TIA EIA-732-734-2001 Cellular Digital Packet Data (CDPD) System Specification Generic Equipment Management Ensemble《蜂窝数字分组数据(CDPD)系统规范 通用设备管理综合 TIA EIA IS-732-734的更新件》.pdf

《TIA EIA-732-734-2001 Cellular Digital Packet Data (CDPD) System Specification Generic Equipment Management Ensemble《蜂窝数字分组数据(CDPD)系统规范 通用设备管理综合 TIA EIA IS-732-734的更新件》.pdf》由会员分享，可在线阅读，更多相关《TIA EIA-732-734-2001 Cellular Digital Packet Data (CDPD) System Specification Generic Equipment Management Ensemble《蜂窝数字分组数据(CDPD)系统规范 通用设备管理综合 TIA EIA IS-732-734的更新件》.pdf（36页珍藏版）》请在麦多课文档分享上搜索。

1、 TIA/EIA STANDARD Cellular Digital Packet Data (CDPD) System Specification Generic Equipment Management Ensemble TIA/EIA-732-734 (Upgrade of TIA/EIA/IS-732-734) JULY 2001 TELECOMMUNICATIONS INDUSTRY ASSOCIATION The Telecommunications Industry Association represents the communications sector of ANSI/

2、TIA/EIA-732-734-2001 Approved: June 7, 2001 TIA/EIA-732-734 NOTICE TIA/EIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and ass

3、isting the purchaser in selecting and obtaining with minimum delay the proper product for his particular need. Existence of such Standards and Publications shall not in any respect preclude any member or nonmember of TIA/EIA from manufacturing or selling products not conforming to such Standards and

4、 Publications, nor shall the existence of such Standards and Publications preclude their voluntary use by those other than TIA/EIA members, whether the standard is to be used either domestically or internationally. Standards and Publications are adopted by TIA/EIA in accordance with the American Nat

5、ional Standards Institute (ANSI) patent policy. By such action, TIA/EIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use

6、 or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Standards Proposal No. 4033-734-UG, formulated under the cognizanc

7、e of the TIA TR-45.6 Subcommittee on Adjunct Data Packet Wireless Technology.) Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION 2001 Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 PRICE: Please refer to current Catalog of EIA ELECTRONIC INDUSTRIES ALLIANCE STANDARD

8、S and ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) All rights reserved Printed in U.S.A. PLEASE! DONT VIOLATE THE LAW! This document is copyrighted by the TIA and may not be reproduced without permission. Organizations ma

9、y obtain permission to reproduce a limited number of copies through entering into a license agreement. For information, contact: Global Engineering Documents 15 Inverness Way East Englewood, CO 80112-5704 or call U.S.A. and Canada 1-800-854-7179, International (303) 397-7956 734iTIA/EIA-732-73412345

10、6789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960Contents1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 734-11.1 Unique Identity . . . . . . . . . . . . . . . . . . . . . . . . .

11、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .734-21.2 General Description of the Ensemble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .734-21.3 Scope and Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12、. . . . . . . . . . . . . . . . . .734-31.4 Relationships with Other Ensembles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .734-32 Management Context . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 734-42.1 General Introduction to

13、 Management Context . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .734-42.2 Management View and Level of Abstraction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .734-52.3 Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14、 . . . . . . . . . . . . . . . . . . . . . . . . . . .734-52.4 Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .734-72.4.1 Event Report Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

15、 . . . . . . . . . . . . . .734-72.4.2 Log Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .734-72.4.3 Configuration Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .734

16、-72.4.3.1 Install Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .734-72.4.3.2 Deinstall Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .734-82.4.3.3 Change Equipment Configurati

17、on Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . .734-82.4.4 Fault Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .734-82.4.4.1 Report Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

18、 . . . . . . . . . . . . . . . . . .734-82.4.4.2 Run Self-Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .734-83 Information Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 734-93.1 General I

19、ntroduction to Managed Objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .734-93.2 Relationships . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .734-103.2.1 Entity Relationship Diagrams . . . . . .

20、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .734-113.2.2 Object Naming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .734-133.2.3 Use of Local Distinguished Names . . . . . . . . . . . . . . . . . . . . . .

21、. . . . . . . . . . . . . . . . . .734-143.3 Scenarios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .734-143.3.1 Event Reporting Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

22、. . . . . . .734-163.3.2 Log Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .734-173.3.3 Install (Configure) New Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .734-183.3.4 Deinstall E

23、quipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .734-203.3.5 Run Self-Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .734-213.4 Management Information References . . . .

24、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .734-224 Ensemble Conformance Requirements. . . . . . . . . . . . . . . . . . . . . . . . 734-224.1 General Conformance Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .734-224.2 Spe

25、cific Conformance Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .734-234.2.1 OSI Management Functions Profiles Conformance . . . . . . . . . . . . . . . . . . . . . . . . . .734-234.2.2 Ensemble Functions Conformance . . . . . . . . . . . . . . . . . .

26、. . . . . . . . . . . . . . . . . . . . . .734-244.2.3 Ensemble Managed Object Conformance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .734-254.2.4 Ensemble Name Binding Conformance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .734-26TIA/EIA-732-73473

27、4ii1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859605 Ensemble Managed Object Conformance Statements (MOCS) Proformas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 734-26734iii1234567891011121314151617

28、18192021222324252627282930313233343536373839404142434445464748495051525354555657585960TIA/EIA-732-734PART 734 Generic Equipment Management EnsembleForewordThis foreword is not part of the StandardThis Standard has been produced by the TR-45.6 Subcommittee of the TIA/EIA/TR-45 Committee.This document

29、 contains significant portions of material originally submitted by the Cellular Digital Packet Data Forum Inc.This document set constitutes the Cellular Digital Packet Data (CDPD) System Specification. CDPD is a technology intended to provide packet data networking services to mobile hosts. The medi

30、a used to provide these services consists of radio channels typically used for Advanced Mobile Phone System (AMPS) cellular service.Document StructureThis Standard is published as a series of Parts. Each Part contains information pertaining to one aspect of the system.The functional structure of the

31、 Cellular Digital Packet Data System Specification is as follows:a71 Introduction and OverviewTIA/EIA-732-734 Generic Equipment Management Ensemble734iv123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960This document provides an overview of

32、 the CDPD Network and serves as a guide to the remainder of the system specification for specific detailed information.In this Part, design objectives are described and are followed by the design concepts used to realize the stated objectives. The resultant network is then described in terms of its

33、external interfaces, major network elements and network services. A listing of key identifiers in CDPD is then followed by a comprehensive glossary of CDPD terms and a reference list of non-CDPD documents.This Part contains the detailed listing of all Parts of the Cellular Digital Packet Data Specif

34、ications.a71 Part 300 to Part 799Protocols and InterfacesThese Parts form the heart of the CDPD System Specification. They define the communications architecture of CDPD, including communications layer entities, services, protocol stacks, the three key interfaces, Radio Resource Control, Mobility Ma

35、nagement, Accounting Management, Support Services and Network Management.a71 Part 800 to Part 899Supplementary Protocol InformationThese Parts contain further specification of the primary CDPD protocols. State transition matrices are used to define protocol state machines, and Protocol Implementatio

36、n Conformance Statements (PICS) are provided for implementors.a71 Part 900 to Part 999Protocol Test SpecificationsFollowing an overview of protocol testing, these Parts contain Abstract Test Suites (ATSs) and Protocol Implementation eXtra Information for Test (PIXIT) for the protocols specified in P

37、art 300 to Part 799.a71 Part 1000 to Part 1999Guidelines for Service ProvidersThese Parts describe guidelines for CDPD Service Providers.7341123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960Introduction TIA/EIA-732-734PART 734 Generic Equ

38、ipment Management Ensemble1 IntroductionThis Part defines a managed object ensemble for managing any form of telecommunications or computer physical equipment. Management includes configuring the equipment and detecting alarms and is done at a generic level without regard to the function(s) the equi

39、pment performs.This Part does not assume any familiarity with CDPD terms or concepts. Part 100 provides a comprehensive glossary of CDPD terms. References to non-CDPD documents, shown in square brackets (e.g., CCITT-X.701), are listed in Part 100, which provides a complete CDPD bibliography.Ensemble

40、s provide a top down view of a particular solution to a management problem. In order to focus on the solution to this management problem, specific restrictions are placed upon particular referenced definitions.The concepts and format of Ensembles are described in the “NM Forum Ensemble Concepts and

41、Format” NMF-025 specification document.Each ensemble contains general text in each section that is common to all ensembles. By convention this common text is portrayed in bold italic characters.This ensemble, wherever possible, references documents that define the components of the ensemble.TIA/EIA-

42、732-734 Generic Equipment Management Ensemble7342123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960The management problem is identified as a set of requirements and constraints. In defining the solution to this management problem, the reso

43、urces to be managed, the functions to be applied and the scenarios describing the interactions are all identified. The ensemble references base standards and International Standardized Profiles (ISPs). It also references libraries containing definitions expressed by GDMO (Guidelines for the Definiti

44、on of Managed Objects CCITT-X.722) templates.The purpose of this document is to collect management information definitions and profiles and show how they can be applied to manage the resources identified in this ensemble.This ensemble is organized as follows:a71 Section 1, “Introduction,” provides a

45、 high level overview describing the ensemble and the structure of the document.a71 Section 2, “Management Context,” identifies the managed resources and management capabilities of the ensemble.a71 Section 3, “Information Model,” specifies all management information components of this ensemble.a71 Se

46、ction 4, “Ensemble Conformance Requirements,” provides or references statements of conformance for this ensemble. The Managed Object Conformance Statements (MOCS) Proformas, specific to the ensemble are provided in Section 5.1.1 Unique IdentityThe unique identity is a registered object identifier us

47、ed to identify this ensemble.joint-iso-ccitt(2) country(16) us(840) organization(1) cdpd-net(113660)network-management(2) ensemble(11) 4 1.2 General Description of the EnsembleThis ensemble specifies the managed Object Classes and applications used to manage telecommunications or computer equipment

48、at a generic level. This ensemble defines configuration and fault management functions.This ensemble focuses on managing real physical components of network elements without regard to the underlying technology used or the functions the equipment supports. The ensemble should be applicable to many di

49、fferent ways of implementing equipment components by defining a common management interface and model of management information. As much as possible, this ensemble is defined without regard to management 7343Introduction TIA/EIA-732-734123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960policies or structures of management systems so it may be applied by any Service Provider.1.3 Scope and PurposeEnsembles represent specific solutions to particular problems. Thus, an ensemble is the complete description of the prob