SANS 60799-2007 Electrical accessories - Cord sets and interconnection cord sets《电器附件 电线组件及互连线组件》.pdf
《SANS 60799-2007 Electrical accessories - Cord sets and interconnection cord sets《电器附件 电线组件及互连线组件》.pdf》由会员分享,可在线阅读,更多相关《SANS 60799-2007 Electrical accessories - Cord sets and interconnection cord sets《电器附件 电线组件及互连线组件》.pdf(13页珍藏版)》请在麦多课文档分享上搜索。
1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA
2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any
3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-20422-8 SANS 60799:2007Edition 1 IEC 60799:1998Edition 2SOUTH AFRICAN NATIONAL STANDARD Electrical accessories Cord sets and interconnecti
4、on cord sets This national standard is the identical implementation of IEC 60799:1998 and is adopted with the permission of the International Electrotechnical Commission. Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 15
5、68 international code + 27 12 www.stansa.co.za Standards South Africa SANS 60799:2007 Edition 1 IEC 60799:1998 Edition 2 Table of changes Change No. Date Scope National foreword This South African standard was approved by National Committee StanSA SC 67C, Electricity distribution systems and compone
6、nts Electrical accessories, in accordance with procedures of Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in September 2007. This SANS document supersedes SANS 1661:2002 (edition 1.4) in part. This SANS document, by reference, forms pa
7、rt of the Compulsory specification for cord sets and cord extension sets (VC 8029), as published in the Government Gazette. Compliance with the requirements of this SANS document will be deemed to be compliance with the said compulsory specification. The South African standard for flexible rubber-in
8、sulated cords, SANS 1574-4, is equivalent to IEC 60245, and cords that comply with SANS 1574-4 may also be used in cord sets. Types R1 and R2 cords given in SANS 1574-4 are equivalent to 60245 IEC 51, and type R3 cords given in SANS 1574-4 are equivalent to 60245 IEC 53. NORMEINTERNATIONALECEIIECINT
9、ERNATIONALSTANDARD60799Deuxime ditionSecond edition1998-08Petit appareillage lectrique Cordons-connecteurs et cordons dinterconnexionElectrical accessories Cord sets and interconnection cord setsCommission Electrotechnique InternationaleInternational Electrotechnical CommissionPour prix, voir catalo
10、gue en vigueurFor price, see current catalogue IEC 1998 Droits de reproduction rservs Copyright - all rights reservedAucune partie de cette publication ne peut tre reproduite niutilise sous quelque forme que ce soit et par aucunprocd, lectronique ou mcanique, y compris la photo-copie et les microfil
11、ms, sans laccord crit de lditeur.No part of this publication may be reproduced or utilized inany form or by any means, electronic or mechanical,including photocopying and microfilm, without permission inwriting from the publisher.International Electrotechnical Commission 3, rue de Varemb Geneva, Swi
12、tzerlandTelefax: +41 22 919 0300 e-mail: inmailiec.ch IEC web site http: /www.iec.chCODE PRIXPRICE CODEKSANS 60799:2007This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .60799 IEC:1998 3 CONTENTSPageFOREWORD . 5Clause1 Scope . 72 Normative refer
13、ences 73 Definitions. 94 General requirements 95 Requirements 116 Continuity and polarity. 157 EMC requirements 15Annex A Routine tests for factory-wired cord sets and interconnection cord sets relatedto safety (protection against electric shock and correct polarity) . 17SANS 60799:2007This s tandar
14、d may only be used and printed by approved subscription and freemailing clients of the SABS .60799 IEC:1998 5 INTERNATIONAL ELECTROTECHNICAL COMMISSIONELECTRICAL ACCESSORIES CORD SETS AND INTERCONNECTION CORD SETSFOREWORD1) The IEC (International Electrotechnical Commission) is a worldwide organizat
15、ion for standardization comprisingall national electrotechnical committees (IEC National Committees). The object of the IEC is to promoteinternational co-operation on all questions concerning standardization in the electrical and electronic fields. Tothis end and in addition to other activities, the
16、 IEC publishes International Standards. Their preparation isentrusted to technical committees; any IEC National Committee interested in the subject dealt with mayparticipate in this preparatory work. International, governmental and non-governmental organizations liaisingwith the IEC also participate
17、 in this preparation. The IEC collaborates closely with the International Organizationfor Standardization (ISO) in accordance with conditions determined by agreement between the twoorganizations.2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, ani
18、nternational consensus of opinion on the relevant subjects since each technical committee has representationfrom all interested National Committees.3) The documents produced have the form of recommendations for international use and are published in the formof standards, technical reports or guides
19、and they are accepted by the National Committees in that sense.4) In order to promote international unification, IEC National Committees undertake to apply IEC InternationalStandards transparently to the maximum extent possible in their national and regional standards. Anydivergence between the IEC
20、Standard and the corresponding national or regional standard shall be clearlyindicated in the latter.5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for anyequipment declared to be in conformity with one of its standards.6) Attention is drawn to t
21、he possibility that some of the elements of this International Standard may be the subjectof patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.International Standard IEC 60799 has been prepared by subcommittee 23G: Appliancecouplers, of IEC technical
22、committee 23: Electrical accessories.This second edition cancels and replaces the first edition published in 1984 and constitutes atechnical revision.The text of this standard is based on the following documents:FDIS Report on voting23G/181/FDIS 23G/186/RVDFull information on the voting for the appr
23、oval of this standard can be found in the report onvoting indicated in the above table.Annex A is for information only.SANS 60799:2007This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .60799 IEC:1998 7 ELECTRICAL ACCESSORIES CORD SETS AND INTERC
24、ONNECTION CORD SETS1 ScopeThis International Standard specifies requirements for cord sets and interconnection cord setsfor household and similar general purpose equipment.It does not apply to cord sets for industrial purposes (with plugs and connectors according toIEC 60309) nor to cord extension s
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- SANS607992007ELECTRICALACCESSORIESCORDSETSANDINTERCONNECTIONCORDSETS 电器附件 电线 组件 互连 PDF

链接地址:http://www.mydoc123.com/p-1031423.html