SANS 553-3-2008 Inflatable boats Part 3 Boats with a maximum motor power rating of 15 kW and greater《充气艇 第3部分 最大发动功率额定值为大于等于15KW的艇》.pdf

《SANS 553-3-2008 Inflatable boats Part 3 Boats with a maximum motor power rating of 15 kW and greater《充气艇 第3部分 最大发动功率额定值为大于等于15KW的艇》.pdf》由会员分享，可在线阅读，更多相关《SANS 553-3-2008 Inflatable boats Part 3 Boats with a maximum motor power rating of 15 kW and greater《充气艇 第3部分 最大发动功率额定值为大于等于15KW的艇》.pdf（34页珍藏版）》请在麦多课文档分享上搜索。

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-21552-1 SANS 553-3:2008Edition 1ISO 6185-3:2001Edition 1SOUTH AFRICAN NATIONAL STANDARD Inflatable boats Part 3: Boats with a maximum moto

4、r power rating of 15 kW and greater This national standard is the identical implementation of ISO 6185-3:2001 and is adopted with the permission of the International Organization for Standardization. Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel:

5、 012 428 7911 fax: 012 344 1568 international code +27 12 www.stansa.co.za Standards South Africa SANS 553-3:2008 Edition 1 ISO 6185-3:2001 Edition 1 Table of changes Change No. Date Scope National foreword This South African standard was approved by National Committee StanSA TC 5120.74, Small craft

6、, in accordance with procedures of Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in May 2008. Reference numberISO 6185-3:2001(E)ISO 2001INTERNATIONALSTANDARDISO6185-3First edition2001-11-15Inflatable boats Part 3:Boats with a maximum mo

7、tor power ratingof 15 kW and greaterBateaux pneumatiques Partie 3: Bateaux quips dun moteur dune puissance maximalesuprieure ou gale 15 kWSANS 553-3:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO 6185-3:2001(E)PDF disclaimerThis PDF

8、file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall notbe edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading thisfile, parties accept therein the

9、 responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in thisarea.Adobe is a trademark of Adobe Systems Incorporated.Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-crea

10、tion parameterswere optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely eventthat a problem relating to it is found, please inform the Central Secretariat at the address given below. ISO 2001All rights reserved. Unless o

11、therwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronicor mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member bodyin the country of the requester.ISO copyrigh

12、t officeCase postale 56 Gb7 CH-1211 Geneva 20Tel. + 41 22 749 01 11Fax + 41 22 749 09 47E-mail copyrightiso.chWeb www.iso.chPrinted in Switzerlandii ISO 2001 All rights reservedSANS 553-3:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .IS

13、O 6185-3:2001(E) ISO 2001 All rights reserved iiiContents PageForewordvIntroductionvi1 Scope 12 Normative references 13 Terms and definitions .24 Materials .34.1 General34.2 Reinforced materials making up the hull (excluding glass-fibre-reinforced plasticscomponents) 34.2.1 Requirements.34.2.2 Test

14、methods44.3 Wood.54.3.1 General54.3.2 Plywood 54.3.3 Constructional timbers .64.4 Metal and synthetic material parts.64.5 Glass-fibre-reinforced plastics.65 Functional components 65.1 Conditioning.65.2 Hull fittings .65.2.1 Requirement.65.2.2 Test method65.3 Manual lifting and carrying devices.65.3.

15、1 Requirement.65.3.2 Test method65.4 Valves75.4.1 Inflation.75.4.2 Deflation75.5 Rowlocks and oars 75.5.1 Requirements.75.5.2 Abrasion damage.75.5.3 Prevention from loosening .75.5.4 Strength of rowlocks .85.5.5 Use of the rowlocks and oars.85.6 Transom (where applicable) .85.6.1 Requirement.85.6.2

16、Test method85.7 Hull drainage 85.8 Remote steering system (where offered as standard or optional equipment)85.9 Motor-securing line attachment (outboard engines only).95.10 Towing device (all types) 95.11 Seating and attachment systems (where offered as a standard or optional equipment) 95.12 Electr

17、ical installations (where offered as standard or optional equipment) 95.13 Fuel systems (where applicable)95.14 Ventilation of petrol motor and petrol tank compartments (where applicable) 96 Safety requirements of the completed boat96.1 Maximum permissible number of persons .96.2 Maximum motor power

18、 .106.3 Static stability of the boat .10SANS 553-3:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO 6185-3:2001(E)iv ISO 2001 All rights reserved6.3.1 Requirement .106.3.2 Test method106.3.3 Stability factor (Type Vlll boats only).116.

19、4 Maximum load capacity.116.4.1 Requirement .116.4.2 Test method126.5 Design working pressures126.6 Strength of the hull 126.6.1 Requirement .126.6.2 Test method126.7 Safety ropes and grab handles.136.7.1 Requirement .136.7.2 Test method136.8 Residual buoyancy 136.8.1 Requirement .136.8.2 Test metho

20、d136.9 Manoeuvrability136.9.1 Requirement .136.9.2 Test method136.10 Compartmentation .136.11 Field of vision from the helm position.146.12 Provision for (a) liferaft(s) (Type Vlll boats only)147 Performance test147.1 General147.2 Drop test (RIBs only) .157.2.1 Requirement .157.2.2 Test method157.3

21、In-water performance 157.3.1 Requirement .157.3.2 Test methods167.4 Strength of the towing device 167.4.1 Requirement .167.4.2 Test method167.5 Rowing test (where applicable, see 5.5) 177.6 Watertightness test (not applicable to open floor, self-bailing craft).177.6.1 Requirement .177.6.2 Test metho

22、d187.7 Manoeuvring-speed test187.8 Bailing test (Type Vlll boats only) 187.8.1 Requirement .187.8.2 Test method188 Builders plate(s)189Operators instructions and warning notes 1910 Standard equipment 20Annex A (informative) General arrangement of a typical type VII boat21Annex B (informative) Genera

23、l arrangement of a typical Type VIlI boat .22Bibliography 23SANS 553-3:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO 6185-3:2001(E) ISO 2001 All rights reserved vForewordISO (the International Organization for Standardization) is a

24、worldwide federation of national standards bodies (ISOmember bodies). The work of preparing International Standards is normally carried out through ISO technicalcommittees. Each member body interested in a subject for which a technical committee has been established hasthe right to be represented on

25、 that committee. International organizations, governmental and non-governmental, inliaison with ISO, also take part in the work. ISO collaborates closely with the International ElectrotechnicalCommission (IEC) on all matters of electrotechnical standardization.International Standards are drafted in

26、accordance with the rules given in the ISO/IEC Directives, Part 3.Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.Attention

27、 is drawn to the possibility that some of the elements of this part of ISO 6185 may be the subject of patentrights. ISO shall not be held responsible for identifying any or all such patent rights.International Standard ISO 6185-3 was prepared by Technical Committee ISO/TC 188, Small craft.ISO 6185-3

28、, together with ISO 6185-1 and ISO 6185-2, cancel and replace ISO 6185:1982.They differ significantly from ISO 6185:1982 as they cover boats from unsupported materials, whereas the latteronly covered boats made from reinforced materials.ISO 6185 consists of the following parts, under the general tit

29、le Inflatable boats:Gbe Part 1: Boats with a maximum motor power rating of 4,5 kWGbe Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusiveGbe Part 3: Boats with a maximum motor power rating of 15 kW and greaterAnnexes A and B of this part of ISO 6185 are for information only.S

30、ANS 553-3:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO 6185-3:2001(E)vi ISO 2001 All rights reservedIntroductionISO 6185 is subdivided into three parts as shown in Figure 1.It excludesGbe single-chambered boats,Gbe boats of buoyanc

31、y less than 1 800 N,Gbe boats made from unsupported materials of more than 12 kN inflated buoyancy and powered by motorsexceeding 4,5 kW andGbe boats greater than 8 m in overall length.It is not applicable toGbe aquatic toys, andGbe inflatable liferafts.Part 1:Type I Boats propelled exclusively by m

32、anual means.Type II Powered boats not exceeding 4,5 kW.Type III Canoes and kayaks.Type IV Sail craft with a maximum sail area of 6 m2.Part 2:Type V Powered boats of 4,5 kW to 15 kW inclusive.Type VI Sail craft with sail area greater than 6 m2.Part 3:Type VII Powered boats of 15 kW and greater.Type V

33、lll Powered offshore boats of 75 kW and greater.SANS 553-3:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO 6185-3:2001(E) ISO 2001 All rights reserved viiFigure 1 Illustration of how the three parts of ISO 6185 are dividedSANS 553-3:2

34、008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .SANS 553-3:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .INTERNATIONAL STANDARD ISO 6185-3:2001(E) ISO 2001 All rights reserved

35、 1Inflatable boats Part 3:Boats with a maximum motor power rating of 15 kW and greater1 ScopeThis part of ISO 6185 specifies the minimum safety characteristics required for the design, materials to use,manufacture and testing of inflatable boats (including rigid inflatable boats) less than 8 m in ov

36、erall length with aminimum buoyancy of 1 800 N.This part of ISO 6185 is applicable to the following types of inflatable boats intended for use within the operatingtemperatures of 20 Cto+60C:Gbe Type VII: Inflatable boats capable of taking a motor power rating of 15 kW and greater;Gbe Type VIII: Infl

37、atable offshore boats capable of taking a motor power rating of 75 kW or greater and with astability factor greater than 250.NOTE 1 General arrangements of typical boats of Types VII and VIII are given in annexes A and B, respectively.NOTE 2 For boats with power ratings of 4,5 kW and less refer to I

38、SO 6185-1. For boats with power ratings of 4,5 kW to15 kW inclusive refer to ISO 6185-2.This part of ISO 6185 excludes single-chambered boats and boats made from unsupported materials, and is notapplicable to aquatic toys and inflatable liferafts.2 Normative referencesThe following normative documen

39、ts contain provisions which, through reference in this text, constitute provisions ofthis part of ISO 6185. For dated references, subsequent amendments to, or revisions of, any of these publicationsdo not apply. However, parties to agreements based on this part of ISO 6185 are encouraged to investig

40、ate thepossibility of applying the most recent editions of the normative documents indicated below. For undatedreferences, the latest edition of the normative document referred to applies. Members of ISO and IEC maintainISO 1817:1999, Rubber, vulcanized Determination of the effect of liquidsISO 2411

41、:2000, Rubber- or plastics-coated fabrics Determination of coating adhesionISO 3011:1997, Rubber- or plastics-coated fabrics Determination of resistance to ozone cracking under staticconditionsISO 4646:1989, Rubber- or plastics-coated fabrics Low-temperature impact testISO 4674:1977, Fabrics coated

42、with rubber or plastics Determination of tear resistanceISO 7000:1989, Graphical symbols for use on equipment Index and synopsisSANS 553-3:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO 6185-3:2001(E)2 ISO 2001 All rights reservedISO

43、 8665:1994, Small craft Marine propulsion motors and systems Power measurements and declarationsISO 8848:1990, Small craft Remote steering systemsISO 8849:1990, Small craft Electrically operated bilge pumpsISO 9097:1991, Small craft Electric fansISO 9775:1990, Small craft Remote steering systems for

44、 single outboard motors of 15 kW to 40 kW powerISO 10088:2001, Small craft Permanently installed fuel systems and fixed fuel tanksISO 10133:2000, Small craft Electrical systems Extra-low-voltage d.c. installationsISO 10592:1994, Small craft Hydraulic steering systemsISO 11105:1997, Small craft Venti

45、lation of petrol motor and/or petrol tank compartmentsISO 11192:1), Small craft Graphical symbolsISO 11591:2000, Small craft, engine driven Field of vision from helm positionISO 11592:2001, Small craft of hull length less than 8 m Determination of maximum propulsion power ratingISO 12215-1:2000, Sma

46、ll craft Hull construction and scantlings Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminateISO 15652:1), Small craft Remote steering systems for inboard mini jet boatsColreg 72, Convention on the international regulations for preventing collisions at sea3 Terms a

47、nd definitionsFor the purposes of this part of ISO 6185, the following terms and definitions apply.3.1inflatable boatbuoyant structure (hull), achieving all or part of its intended shape and buoyancy by the medium of inflation andwhich is intended for the transportation of people and/or loads on the

48、 water, and where the design and shape of itgives it the capability of withstanding forces and movements arising from sea conditions3.2rigid inflatable boatRIBinflatable boat (3.1) but the lower part of the hull constructed as a rigid unit and the topsides (inflatable hull)achieving its intended sha

49、pe and buoyancy (or part thereof) by the medium of inflation3.3buoyancy of the boatvolume of any chamber, which forms the inflatable hull, and any other chamber which is permanently fixed to it1) To be published.SANS 553-3:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO 6185-3:2001(E) ISO 2001 All rights reserved 33.4buoyancy of a RIBthe buoyancy comprising, for calculation purposes, in addition to the inflated buoyancy, t