TIA J-STD-036-B-2007 Enhanced Wireless 9-1-1 Phase II《增强无线9-1-1阶段2》.pdf

《TIA J-STD-036-B-2007 Enhanced Wireless 9-1-1 Phase II《增强无线9-1-1阶段2》.pdf》由会员分享，可在线阅读，更多相关《TIA J-STD-036-B-2007 Enhanced Wireless 9-1-1 Phase II《增强无线9-1-1阶段2》.pdf（310页珍藏版）》请在麦多课文档分享上搜索。

1、 JOINT STANDARD Enhanced Wireless 9-1-1 Phase II ANSI/J-STD-036-B (Revision to ANSI/J-STD-036-A) May 2007 Jointly Developed By: TELECOMMUNICATIONS INDUSTRY ASSOCIATION AND ALLIANCE FOR TELECOMMUNICATIONS INDUSTRY SOLUTIONS ANSI/J-STD-036-B Approved: May 30, 2007 Copyright Telecommunications Industry

2、 Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-JOINT STANDARDS Joint Standards and Publications are adopted in accordance with the American National Standards Institute (ANSI) patent policy. By such action, the Te

3、lecommunications Industry Association or the Alliance for Telecommunications Industry Solutions does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems

4、 associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. This standard was developed under Project No. SP

5、-3-3890-RV2, formulated under the cognizance of the TIA TR-45 Committee on Mobile and Personal Communications Systems and ATIS Wireless Technologies and Systems Committee (WTSC). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards Telephone (703)907-7700; Fax: (703)907-7727 or by email to

6、 standardstiacomm.org. This document is being published by Global Engineering on behalf of TIA and ATIS through the ATIS Document Center. This document was coordinated between ATIS and TIA. A Word from TIA: TIA Engineering Standards and Publications are designed to serve the public interest through

7、eliminating misunderstanding between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his/her particular need. Existence of such Standards and Publications shall

8、 not be in any respect preclude any member or nonmember of TIA from manufacturing or selling products not conforming to such Standards and Publications, nor shall the existence of such Standards and Publications preclude their voluntary use by those other than TIA members, whether the standard is to

9、 be used either domestically or internationally. TIA Documents contain information deemed to be of technical value to the industry, and are published at the request of the originating Committee without necessarily following the rigorous public review and resolution of comments which is a procedural

10、part of the development of a American National Standard (ANS). Further details of the development process are available in the TIA Engineering Manual, located at http:/www.tiaonline.org/standards/procedures/manuals/engineering.cfm A Word from ATIS: ATIS is a technical planning and standards developm

11、ent organization that is committed to rapidly developing and promoting technical and operations standards for the communications and related information technologies industry worldwide using a pragmatic, flexible and open approach. Over 1,100 participants from more than 350 communications companies

12、are active in ATIS 22 industry committees, and its Incubator Solutions Program. Further information on ATIS is available at http:/www.atis.org. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without licens

13、e from IHS-,-,-NOTICE FROM PATENT HOLDERS The users attention is called to the possibility that compliance with this standard may require use of an invention covered by patent rights. By publication of this standard, no position is taken with respect to the validity of this claim or of any patent ri

14、ghts in connection therewith. The patent holder has, however, filed a statement of willingness to grant a license under these rights on reasonable and nondiscriminatory terms and conditions to applicants desiring to obtain a license. Details may be obtained from the Telecommunications Industry Assoc

15、iation, Alliance for Telecommunications Industry Solutions or the American National Standards Institute. Copyright Telecommunications Industry Association 2007 Copyright Alliance for Telecommunications Industry Solutions 2007 All rights reserved This document is subject to change. Copyright Telecomm

16、unications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE OF COPYRIGHT This document is issued under a joint copyright by the Telecommunications Industry Association and the Alliance for Telecommuni

17、cations Industry Solutions, and may not be reproduced without permission. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact TIA St

18、andards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright Organizations may obtain permission to reproduce a limited number of copies by entering into a license agreem

19、ent. For information, contact: Information Handling Services 15 Inverness Way East Englewood, CO 80112-5704 or call U.S.A. and Canada (1-800-854-7179) International (303) 397-7956 OR ATIS Document Center: www.atis.org Alliance for Telecommunications Industry Solutions 1200 G Street, NW Suite 500 Was

20、hington, DC 20005 (202) 628-6380 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE OF DISCLAIMER AND LIABILITY The document to which this Notice is affixed (the “Document”)

21、 has been prepared by one or more Engineering Committees or Formulating Groups of the Telecommunications Industry Association (“TIA”). In addition, the Document was balloted by ATIS Wireless Technologies and Systems Committee. TIA is not the author of the Document contents, but publishes and claims

22、copyright to the Document pursuant to licenses and permission granted by the authors of the contents. TIA Engineering Committees and Formulating Groups are expected to conduct their affairs in accordance with the TIA Engineering Manual (“Manual”), the current and predecessor versions of which are av

23、ailable at http:/www.tiaonline.org/standards/procedures/manuals/engineering.cfm. The ATIS Wireless Technologies and Systems Committee is expected to conduct its affairs in accordance with the ATIS Operating Procedures which is available at http:/www.atis.org/ATISop.pdf. TIAs function is to administe

24、r the process, but not the content, of document preparation in accordance with the Manual and, when appropriate, the policies and procedures of the American National Standards Institute (“ANSI”). Likewise, ATIS function, and on behalf of its Committees and Forums, is to administer the process accord

25、ing to its Operating Procedures, but not develop the content of the document. TIA and ATIS do not evaluate, test, verify or investigate the information, accuracy, soundness, or credibility of the contents of the Document. In publishing the Document, TIA and ATIS disclaim any undertaking to perform a

26、ny duty owed to or for anyone. If the Document is identified or marked as a project number (PN) document, or as a standards proposal (SP) document, persons or parties reading or in any way interested in the Document are cautioned that: (a) the Document is a proposal; (b) there is no assurance that t

27、he Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual prop

28、erty rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. Neither TIA nor ATIS makes any search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from t

29、he holder thereof is requested, all in accordance with the Manual. When IPR consisting of patents are claimed and called to ATISs attention, a statement from the holder thereof is requested, all in accordance with the ATISs Operating Procedures. Neither TIA nor ATIS takes any position with reference

30、 to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. Neither TIA or ATIS will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA or ATIS opine or judge whether p

31、roposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. TIA and ATIS do not enforce or monitor compliance with the

32、contents of the Document. TIA and ATIS do not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNI

33、NG THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA AND ATIS EXPRESSLY DISCLAIM ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKE NO REP

34、RESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. Copyright Telecommunications Indust

35、ry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NEITHER TIA NOR ATIS SHALL BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WI

36、THOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVI

37、SED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot

38、 for ResaleNo reproduction or networking permitted without license from IHS-,-,-ANSI/J-STD-036-BEnhanced Wireless 9-1-1 Phase IIRevision History Copyright Telecommunications Industry Association 2007. Copyright Alliance for Telecommunications Industry Solutions 2007.All rights reserved.This document

39、 is subject to change.ForewordThis foreword is not part of this standard.This Standard was prepared jointly by TIA TR-45.2 and ATIS WTSC.Major changes in Revision B include support for GSM/UMTS interim position, a Heartbeatmessage from MPC to PDE, support for UMTS, the Location Description on the ES

40、P interface,hybrid position sources and support for MEID.An erratum to Revision B replaced MEID-related text that had been inadvertently removedduring editing of the Revision B publication document.ANSI/J-STD-036-B contains changes made for readability, involving the removing of color-ation indicati

41、ng text added or modified before Revision B, and removing the cross-hatchingindicating the modification of certain tables.This Standard contains 8 annexes of which Annex C and Annex D are considered normative andpart of this Standard. The remaining annexes are considered informative and not part of

42、thisStandard.Revision Date RemarksRev. 0 August 2000 Initial publicationRev. 0 Addendum 1 December 2000 First addendumRev. A March 2002 Publication of Revision ARev. A Addendum 1 March 2003 Addendum to Revision ARev. B April 2005 Revision BErratum December 2005 An erratum was published to correct th

43、e omission of the MEID param-eter from several operations.ANSI/J-STD-036-B November 2006 Initial ANSI publicationCopyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ANSI/J-STD-036-B

44、iEnhanced Wireless 9-1-1 Phase IIContentsChapter 1:Overview1 Introduction .1-11.1 Objective1-11.2 Scope1-11.3 Normative References1-12 Definitions and Acronyms .1-5Chapter 2:Stage 1 Emergency Services Service Descriptions1 Introduction .2-11.1 Emergency Location Information Delivery (ELID)2-12 Assum

45、ptions.2-12.1 Common Assumptions.2-12.2ANSI-41Assumptions.2-22.3 GSM/UMTS Assumptions2-3Chapter 3:Functional Overview, ANSI-411 Introduction3-12 Methodology 3-23 Network Reference Model.3-24 Network Entities 3-34.1 Coordinate Routing Database (CRDB)3-34.2 Emergency Services Message Entity (ESME).3-3

46、4.3 Emergency Services Network Entity (ESNE).3-34.4 Mobile Position Center (MPC)3-34.5 Mobile Switching Center (MSC).3-34.6 Position Determining Entity (PDE).3-34.7 Public Safety Answering Point (PSAP).3-35 Messages Across Network Interfaces.3-46 Network Entity Relationships 3-5Chapter 4:Stage 2 Eme

47、rgency Services Network Description, ANSI-41.3xx1 Emergency Location Information Delivery (ELID) Scenarios .4-2Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ANSI/J-STD-036-Bii

48、1.1 ELID Using CAS Push4-21.1.1 PDE Queried for Position4-21.1.2 PDE Autonomous Delivery of Position 4-31.1.3 Timeout Waiting for Position .4-41.1.4 Three-Way Call to PSAP After Intersystem Handoff 4-51.2 ELID Using NCAS Pull .4-71.2.1 PDE Queried For Position.4-71.2.2 PDE Autonomous Delivery of Pos

49、ition 4-81.3 Emergency Services Call Routing and ELID .4-91.3.1 Routing Based on Position.4-91.3.2 Inter-MSC Routing Based on Position .4-111.3.3 Routing Based on Cell/Sector .4-131.4 Position Update Using NCAS Pull .4-151.4.1 ESME Request for Position Update.4-151.4.2 Inter-MSC Request for Updated Position .4-161