roaming between networks. The objective of the4standard is to achieve fully automatic, two-way interoperability between the heterogeneous5networks. Services supported by this standard are described along with the associated6inform

45、ation flows and message mappings. However, not all services and associated capabilities7of ANSI-41 MAP and GSM MAP are supported by this standard. In general the attempt has been8to focus on the key subscriber services needed in the market.9The focus of the first release of this standard was on comm

46、on GSM and ANSI-136 TDMA10services and associated network signaling (i.e. ANSI-41 MAP and GSM MAP). A prerequisite for1this interoperability is multi-mode mobile stations with an enhanced SIM card for roaming12between ANSI-136, GSM, and AMPS networks.13The first release of the standard did not defin

47、e or require changes to existing ANSI-41 MAP or14GSM MAP to achieve the described interworking and interoperability. However, due to15differences between the services and associated capabilities of the MAP protocols, complete and16fully transparent interoperability may not have been achieved for som

48、e services. Future releases17of this standard may require changes to ANSI-41 MAP, GSM MAP and the associated services to18achieve full transparency while roaming between the different networks.19Aspects of TIA/EIA-136 Revision C have been incorporated into the standard.20Revision A adds GPRS service

49、 capability in GSM Foreign Mode.21Revision B adds one-way and two-way roaming between GSM and CDMA systems.223J-STD-038-B0-11Introduction11.1 General2When a subscriber to one network type (e.g., ANSI-41) roams to a network of another type (e.g.,3GSM), interworking and interoperability functions are required to support roaming and enable4service. This standard describes an Interworking and Interoperability Function (IIF) to support this5cross-technology roaming between ANSI-41 and GSM networks. The IIF supports a multi-mode6mobile station with a removable Subsc