SANS 3834-6-2009 Quality requirements for fusion welding of metallic materials Part 6 Guidelines on implementing ISO 3834《金属材料氧炔焊的质量要求 第6部分 ISO 3834的实施指南》.pdf

《SANS 3834-6-2009 Quality requirements for fusion welding of metallic materials Part 6 Guidelines on implementing ISO 3834《金属材料氧炔焊的质量要求 第6部分 ISO 3834的实施指南》.pdf》由会员分享，可在线阅读，更多相关《SANS 3834-6-2009 Quality requirements for fusion welding of metallic materials Part 6 Guidelines on implementing ISO 3834《金属材料氧炔焊的质量要求 第6部分 ISO 3834的实施指南》.pdf（32页珍藏版）》请在麦多课文档分享上搜索。

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-22420-2 SANS 3834-6:2009Edition 1ISO/TR 3834-6:2007Edition 1SOUTH AFRICAN NATIONAL STANDARD Quality requirements for fusion welding of met

4、allic materials Part 6: Guidelines on implementing ISO 3834 This national standard is the identical implementation of ISO/TR 3834-6:2007 and is adopted with the permission of the International Organization for Standardization. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private

5、 Bag X191 Pretoria 0001Tel: +27 12 428 7911 Fax: +27 12 344 1568 www.sabs.co.za SABS SANS 3834-6:2009 Edition 1 ISO/TR 3834-6:2007 Edition 1 Table of changes Change No. Date Scope National foreword This South African standard was approved by National Committee SABS TC 44, Welding and allied processe

6、s, in accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in May 2009. Reference numberISO/TR 3834-6:2007(E)ISO 2007TECHNICAL REPORT ISO/TR3834-6First edition2007-02-15Quality requirements for fusion welding

7、 of metallic materials Part 6: Guidelines on implementing ISO 3834 Exigences de qualit en soudage par fusion des matriaux mtalliques Partie 6: Lignes directrices pour la mise en application de lISO 3834 SANS 3834-6:2009This s tandard may only be used and printed by approved subscription and freemail

8、ing clients of the SABS .ISO/TR 3834-6:2007(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer per

9、forming the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this

10、PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central

11、 Secretariat at the address given below. ISO 2007 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at t

12、he address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2007 All rights reservedSANS 3834-6:2009This s tandard may

13、 only be used and printed by approved subscription and freemailing clients of the SABS .ISO/TR 3834-6:2007(E) ISO 2007 All rights reserved iiiContents Page Foreword iv Introduction v 1 Scope . 1 2 Normative references . 1 3 Abbreviated terms 1 4 Using ISO 3834 2 4.1 General. 2 4.2 Product standards

14、2 4.3 Purchasers and users 2 4.4 Quality management systems in accordance with ISO 9001 . 2 4.5 Quality management systems other than ISO 9001 2 4.6 Manufacturers . 2 5 Incorporating ISO 3834 in product standards .2 6 Using other documents with ISO 3834 . 3 7 Documentation and quality systems 3 7.1

15、Documentation 3 7.2 Quality system 4 8 Selecting the level of quality requirements . 6 9 Implementation in fabrication 8 9.1 General guidelines for implementation 8 9.2 Organization 11 10 Interpretation of particular clauses in ISO 3834 11 10.1 Requirements review and technical review . 11 10.2 Sub-

16、contracting 11 10.3 Welding coordination . 12 10.4 Equipment . 14 10.5 Welding activities 15 10.6 Storage of parent metal 15 10.7 Calibration and validation 15 10.8 Identification and traceability 16 11 Assessment and certification 16 Annex A (informative) Examples of documents for control of weldin

17、g-related activities 17 Bibliography . 20 SANS 3834-6:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO/TR 3834-6:2007(E) iv ISO 2007 All rights reservedForeword ISO (the International Organization for Standardization) is a worldwide fe

18、deration of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that com

19、mittee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accord

20、ance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard require

21、s approval by at least 75 % of the member bodies casting a vote. In exceptional circumstances, when a technical committee has collected data of a different kind from that which is normally published as an International Standard (“state of the art”, for example), it may decide by a simple majority vo

22、te of its participating members to publish a Technical Report. A Technical Report is entirely informative in nature and does not have to be reviewed until the data it provides are considered to be no longer valid or useful. Attention is drawn to the possibility that some of the elements of this docu

23、ment may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO/TR 3834-6 was prepared by Technical Committee ISO/TC 44, Welding and allied processes, Subcommittee SC 10, Unification of requirements in the field of metal welding. ISO/TR

24、3834 consists of the following parts, under the general title Quality requirements for fusion welding of metallic materials: Part 1: Criteria for the selection of the appropriate level of quality requirements Part 2: Comprehensive quality requirements Part 3: Standard quality requirements Part 4: El

25、ementary quality requirements Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 Part 6: Guidelines on implementing ISO 3834 Technical Report Requests for official interpretations of any aspect of this part

26、of ISO 3834 should be directed to the Secretariat of ISO/TC 44/SC 10 via your national standards body, a complete listing of which can be found at http:/www.iso.org. SANS 3834-6:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO/TR 3834-

27、6:2007(E) ISO 2007 All rights reserved vIntroduction Welding is a special process in that the final result may not be able to be verified by testing. The quality of the weld is manufactured into the product, not inspected. This means that welding normally requires continuous control or that specific

28、 procedures be followed, or both. ISO 3834 deals with quality requirements in welding and has been prepared in order to identify those controls and procedures. ISO 3834 is not a quality system standard intended to take the place of ISO 9001, but a useful, additional tool for use when ISO 9001 is app

29、lied by manufacturers, in which case the meeting of its requirements needs to be recorded in certificates or documentation. However, ISO 3834 can be used independently of ISO 9001. ISO 3834 is intended for the fusion welding of metallic materials, and its application is independent of the products m

30、anufactured. However, its principles and many of its detailed requirements are also relevant for other welding and welding-related processes. Among other International Standards covering resistance welding and thermal spraying are ISO 14554 and ISO 14922, respectively. One of the aims of ISO 3834 is

31、 to define requirements in the field of welding so that contracting parties or regulators do not have to do this themselves. A reference to a particular part of ISO 3834 should be sufficient to demonstrate the capabilities of the manufacturer to control welding activities for the type of work being

32、done. This concept also applies to committees responsible for drafting product standards. ISO 3834 does not in itself require external assessment or certification. However, assessments by customers and certification by independent bodies are growing trends in commercial relations and the standard ca

33、n serve as a basis for these purposes, as well as for the demonstration of performance by those manufacturers implementing it. SANS 3834-6:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .SANS 3834-6:2009This s tandard may only be used and

34、 printed by approved subscription and freemailing clients of the SABS .TECHNICAL REPORT ISO/TR 3834-6:2007(E) ISO 2007 All rights reserved 1Quality requirements for fusion welding of metallic materials Part 6: Guidelines on implementing ISO 3834 1 Scope This part of ISO 3834 gives guidelines for the

35、 implementation of requirements given in the other parts of ISO 3834, and is intended to help manufacturers and users select that part of ISO 3834 appropriate to their needs. It is expected that they will already be familiar with ISO 3834 as a whole. 2 Normative references The following referenced d

36、ocuments are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 3834-1:2005, Quality requirements for fusion welding of metallic materi

37、als Part 1: Criteria for the selection of the appropriate level of quality requirements ISO 3834-2, Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements ISO 3834-3, Quality requirements for fusion welding of metallic materials Part 3: Standard qual

38、ity requirements ISO 3834-4, Quality requirements for fusion welding of metallic materials Part 4: Elementary quality requirements ISO 3834-5, Quality requirements for fusion welding of metallic materials Part 5: Documents with which it is necessary to conform to claim conformity to the quality requ

39、irements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 3 Abbreviated terms For the purposes of this document, the following abbreviated terms apply. IWE international welding engineer IWS international welding specialist IWT international welding technologist NDT non-destructive testing PWHT post-weld hea

40、t treatment SANS 3834-6:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO/TR 3834-6:2007(E) 2 ISO 2007 All rights reservedpWPS preliminary welding procedure specification WI work instruction WPQR welding procedure qualification record W

41、PS welding procedure specification 4 Using ISO 3834 4.1 General ISO 3834-1 provides criteria for the selection and use of ISO 3834 as a whole. The following subclauses identify different ways whereby the manufacturer may select or be required to adopt ISO 3834. 4.2 Product standards Where product st

42、andards require control of fusion welding, ISO 3834 should be used to organize those welding activities. Product standards where compliance with ISO 3834 is required include EN 1090, EN 12732, EN 12952, EN 13445 and EN 15085. 4.3 Purchasers and users Purchasers and users of welded products may speci

43、fy in contract documents that manufacturers demonstrate their competence by compliance with ISO 3834. 4.4 Quality management systems in accordance with ISO 9001 Since ISO 9001 does not include specific requirements for welding activities, ISO 3834-2, ISO 3834-3 and ISO 3834-4 should be used. 4.5 Qua

44、lity management systems other than ISO 9001 For welding activities in quality management systems other than ISO 9001 that do not include specific requirements for welding activities, ISO 3834-2, ISO 3834-3 and ISO 3834-4 should be used. 4.6 Manufacturers Whenever manufacturers wish to give evidence

45、of their competence in fusion welding activities, the appropriate part of ISO 3834 should be used. 5 Incorporating ISO 3834 in product standards An important group of users of ISO 3834 is the committees that draft product standards at the international, regional and national levels. ISO 3834-2, ISO

46、3834-3 and ISO 3834-4 provide a range of quality requirements for welding. Committees drafting product standards are encouraged to select a part, or parts, of ISO 3834 that provide the appropriate quality requirements for the products to be manufactured, taking account of the selection criteria give

47、n in ISO 3834-1:2005, Clause 5. Each part of ISO 3834 is designed to provide a complete set of quality requirements; additional requirements should not need to be specified unless very compelling reasons exist. In case of doubt, or where additional requirements are being considered, consultation wit

48、h ISO/TC 44/SC 10 is recommended. SANS 3834-6:2009This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO/TR 3834-6:2007(E) ISO 2007 All rights reserved 3Where welding is involved in the manufacture of a product, the standards committee may defin

49、e the documents to be applied or else take them from the ISO documents specified in ISO 3834-5. The committee should also select the appropriate quality requirement standard or standards to be applied. Where a series of levels exist in the ISO documents in ISO 3834-5, e.g. for welding procedure qualification, it would be satisfactory for the standardization committee to select only those that would be acceptable. The development of tables linking parts of ISO 3834 (with or without other quality-related standards such as