SANS 831-3-2009 Building construction - Expression of users- requirements Part 3 Acoustical requirements《楼房建设 用户要求表达 第3部分 声学要求》.pdf

《SANS 831-3-2009 Building construction - Expression of users- requirements Part 3 Acoustical requirements《楼房建设 用户要求表达 第3部分 声学要求》.pdf》由会员分享，可在线阅读，更多相关《SANS 831-3-2009 Building construction - Expression of users- requirements Part 3 Acoustical requirements《楼房建设 用户要求表达 第3部分 声学要求》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-22510-0 SANS 831-3:2009 Edition 1 ISO 6242-3:1992 Edition 1SOUTH AFRICAN NATIONAL STANDARD Building construction Expression of users requi

4、rements Part 3: Acoustical requirements This national standard is the identical implementation of ISO 6242-3:1992 and is adopted with the permission of the International Organization for Standardization. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001

5、 Tel: +27 12 428 7911 Fax: +27 12 344 1568 www.sabs.co.za SABS This standard may only be used and printed by approved subscription and freemailing clients of the SABS. SANS 831-3:2009 Edition 1 ISO 6242-3:1992 Edition 1 Table of changes Change No. Date Scope National foreword This South African stan

6、dard was approved by National Committee SABS TC 59, construction standards, in accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in January 2009. This standard may only be used and printed by approved subs

7、cription and freemailing clients of the SABS.INTERNATIONAL STANDARD ISO 624213 First edition 1992-04-0 1 Building construction - Expression of users requirements - Part 3: Acoustical requ Construction immobili6 irements v-e - Expression des exigences de Iutilisateur - 1 Partie 3: Confort auditif Ref

8、erence number ISO 6242-3:1992(E) SANS 831-3:2009This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO 624293:1992(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national Standards bodies (ISO mem

9、ber bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Esch member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, govern- m

10、ental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees at-e circulated to the

11、member bodies for voting. Publication as an Inter- national Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard ISO 6242-3 was prepared by Technical Committee ISO/TC 59, Building construction, Sub-Committee SC 3, Functionalluser requirements and Pe

12、rformance in building construction. ISO 6242 consists of the following Parts, under the general title Building construction - Expression of users requirements: - Part 1: Thermal requirements - Part 2: Air purify requirements - Part 3: Acoustical requirements - Part 4: Lighting requiremen fs Annex A

13、of this part of ISO 6242 is for information only. 8 ISO 1992 All rights reserved. No part of this publlcation may be reproduced or utilized In any form or by any means, electronie or mechanical, including photocopying and microfflm, without Permission in writing from the publisher. International Org

14、anization for Standardization Case Postale 56 + CH-121 1 Geneve 20 + Switzerland Printed in Switzerland ii SANS 831-3:2009This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO 6242-3:1992(E) Introduction This part of ISO 6242 is one of a set deal

15、ing with the expression of en- vironmental requirements for buildings, in terms suitable for use in regulations and briefs for building projects. The Parameters defined tan be used for routine verification of the Performance of buildings, either by calculation (for example at the design Stage) or me

16、asurement (for example of elements, equipment, spaces or whole buildings), and are meant to provide readily understood information on users requirements throughout the building process. This set of International Standards is not intended to represent the complete state of knowledge about these aspec

17、ts of environmental sci- ence, some of which are the concern of other ISO Technical Com- mittees. . . . Ill SANS 831-3:2009This standard may only be used and printed by approved subscription and freemailing clients of the SABS.This page intentionally left blank SANS 831-3:2009This standard may only

18、be used and printed by approved subscription and freemailing clients of the SABS.INTERNATIONAL STANDARD ISO 6242-3:1992(E) Building construction - Expression of users requirements - Part 3: Acoustical requirements 1 Scope This patt of ISO 6242 defines how the acoustical re- quirements of building us

19、ers tan be identified, ex- pressed and quantified. It describes users objectives and the Parameters used to express them. For each parameter-, it specifies units of measurement, preferred increments for values and means of evaluation. lt also lists the environmental and human factors affecting the c

20、hoice of a value (criterion) for each Parameter. lt is intended for use a) in preparing briefs for building projects; b) in formulating building laws and regulations; c) in drafting Standards and other normative docu- ments; and d) more generally when specifying the required Performance of buildings

21、 in terms of users re- quirements. Some of the Parameters given in this patt of ISO 6242 apply only to certain types of building. Compliance with this part of ISO 6242 does not therefore depend on implementing the whole of its contents in every case. 2 Normative references The following Standards co

22、ntain provisions which, through reference in this text, constitute provisions of this part of ISO 6242. At the time of publication, the editions indicated were valid. All Standards arc subject to revision, and Parties to agreements based on this part of ISO 6242 are encouraged to investi- gate the p

23、ossibility of applying the most recent edi- tions of the Standards indicated below. Members of IEC and ISO maintain registers of currently valid In- ternational Standards. ISO 14003:1978, Acoustics - Measurement of Sound insulation in buildings and of building elements - Part 3: Laboratory measureme

24、nts of airborne Sound insulation of building elements. ISO 140-4:1978, Acoustics - Measurement of Sound insulation in buildings and of building elements I Part 4: Field measuremenfs of airborne Sound insu- lation between rooms. ISO 140-5:1978, Acoustics - Measurement of Sound insulation in buildings

25、 and of building elements - Part 5: Field measurements of airborne Sound insu- lation of facade elements and facades. ISO 140-63978, Acoustics - Measurement of Sound insulation in buildings and of building elements - Part 6: Laborstory measurements of impact Sound insulation of floors. ISO 140-7:197

26、8, Acoustics - Measurement of Sound insulation in buildings and of building elements - Part 7: Field measurements of impact Sound insu- lation of floors. ISO 140-8: 1978, Acoustics - Measurement of Sound insulation in buildings and of building elements - Part 8: Laborstory measurements of the reduct

27、ion of transmitted impact noise by f7oor coverings on a Standard f7oor. ISO 140-93985, Acoustics - Measurements of Sound insulation in buildings and of building elements - Part 9: Laborstory measurement of room-to-room airborne Sound insulation of a suspended ceiling with a Plenum above it. SANS 831

28、-3:2009This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO 6242-3:1992(E) ISO 717.1:1982, Acoustics - Rating of Sound insu- lation in buildings and of building elements - Part 1: Airborne Sound insulation in buildings and of interior building e

29、lements. ISO 717-2:1982, Acoustics - Rating of Sound insu- lation in buildings and of building elements - Part 2: Impact Sound insulation. ISO 717-3:1982, Acoustics - Rating of Sound insu- lation in buildings and of building elements - Part 3: Airborne Sound insulation of facade elements and facades

30、. ISO 1996.1:1982, Acoustics - Description and measurement of environmental noise - Part 1: Basic quantities and procedures. ISO 3382:1975, Acoustics - Measurement of rever- beration time in auditoria. IEC 6513979, Sound Level meters. IEC 804:1985, Integrating-averaging Sound Level me- ters. e) acce

31、ptable (or required) level of background Sound. The choice of some Parameters and criteria will dif- fer, depending on the type of external noise to which the building is subjected. 4 Parameters for expressing users requirements Acoustical comfort, quality and privacy depend on a) the airborne Sound

32、 insulation provided by in- terior building elements (Walls, floors, doors, etc.); b) the airborne Sound insulation provided by ex- terior building elements (external Walls, facades, I windows, etc.); c) the impact Sound insulation of floors and Walls; d) acceptable Sound pressure levels, taking int

33、o account any Sound required for masking (priv- acy); and e) the reverberation time of rooms or spaces. 3 Users objectives 3.1 Control of the acoustical environment within buildings shall fulfil the following objectives: a) to provide a suitable Standard of freedom from annoyance due to intrusive no

34、ises, whether originating within or outside the building: b) to provide a suitable Standard of Speech privacy between rooms or spaces; and c) to provide a suitable Standard of acoustic quality within rooms or spaces. 3.2 Criteria to meet these objectives shall reflect the following: a) activities to

35、 be accommodated; b) age and health of the occupants; c) proportion of likely occupants it is intended to satisfy; d) time during which the requirements must be satisfied (taking account of variations in the noise emitted by various sources); and 4.1 Location, uniformity and tolerante for acoustical

36、 Parameters As the level of Sound will be essentially uniform in all but the largest rooms or spaces, it is not necessary to state requirements linked to the lo- cations at which the requirements will apply. Uniformity may be required of the acoustic quality of auditoria, but this involves details b

37、eyond the scope of this part of ISO 6242. The various Sound indices incorporate a certain tol- erance in their treatment of Sound of differing fre- quencies. Conventional tolerante requirements apply only to reverberation time, and are stated as part of the Parameter. 42 . Expression of acoustical P

38、arameters Details of means of expression, together with as- sociated information, are given in table 1. 5 Factors affecting the choice of criteria Details of factors Iikely to affect the choice of criteria for particular applications, together with associated information, are given in table2. 2 SANS

39、 831-3:2009This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO 6242=3:1992(E) Parameter Definition Tabte 1 - Parameters Means of expression: units; preferred Nature of increments criterion Means of evaluation Airborne Sound trans- mission Alter

40、natives: 1) Weighted appar- ent Sound reduction index, R, 2) Weighted stan- dardized level differ- en=, D, w See ISO 717-1 Decibels (dB); Chosen Maximum Calculation: data on the airborne from the series: Sound transmission of typical forms of 25 - 28 - 30 - 33 - construction may be obtained from 35

41、- 38 - 40 - 43 - national Standards, Codes of practice 45 - 48 - 50 - 53 dE3 or other technical publications Measurement: 1) for interior building elements, and for Sound transmission between rooms, in accordance with ISO 140-3 and ISO 140-4 2) for exterior building elements, in accordance with ISO

42、140-5 and ISO 717-3 Impact Sound Alternatives: Decibels (dB); Chosen Maximum transmission Calculation: data on the impact Sound from the series: (for floors) 1) Weighted normal- transmission of typical forms of con- ized impact Sound 35 - 38 - 40 - 43 - struction may be obtained from pressure, L, ,(

43、L, w) 45 - 48 - 50 - 53 - national standards, Codes of practice 3 9 55 - 58 dB or other technical publications 2) Weighted stan- dardized impact Measurement: Single-number quan- Sound pressure level, tities for impact Sound transmission L tan be derived in accordance with nr, w ISO 140-6 and ISO 140

44、-7 See ISO 717-2 Sound press- Alternatives: Decibels (dB); Chosen Maximum, Calculation: estimation from the ure levels 1) A-weighted Sound from the series: which may Character, intensity and distribution pressure level LpA for be stated 25 - 28 - 30 - 33 - over time of external noise sources, specif

45、ic types of noise 35 - 38 - 40 - 43 - for specific taking into account the airborne Sound originating from hours of the 45 - 48 - 50 - 53 dB insulation of the building envelope, in within another part of day or accordance with national Standards or the building, for night, or for Codes of practice o

46、r regulations example from equip- specific daytime or Measurement: ment night-time See IEC 651 periods 1) for LpA, using a Sound level me- ter in accordance with IEC 651, having 2) Equivalent con- a time weighting of S or F tinuous A-weighted Sound pressure level 2) for LAeq T, using an integrating

47、av- L eraging Sound level meter in accord- Aeq T9 for general noise from external ante with IEC 804, or a Sound level meter in accordance with IEC 651, av- sources (originating either outside or eraged over the relevant time interval. within the building) For noise of an impulsive or tonal Character

48、, measured values may be See ISO 1996-1 adjusted in accordance with ISO 1996-1 Reverber- ation time (does not usually need to be speci- fied for resi- dential or other small rooms) The time T required Multiples of 0,l s Maximum for the Sound press- Calculation: estimation from the size, and/or form

49、and acoustic Character of sur- ure level to decrease minimum by 60 d after the faces will be possible Sound Source has Measurement: for auditoria, reverber- stopped ation time shall be measured within a frequency range of at least 125 Hz to 4000 Hz, in accordance with ISO 3382. The principles of this test procedure may be applied to other types of room SANS 831-3:2009This standard may only be used and printed by approved subscription and freemailing clients of the SABS.ISO 6242=3:1992fE) Factor Table 2 - Factors affecting criteria Examples of classeslcategories Means of