SANS 60896-11-2003 Stationary lead-acid batteries Part 11 Vented types - General requirements and methods of test《固定式铅酸蓄电池 第11部分 排气类型 一般要求及试验方法》.pdf

《SANS 60896-11-2003 Stationary lead-acid batteries Part 11 Vented types - General requirements and methods of test《固定式铅酸蓄电池 第11部分 排气类型 一般要求及试验方法》.pdf》由会员分享，可在线阅读，更多相关《SANS 60896-11-2003 Stationary lead-acid batteries Part 11 Vented types - General requirements and methods of test《固定式铅酸蓄电池 第11部分 排气类型 一般要求及试验方法》.pdf（23页珍藏版）》请在麦多课文档分享上搜索。

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ICS 29.220.20 ISBN 0-626-14879-0 SANS 60896-11:2003 Edition 1 IEC 60896-11:2002 Edition 1 SOUTH AFRICAN NATIONAL STANDARD Stationary lead-acid batteries

4、Part 11: Vented types General requirements and methods of tests This national standard is the identical implementation of IEC 60896-11:2002 and is adopted with the permission of the International Electrotechnical Commission. Published by Standards South Africa 1 dr lategan road groenkloof private ba

5、g x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 1568 international code + 27 12 www.stansa.co.za Standards South Africa 2003 SANS 60896-11:2003 Edition 1 IEC 60896-11:2002 Edition 1 Table of changes Change No. Date Scope National foreword This South African standard was approved by National Comm

6、ittee STANSA TC 63, Batteries, in accordance with procedures of Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. NORMEINTERNATIONALECEIIECINTERNATIONALSTANDARD60896-11Premire ditionFirst edition2002-12Batteries stationnaires au plomb Partie 11:Batteries au plomb du type o

7、uvert Prescriptions gnrales et mthodes dessaiStationary lead-acid batteries Part 11:Vented types General requirements and methods of testsPour prix, voir catalogue en vigueurFor price, see current catalogue IEC 2002 Droits de reproduction rservs Copyright - all rights reservedAucune partie de cette

8、publication ne peut tre reproduite niutilise sous quelque forme que ce soit et par aucun procd,lectronique ou mcanique, y compris la photocopie et lesmicrofilms, sans laccord crit de lditeur.No part of this publication may be reproduced or utilized in anyform or by any means, electronic or mechanica

9、l, includingphotocopying and microfilm, without permission in writing fromthe publisher.International Electrotechnical Commission, 3, rue de Varemb, PO Box 131, CH-1211 Geneva 20, SwitzerlandTelephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmailiec.ch Web: www.iec.chCODE PRIXPRICE CODE

10、 RCommission Electrotechnique InternationaleInternational Electrotechnical Commission 60896-11 IEC:2002 3 CONTENTSFOREWORD 51 Scope and object . 92 Normative references. 93 Definitions 114 Mechanical strength115 Electrolyte levels 116 Electrolyte reserve117 Capacity .138 Suitability for floating bat

11、tery operation.139 Endurance 1510 Charge retention.1511 Short-circuit current and internal resistance1712 Accuracy of measuring instruments 1713 Preparation of cells and batteries for testing .1914 Capacity test.1915 Test of suitability for floating battery operation2316 Endurance in discharge-charg

12、e cycles2517 Endurance in overcharge 2518 Charge retention test 2719 Short-circuit current and internal resistance determination2720 Test sequence 3121 Cell and battery markings .3122 Information to be included on the cell or monobloc package .3323 Recommended information for the battery room3324 Ma

13、rking of polarity 33Annex A (informative) Recommended tests 35Figure 1 Discharge characteristic U = f(I) .29Figure 2 Typical test circuit 31Table 1 Test sequence recommended for type tests.31Table A.1 Recommended use of tests for stationary battery applications37Table A.2 Recommended use of tests ap

14、propriate to types of stationary cellsand batteries .3960896-11 IEC:2002 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION_STATIONARY LEAD-ACID BATTERIES Part 11: Vented types General requirements and methods of testsFOREWORD1) The IEC (International Electrotechnical Commission) is a worldwide organizatio

15、n for standardization comprisingall national electrotechnical committees (IEC National Committees). The object of the IEC is to promoteinternational co-operation on all questions concerning standardization in the electrical and electronic fields. Tothis end and in addition to other activities, the I

16、EC publishes International Standards. Their preparation isentrusted to technical committees; any IEC National Committee interested in the subject dealt with mayparticipate in this preparatory work. International, governmental and non-governmental organizations liaisingwith the IEC also participate i

17、n this preparation. The IEC collaborates closely with the InternationalOrganization for Standardization (ISO) in accordance with conditions determined by agreement between thetwo organizations.2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, anint

18、ernational consensus of opinion on the relevant subjects since each technical committee has representationfrom all interested National Committees.3) The documents produced have the form of recommendations for international use and are published in the formof standards, technical specifications, tech

19、nical reports or guides and they are accepted by the NationalCommittees in that sense.4) In order to promote international unification, IEC National Committees undertake to apply IEC InternationalStandards transparently to the maximum extent possible in their national and regional standards. Anydive

20、rgence between the IEC Standard and the corresponding national or regional standard shall be clearlyindicated in the latter.5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for anyequipment declared to be in conformity with one of its standards.6)

21、Attention is drawn to the possibility that some of the elements of this International Standard may be the subjectof patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.International Standard IEC 60896-11 has been prepared by IEC technical committee 21:S

22、econdary cells and batteries.This first edition of IEC 60896-11 cancels and replaces IEC 60896-1 (first edition) publishedin 1987 and its amendments 1 (1988) and 2 (1990), and constitutes a technical revision.The text of this standard is based on the following documents:FDIS Report on voting21/572/F

23、DIS 21/579/RVDFull information on the voting for the approval of this standard can be found in the report onvoting indicated in the above table.This publication has been drafted in accordance with the ISO/IEC Directives, Part 3.Annex A is for information only.60896-11 IEC:2002 7 This standard consti

24、tutes part 11 of the IEC 60896 series, published under the general titleStationary lead acid batteries. At the time of the publication of this part, the following partshad already been published or were in the process of being published: Part 11: Vented types General requirements and methods of test

25、s (this part) Part 21: Valve regulated types Functional characteristics and methods of test 1.The committee has decided that this publication remains valid until 2008. At this date, inaccordance with the committees decision, the publication will be reconfirmed; withdrawn; replaced by a revised editi

26、on, or amended.1To be published. This standard will replace IEC 60896-2:1995, Stationary lead-acid batteries Generalrequirements and methods of test Part 2: Valve regulated types.60896-11 IEC:2002 9 STATIONARY LEAD-ACID BATTERIES Part 11: Vented types General requirements and methods of tests1 Scope

27、 and objectThis part of IEC 60896 is applicable to lead-acid cells and batteries which are designed forservice in fixed locations (i.e. not habitually to be moved from place to place) and which arepermanently connected to the load and to the d.c. power supply. Batteries operating in suchapplications

28、 are called “stationary batteries”.Any type or construction of lead-acid battery may be used for stationary battery applications.This part 11 of the standard is applicable to vented types only.The object of this standard is to specify general requirements and the main characteristics,together with c

29、orresponding test methods associated with all types and construction modes oflead-acid stationary batteries, excluding valve-regulated types.Recommendations on the use of tests for stationary battery application are given in Table A.1.Recommendations relating the type of cell or monobloc to the use

30、of tests are given inTable A.2.Statements and claims of basic performance data by the manufacturer shall correspondto those tests.The tests may also be used for type qualification.2 Normative referencesThe following referenced documents are indispensable for the application of this document.For date

31、d references, only the edition cited applies. For undated references, the latest editionof the referenced document (including any amendments) applies.IEC 60050(151), International Electrotechnical Vocabulary (IEV) Part 151: Electrical andmagnetic devicesIEC 60051 (all parts), Direct acting indicatin

32、g analogue electrical measuring instrumentsand their accessoriesIEC 60359, Electrical and electronic measurement equipment Expression of performanceIEC 60417 (all parts), Graphical symbols for use on equipmentIEC 60485, Digital electronic d.c. voltmeters and d.c. electronic analogue-to-digital conve

33、rters60896-11 IEC:2002 11 3 DefinitionsFor the purposes of the present part of IEC 60896, the following definitions apply.3.1electrolyte reservevolume of electrolyte between minimum and maximum level indication3.2rated capacityCrtquantity of electricity, declared by the manufacturer, which a cell or

34、 battery can deliver underspecified conditions after a full charge. This value is usually expressed in ampere-hours (seeIEV 486-03-22)3.3nominal capacityCnomsuitable approximate quantity of electricity used to identify the capacity of a cell or battery.This value is usually expressed in ampere-hours

35、 (see IEV 486-03-21)3.4enduranceability of a cell or battery to function and withstand operations under specified conditions fora minimum period of time or repeated application thereof4 Mechanical strengthStationary cells or batteries shall be designed to withstand mechanical stresses during normalt

36、ransportation and handling.Resistance to earthquakes, if required, shall be particularly specified.5 Electrolyte levels5.1 Each cell shall be equipped with a device to indicate the minimum and maximumelectrolyte levels.5.2 For containers made of translucent material, the minimum and maximum levels s

37、hall beindicated on the container wall.5.3 For containers made of an opaque material, a gauge shall be provided indicating theposition of the electrolyte level in relation to the minimum and maximum levels.6 Electrolyte reserve6.1 The electrolyte reserve (see 3.1), together with the battery design a

38、nd the chargingmethod used, governs the frequency of inspections for electrolyte level readjustments.6.2 For batteries in float operation (see 8.1) the minimum electrolyte reserve is specified inItem d) of 8.2.60896-11 IEC:2002 13 7 Capacity(Test, see Clause 14).7.1 The essential characteristic of a

39、 stationary cell or battery is its capacity for the storage ofelectric energy. This capacity, expressed in ampere-hours (Ah) varies with the conditionsof use (discharge current and voltage, and temperature).The recommended t-values are:t = 240 h, 20 h, 10 h, 8 h, 5 h, 3 h, 2 h, 1 h, 0,5 h.From these

40、 various Crtvalues one value may be selected and declared as rated capacity Crt(see 3.2).7.2 The most commonly used values of t are between 10 h and 3 h. For these, the finalvoltage (end-of-discharge voltage) shall be Uf= 1,80 V per cell (unless otherwiserecommended or requested by the manufacturer

41、or user). For other discharge rates,the recommended value of Ufshall be set by national standards or shall be stated by themanufacturer together with the value of Crtor together with the particular performance data(see 7.5).7.3 The discharge current corresponding to the rated capacity Crtat the chos

42、en referencetemperature 20 C or 25 C is:Irt= Crt/ t (A)to the final discharge voltage Ufin accordance with 7.2.7.4 The actual capacity Cashall be determined by discharging a fully charged cell or batteryin accordance with Clause 14. The resultant value shall be used for comparison with the ratedcapa

43、city Crtstated by the manufacturer, or for control of the state of a battery after longperiods of service.7.5 The determination of the actual capacity Cain accordance with Clause 14 may also beused for comparison with particular performance data indicated by the supplier. In this casethe current Irt

44、in 14.4 shall be substituted by the particular current corresponding to therelevant performance data.8 Suitability for floating battery operation(Test, see Clause 15).8.1 Stationary batteries are mainly used in floating operationA battery in floating operation has a constant voltage Uflo, permanentl

45、y applied to its terminalwhich is sufficient to maintain it in a state close to full charge and is intended to supply acircuit whose normal power supply may fail. Suitability for this operation shall be checked bya test carried out on cells or on batteries.Batteries which are not in true floating op

46、eration (for example, solar power storage) shouldnot be qualified according to the test method described in Clause 15.60896-11 IEC:2002 15 8.2 Batteries operating in continuous floating operationBatteries operating in continuous floating operation according to Clause 15 shall meet thefollowing requi

47、rements:a) the electrolyte densities shall remain within specified limits in all cells;b) the individual cell voltages shall remain within specified limits;NOTE In some batteries with monobloc design the voltage of individual cells cannot be measured. In thosecases the assessment of uniformity shoul

48、d be made with the voltage of individual monobloc units.c) after a period of six months the actual capacity Caon discharge according to Clause 14shall be at least equal to Crt;d) after a period of six months the loss of electrolyte shall not exceed 50 % of the volumebetween the minimum and maximum l

49、evels. The volume between the minimum andmaximum levels shall be available from the manufacturer.9 EnduranceSee definition 3.4.Depending on the battery and system application an endurance test based on discharge-charge cycles or an overcharge shall be carried out.9.1 Endurance in cyclesThe endurance in discharge-charge cycles shall be tested according to Clause 16 wherefrequent discharges of the battery are to be encountered due either