SANS 61058-2-4-2004 Switches for appliances Part 2-4 Particular requirements for independently mounted switches《器具开关 第2-4部分 对独立安装开关的特殊要求》.pdf

《SANS 61058-2-4-2004 Switches for appliances Part 2-4 Particular requirements for independently mounted switches《器具开关 第2-4部分 对独立安装开关的特殊要求》.pdf》由会员分享，可在线阅读，更多相关《SANS 61058-2-4-2004 Switches for appliances Part 2-4 Particular requirements for independently mounted switches《器具开关 第2-4部分 对独立安装开关的特殊要求》.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ICS 29.120.40 ISBN 0-626-15218-6 SANS 61058-2-4:2004 Edition 1.1 IEC 61058-2-4:2003 Edition 1.1 Any reference to SABS IEC 61058-2-4 is deemed to be a ref

4、erence to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Switches for appliances Part 2-4: Particular requirements for independently mounted switches This national standard is the identical implementation of IEC 61058-2-4:2003 and is adopted with the pe

5、rmission of the International Electrotechnical Commission. Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 1568 international code + 27 12 www.stansa.co.za Standards South Africa SANS 61058-2-4:2004 Edition 1.1 IEC 61058-

6、2-4:2003 Edition 1.1 Table of changes Change No. Date Scope IEC amdt 1 2003 Amended to modify the scope, to add a normative reference, to modify and replace table 3 and titles, to replace an additional note for terminals and termination and to add a new normative annex and two informative annexes. A

7、bstract Applies to independently mounted switches for appliances (electronic or mechanical) actuated by hand, by foot or by other human activity for use with appliances and other equipment for household and similar purposes, with a rated voltage not exceeding 480 V and a rated current not exceeding

8、63 A. Keywords control devices, electrical household appliances, sensors, switches. National foreword This South African standard was approved by National Committee StanSA SC 67C, Electricity distribution systems and components Electrical accessories, in accordance with procedures of Standards South

9、 Africa, in compliance with annex 3 of the WTO/TBT agreement. This SANS edition cancels and replaces the first SABS edition (SABS IEC 61058-2-4:1995). NORME INTERNATIONALE CEI IEC INTERNATIONAL STANDARD 61058-2-4 Edition 1.1 2003-03 Interrupteurs pour appareils Partie 2-4: Rgles particulires pour le

10、s interrupteurs montage indpendant Switches for appliances Part 2-4: Particular requirements for independently mounted switches Pour prix, voir catalogue en vigueur For price, see current catalogue IEC 2003 Droits de reproduction rservs Copyright - all rights reserved Aucune partie de cette publicat

11、ion ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lditeur. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical,

12、including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission, 3, rue de Varemb, PO Box 131, CH-1211 Geneva 20, Switzerland Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmailiec.ch Web: www.iec.ch S Commission Elec

13、trotechnique InternationaleInternational Electrotechnical Commission CODE PRIX PRICE CODE Edition 1:1995 consolide par lamendement 1:2003 Edition 1:1995 consolidated with amendment 1:2003 61058-2-4 IEC:1995+A1:2003 3 CONTENTS FOREWORD.7 1 Scope.11 2 Normative references .13 3 Definitions 13 4 Genera

14、l requirement.13 5 General notes on tests .13 6 Rating 13 7 Classification15 8 Marking and documentation17 9 Protection against electric shock 17 10 Provision for earthing .19 11 Terminals an terminations 19 12 Construction.21 13 Mechanism .35 14 Protection against solid foreign objects, ingress of

15、dust, water, and humid conditions35 15 Insulation resistance and dielectric strength .37 16 Heating 37 17 Endurance37 18 Mechanical strength .37 19 Screws, current-carrying parts and connections37 20 Clearances, creepage distances, solid insulation and coatings of rigid printed board assemblies39 21

16、 Resistance to heat and fire.39 22 Resistance to rusting39 23 Abnormal operation and fault conditions for electronic switches .39 24 Components .39 25 EMC requirements39 Annex R (normative) Routine tests .45 Annex S (informative) Sampling tests .45 Annex T (informative) Switch families .45 61058-2-4

17、 IEC:1995+A1:2003 5 Figure 101 Example of pull apparatus for testing the cord anchorage.41 Figure 102 Example of torque apparatus for testing the cord anchorage 41 Figure 103 Example of apparatus for flexing test .43 Table 3 Switch information.17 Table 101 Switch information .17 Table 102 Rated curr

18、ents for resistor loads and related type of cables.29 Table 103 Torque values for torque test.31 Table 104 Torque values for screws of insulating material .39 61058-2-4 IEC:1995+A1:2003 7 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ SWITCHES FOR APPLIANCES Part 2-4: Particular requirements for indepe

19、ndently mounted switches FOREWORD 1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote international co-operation on all questions conc

20、erning standardization in the electrical and electronic fields. To this end and in addition to other activities, the IEC publishes International Standards. Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this

21、preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the tw

22、o organizations. 2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested National Committees. 3) The documents produced h

23、ave the form of recommendations for international use and are published in the form of standards, technical specifications, technical reports or guides and they are accepted by the National Committees in that sense. 4) In order to promote international unification, IEC National Committees undertake

24、to apply IEC International Standards transparently to the maximum extent possible in their national and regional standards. Any divergence between the IEC Standard and the corresponding national or regional standard shall be clearly indicated in the latter. 5) The IEC provides no marking procedure t

25、o indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with one of its standards. 6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. The IEC shall not be held respon

26、sible for identifying any or all such patent rights. This part of International Standard IEC 61058 has been prepared by subcommittee 23J: Switches for appliances, of IEC technical committee 23: Electrical accessories. This standard shall be used in conjunction with IEC 61058-1, Switches for applianc

27、es Part 1: General requirements (third edition, 2000). It lists the changes necessary to convert that standard into the IEC standard: Particular requirements for independently mounted switches. This part constitutes the first edition of IEC 61058-2-4. This consolidated version of IEC 61058-2-4 is ba

28、sed on the first edition (1995) documents 23J/132/FDIS and 23J/143/RVD and its amendment 1 (2003) documents 23J/253/FDIS and 23J/255/RVD. It bears the edition number 1.1. A vertical line in the margin shows where the base publication has been modified by amendment 1. The annex R forms an integral pa

29、rt of this standard. The annexes S and T are for information only. 61058-2-4 IEC:1995+A1:2003 9 The committee has decided that the contents of the base publication and its amendment 1 will remain unchanged until 2007. At this date, the publication will be reconfirmed; withdrawn; replaced by a revise

30、d edition, or amended. In this part: a) The following print types are used: requirements proper: in roman type; test specifications: in italic type; explanatory matter: in smaller roman type. b) Subclauses, figures or tables which are additional to those in part 1 are numbered starting from 101. 610

31、58-2-4 IEC:1995+A1:2003 11 SWITCHES FOR APPLIANCES Part 2-4: Particular requirements for independently mounted switches 1 Scope This clause of part 1 is applicable except as follows: 1.1 Replacement: This International Standard applies to independently mounted switches for appliances (mechanical or

32、electronic) actuated by hand, by foot or by other human activity, to operate or control electrical appliances and other equipment for household or similar purposes with a rated voltage not exceeding 480 V and a rated current not exceeding 63 A. These switches are intended to be operated by a person,

33、 via an actuating member or by actuating a sensing unit. The actuating member or sensing unit can be integral with or arranged separately, either physically or electrically, from the switch and may involve transmission of a signal, for example electrical, optical, acoustic or thermal, between the ac

34、tuating member or sensing unit and the switch. Switches which incorporate additional control functions governed by the switch function are within the scope of this standard. This standard also covers the indirect actuation of the switch when the operation of the actuating member or sensing unit is p

35、rovided by a remote control or a part of an appliance or equipment such as a door. NOTE 1 Electronic switches may be combined with mechanical switches giving full disconnection or micro-disconnection. NOTE 2 Electronic switches without a mechanical switch in the supply circuit provide only electroni

36、c disconnection. Therefore, the circuit on the load side is always considered to be live. NOTE 3 For switches used in tropical climates, additional requirements may be necessary. NOTE 4 Attention is drawn to the fact that the standards for appliances may contain additional or alternative requirement

37、s for switches. NOTE 5 Throughout this standard, the word “appliance” means “appliance or equipment”. 1.2 This subclause of Part 1 is not applicable 1.3 This subclause of Part 1 is applicable. 1.4 This subclause of Part 1 is not applicable. 61058-2-4 IEC:1995+A1:2003 13 2 Normative references This c

38、lause of part 1 is applicable except as follows: Addition: IEC 60227-3:1997, Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 3: Non-sheathed cables for fixed wiring 3 Definitions This clause of part 1 is applicable, except as follows: Additional definitions:

39、3.3.101 independently mounted switch switch intended to be mounted away from the controlled appliance or equipment and intended to be connected to the fixed wiring on the supply side 3.3.102 design A switch switch where the cover or coverplate can be removed without displacement of the conductor(s)

40、NOTE Displacement means movement of the conductor, see IEC 60669-1, subclause 7.1.7. 3.3.103 design B switch switch where the cover or coverplate cannot be removed without displacement of the conductors NOTE Displacement means movement of the conductor, see IEC 60669-1, subclause 7.1.7. 4 General re

41、quirement This clause of part 1 is applicable. 5 General notes on tests This clause of part 1 is applicable. 6 Rating This clause of part 1 is applicable. 61058-2-4 IEC:1995+A1:2003 15 7 Classification This clause of part 1 is applicable, except as follows: Replacement: 7.1.5 According to the degree

42、 of protection provided by the switch, when mounted as declared: 7.1.5.1.1, 7.1.5.1.2 and 7.1.9.1 are not applicable. 7.1.15.2 This subclause of Part 1 is not applicable. Additional subclauses: 7.1.101 According to design: 7.1.101.1 design A switch; 7.1.101.2 design B switch. NOTE 1 See definitions

43、3.3.102 and 3.3.103. NOTE 2 If a switch has a base which cannot be separated from the cover or cover plate, and requires an intermediate plate which can be removed for redecorating the wall, it is considered to be of design A, provided the intermediate plate meets the requirements specified for cove

44、rs and cover plates. 7.1.102 According to outlet facilities: 7.1.102.1 switch with inlet/outlet facilities for rigid cables; 7.1.102.2 switch with inlet facilities for rigid cables and outlet facilities for flexible cables. 61058-2-4 IEC:1995+A1:2003 17 8 Marking and documentation This clause of Par

45、t 1 is applicable with the following modifications in Table 3: Table 3 Switch information Means of information No. Characteristic Subclause Common type reference C.T. Unique type reference U.T. 2 SWITCH ENVIRONMENT/MOUNTING 2.1 Degree of protection provided for the switch when mounted according to d

46、ocumentation (IP code of IEC 60529) NOTE Additional letters listed in IEC 60529 are not used.7.1.5.1 and 7.1.5.2 Ma Ma 4 ELECTRICAL LOAD/CONNECTION 4.1 Rated voltage or rated voltage range 6.1 Ma Ma 101 SWITCH DESIGN 101.1 Type of switch design 7.1.101 Do Do 102 OUTLET FACILITIES 102.1 Type of outle

47、t facilities 7.1.102 Do Do Addition: Table 101 Switch information No. Subclause Switch with unique-type-reference . U.t. Switch with common-type-reference . C.T. 101 SWITCH DESIGN 101.1 Type of switch design 7.1.101 Do Do 102 OUTLET FACILITIES 102.1 Type of outlet facilities 7.1.102 Do Do 9 Protecti

48、on against electric shock This clause of part 1 is applicable except as follows: 9.1 Add the following sentence to a): The switch shall be fitted with the conductor of the smallest or largest nominal cross-sectional area according to Table 4 whichever is more unfavourable, or with a rigid conduit, a

49、 pliable conduit or a flexible conduit. 61058-2-4 IEC:1995+A1:2003 19 Addition to b): This test finger, with an electrical indicator, is not applied to membranes in inlet openings and is applied to thin-walled knock-outs with a force of only 10 N. Additional subclause: 9.101 Switches operated by means of a removable key or by means of an intermediate part, such as a cord,