SANS 60730-2-17-2008 Automatic electrical controls for household and similar use Part 2-17 Particular requirements for electrically operated gas valves including mechanical require.pdf

《SANS 60730-2-17-2008 Automatic electrical controls for household and similar use Part 2-17 Particular requirements for electrically operated gas valves including mechanical require.pdf》由会员分享，可在线阅读，更多相关《SANS 60730-2-17-2008 Automatic electrical controls for household and similar use Part 2-17 Particular requirements for electrically operated gas valves including mechanical require.pdf（35页珍藏版）》请在麦多课文档分享上搜索。

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-21788-4 SANS 60730-2-17:2008 Edition 1.2 IEC 60730-2-17:2007 Edition 1.2SOUTH AFRICAN NATIONAL STANDARD Automatic electrical controls for

4、household and similar use Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements This national standard is the identical implementation of IEC 60730-2-17:2007 and is adopted with the permission of the International Electrotechnical Commission. Publ

5、ished by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 1568 international code + 27 12 www.stansa.co.za Standards South Africa WARNING Can only be used in conjunction with SANS 60730-1. This standard may only be used and printed by

6、approved subscription and freemailing clients of the SABS.SANS 60730-2-17:2008 Edition 1.2 IEC 60730-2-17:2007 Edition 1.2 Table of changes Change No. Date Scope IEC amdt 1 2000 Amended to include electric actuators in combination with gas valves in the standard, to delete and insert definitions, to

7、 add requirements for heating and for threaded parts and connections, and to change requirements for abnormal operation and electronic controls. IEC amdt 2 2007 Amended to extend the scope, to update normative references, to add clause numbers to the list of national deviations in some countries, to

8、 classify valves according to sealing force, to refer to current practice in the country members of CEN/CENELEC, to change the titles of clauses 20, 23 and 26, to add requirements for construction of valves and electromagnetic compatibility, to add maximum winding temperatures for impedance protecte

9、d motorized electric actuators, and to change the requirements for construction of valves, the overvoltage and undervoltage test, and the use of electronic disconnection. National foreword This South African standard was approved by National Committee StanSA TC 72, Safety of electrical appliances an

10、d electronic equipment, in accordance with procedures of Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in August 2008. This SANS document supersedes SANS 60730-2-17:2007 (edition 1.1 as modified by IEC amdt 2:2007). This standard may on

11、ly be used and printed by approved subscription and freemailing clients of the SABS. IEC 60730-2-17 Edition 1.2 2007-11 INTERNATIONAL STANDARD NORME INTERNATIONALE Automatic electrical controls for household and similar use Part 2-17: Particular requirements for electrically operated gas valves, inc

12、luding mechanical requirements Dispositifs de commande lectrique automatiques usage domestique et analogue Partie 2-17: Rgles particulires pour les lectrovannes de gaz, y compris les prescriptions mcaniques INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE CG ICS 9

13、7.120 PRICE CODE CODE PRIX ISBN 2-8318-9327-5 SANS 60730-2-17:2008This standard may only be used and printed by approved subscription and freemailing clients of the SABS. 2 60730-2-17 IEC:1997+A1:2000 +A2:2007 CONTENTS FOREWORD.3 1 Scope and normative references.5 2 Definitions 7 3 General requireme

14、nts .9 4 General notes on tests9 5 Rating.10 6 Classification10 7 Information .12 8 Protection against electric shock.14 9 Provision for protective earthing14 10 Terminals and terminations.14 11 Constructional requirements .14 12 Moisture and dust resistance 20 13 Electric strength and insulation re

15、sistance.20 14 Heating.21 15 Manufacturing deviation and drift 21 16 Environmental stress 22 17 Endurance22 18 Mechanical strength24 19 Threaded parts and connections .24 20 Creepage distances, clearances and distances through solid insulation.25 21 Resistance to heat, fire and tracking .25 22 Resis

16、tance to corrosion 25 23 Electromagnetic compatibility (EMC) requirements emission 25 24 Components .25 25 Normal operation 25 26 Electromagnetic compatibility (EMC) requirements immunity 25 27 Abnormal operation.25 28 Guidance on the use of electronic disconnection .27 Annexes29 Annex H (normative)

17、 Requirements for electronic controls.29 Figures .28 Table 27.2.101 Maximum winding temperature (for test of blocked output conditions and valves declared under table 7.2, item 110)26 SANS 60730-2-17:2008This standard may only be used and printed by approved subscription and freemailing clients of t

18、he SABS.60730-2-17 IEC:1997+A1:2000 3 +A2:2007 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements FOREWORD 1) The International Electrotechn

19、ical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this

20、 end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National C

21、ommittee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) i

22、n accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from

23、all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held

24、 responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any div

25、ergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication

26、. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property d

27、amage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this p

28、ublication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or al

29、l such patent rights. International Standard IEC 60730-2-17 has been prepared by IEC technical committee 72: Automatic controls for household use. This consolidated version of IEC 60730-2-17 consists of the first edition (1997) documents 72/348/FDIS and 72/371/RVD, its amendment 1 (2000) documents 7

30、2/466/FDIS and 72/490/RVD and its amendment 2 (2007) documents 72/744/FDIS and 72/749/RVD. The technical content is therefore identical to the base edition and its amendments and has been prepared for user convenience. It bears the edition number 1.2. A vertical line in the margin shows where the ba

31、se publication has been modified by amendments 1 and 2. SANS 60730-2-17:2008This standard may only be used and printed by approved subscription and freemailing clients of the SABS. 4 60730-2-17 IEC:1997+A1:2000 +A2:2007 This Part 2-17 is intended to be used in conjunction with IEC 60730-1. It was es

32、tablished on the basis of the third edition of that standard (1999) and its amendment 1 (2003). Consideration may be given to future editions of, or amendments to IEC 60730-1. Where this part 2 states “addition“, “modification“ or “replacement“, the relevant requirement, test specification or explan

33、atory matter in part 1 should be adapted accordingly. Where no change is necessary, part 2 indicates that the relevant clause or subclause applies. In the development of a fully international standard it has been necessary to take into consideration the differing requirements resulting from practica

34、l experience in various parts of the world and to recognize the variation in national electrical systems and wiring rules. The “in some countries” notes regarding differing national practice are contained in the following subclauses: 6.11.101 6.103 6.104 Table 7.2, requirements 117 and 118 Table 7.2

35、, notes 103 and 104 11.102 11.103 11.104.3 11.104.5 11.104.11 11.104.14 11.105.1 11.105.2 11.105.3 11.105.6 11.106.1 11.115 17.16.101 18.102 18.103 27.2.101.1 In this publication: 1) The following print types are used: Requirements proper: in roman type; Test specifications: in italic type; Explanat

36、ory matter: in smaller roman type. 2) Subclauses, notes or requirements which are additional to those in part 1 are numbered starting from 101. The committee has decided that the contents of the base publication and its amendments will remain unchanged until the maintenance result date indicated on

37、the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. SANS 60730-2-17:2008This standard may only be used and printed by approved subscription and freemai

38、ling clients of the SABS.60730-2-17 IEC:1997+A1:2000 5 +A2:2007 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements 1 Scope and normative references This clause of part 1 is replaced as

39、 follows: Replacement: 1.1 This part 2 of IEC 60730 applies to electrically operated gas valves for use in, on or in association with, equipment for household and similar use that use electricity, in combination with fuel in the gaseous state such as manufactured gas, natural gas or liquefied petrol

40、eum gas intended to be used for gas burning equipment. Additional considerations may be necessary for gas with corrosive properties. This part 2 also applies to electrically operated gas valves using NTC or PTC thermistors, requirements for which are contained in annex J. 1.1.1 This standard applies

41、 to the inherent safety, to the operating values, operating times, and operating sequences where such are associated with equipment safety, and to the testing of electrically operated gas valves used in, or in association with, household or similar equipment, but also extended to industrial purposes

42、 when no dedicated product standard exists, such as that for central heating, air conditioning, process heating, etc. This part 2 is also applicable to controls for appliances within the scope of IEC 60335-1. Throughout this part 2 the word “equipment“ means “appliance and equipment“. This part 2 do

43、es not apply to electrically operated gas valves designed exclusively for industrial applications. Electrically operated gas valves for equipment not intended for normal household use, but which nevertheless may be used by the public, such as equipment intended to be used by laymen in shops, in ligh

44、t industry and on farms, are within the scope of this part 2. This part 2 identifies a number of mechanical features as “under consideration“. Until these mechanical requirements are incorporated in this part 2, each country using this part 2 will have to quantify these requirements. Compliance of a

45、n electrically operated gas valve with this part 2 does not imply that the valve is acceptable without further tests for these mechanical features. 1.1.2 This part 2 applies to manual controls when such are electrically and/or mechanically integral with electrically operated gas valves. Requirements

46、 for manual switches not forming part of an electrically operated gas valve are contained in IEC 61058-1. SANS 60730-2-17:2008This standard may only be used and printed by approved subscription and freemailing clients of the SABS. 6 60730-2-17 IEC:1997+A1:2000 +A2:2007 This part 2 does not apply to

47、electrically operated gas valves of nominal connection size above DN 150. This part 2 applies to electrically operated gas valves for maximum working pressures up to 400 kPa (4 bar). Hereinafter, the term “valve“ is used to denote an electrically operated gas valve (including prime mover and valve b

48、ody). 1.1.3 An electric actuator that is submitted to the testing laboratory in combination with a gas valve will be evaluated under this part 2. A separate electric actuator is evaluated under IEC 60730-2-14, which provides particular requirements for electric actuators. 1.1.4 This part 2 also appl

49、ies to valves utilized as part of a system, or valves mechanically integral with multifunctional controls. 1.1.5 This part 2 does not apply to valves energized by thermoelectric energy generated in a thermocouple or thermopile inserted in a gas flame. 1.3 Is not applicable. 1.5 Normative references This clause of part 1 is applicable except as follows: Addition: IEC 60730-2-14:2001, Automatic electrical controls for household and similar use Part 2: Particular r