SANS 301443-2008 Satellite Earth Stations and Systems (SES) Harmonized EN for Very Small Aperture Terminal (VSAT) Transmit-only transmit-and-receive receive-only satellite earth sten.pdf

《SANS 301443-2008 Satellite Earth Stations and Systems (SES) Harmonized EN for Very Small Aperture Terminal (VSAT) Transmit-only transmit-and-receive receive-only satellite earth sten.pdf》由会员分享，可在线阅读，更多相关《SANS 301443-2008 Satellite Earth Stations and Systems (SES) Harmonized EN for Very Small Aperture Terminal (VSAT) Transmit-only transmit-and-receive receive-only satellite earth sten.pdf（66页珍藏版）》请在麦多课文档分享上搜索。

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-21616-0 SANS 301443:2008Edition 2ETSI EN 301443:2006Edition V1.3.1SOUTH AFRICAN NATIONAL STANDARD Satellite Earth Stations and Systems (SE

4、S); Harmonized EN for Very Small Aperture Terminal (VSAT); Transmit-only, transmit-and-receive, receive-only satellite earth stations operating in the 4 GHz and 6 GHz frequency bands covering essential requirements under article 3.2 of the RHarmonized EN for Very Small Aperture Terminal (VSAT);Trans

5、mit-only, transmit-and.receive,receive-only satellite earth stations operating in the 4 GHzand 6 GHz frequency bands covering essential requirementsunder article 3m2 of the R Essential, or potentially Essential, IPRs notified to ErSI inrespect ofErSI standards“, which is available from the ETSI Secr

6、etariat. Latest updates are available on the ETSI Webserver (http:/webapp.etsi.org/IPR/home.asp).Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guaranteecan be given as to the existence ofother IPRs not referenced in ETSI SR 000 314 (or th

7、e updates on the ETSI Webserver) which are, or may be, or may become, essential to the present document.ForewordThis Candidate Harmonized European Standard (Telecommunications series) has been produced by ETSI TechnicalCommittee Satellite Earth Stations and Systems (SES).The present document has bee

8、n produced by ETSI in response to a mandate from the European Commission issuedunder Directive 98/34/EC 4 (as amended) laying down a procedure for the provision ofinformation in the field oftechnical standards and regulations.The present document is intended to become a Harmonized Standard, the refe

9、rence ofwhich will be published in theOfficial Journal ofthe European Communities referencing the Directive 1999/5/EC ofthe European Parliament and ofthe Council of9 March 1999 on radio equipment and telecommunications terminal equipment and the mutualrecognition oftheir conformity (“the R(Scoped by

10、 frequency and/or equipment typeU W uRadio Product EMCEN 301 489 multi-part EMC standardGeneric and product standards also notified under EMC DirectiveI II = = = = = = = = = = = = = = - = = = = = = = I1 - If needed, new standards for human exposure to I1 Electromagnetic Fields, I1 - if needed, new s

11、tandards for acoustic safety 11=1I IStandards also notified under LV Directive.II.IINon-TTE =+=-Non-radio=l!IlIIil Figure 1: Modular structure for the various standards used under the Rit provides scope for standards to be added:under article 3.2 when new frequency bands are agreed; orunder article

12、3.3 should the Commission take the necessary decisions;without requiring alteration ofstandards that are already published;it clarifies, simplifies and promotes the usage ofHarmonized Standards as the relevant means ofconformityassessment.Remarks on the present documentThe determination ofthe parame

13、ters of the user earth stations using a given geo-stationary satellite for the protection ofthe spectrum allocated to that satellite, is considered to be under the responsibility ofthe satellite operator or thesatellite network operators. For this reason the requirement on the cross polarization dis

14、crimination which was inTBR 043 (see bibliography) has not been copied in the present document and inter-modulation limits inside the band5,850 GHz to7,075 GHz are to be determined by system design and are subject to satellite operator specifications.The requirements have been selected to ensure an

15、adequate level ofcompatibility with other radio services. The levels,however, do not cover extreme cases which may occur in any location but with a low probability ofoccurrence.The present document may not cover those cases where a potential source ofinterference which is producingindividually repea

16、ted transient phenomena or a continuous phenomenon is present, e.g. a radar or broadcast site in thenear vicinity. In such a case it may be necessary to use special protection applied to either the source ofinterference, orthe interfered part or both.The present document does not contain any require

17、ment, recommendation or information about the installation of theVSAT.All parts ofthe indoor unit related to reception, processing and presentation ofthe received information except thecontrol channel are not within the scope ofthe present document. The syntax ofthe control channel messages is outsi

18、dethe scope ofthe present document.ETSISANS 301443:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .1 Scope10 ETSI EN 301 443 V1.3.1 (2006-02)The present document applies to any Very Small Aperture Terminal (VSAT) which has the following c

19、haracteristics: the VSAT is operating in one or more frequency ranges within the following bands allocated to the FixedSatellite Service (FSS), shared with other services, e.g. the Fixed Service (FS) and the Mobile Service (MS):5,850 GHz to 7,075 GHz (earth-to-space);3,400 GHz to 4,200 GHz (space-to

20、-earth); the VSAT uses linear or circular polarization; the VSAT operates through a geostationary satellite at least 30away from any other geostationary satelliteoperating in the same frequency band and covering the same area; the VSAT antenna diameter does not exceed 7,3 m, or equivalent effective

21、area; the VSAT is either:a transmit-only VSAT: designed for transmission-only ofradio-communications signals in the frequencyband (earth-to-space) specified above; ora transmit-and-receive VSAT: designed for transmission-and-reception ofradio-communications signalsin the frequency bands specified ab

22、ove; ora receive-only VSAT: designed for reception-only ofradio-communications signals in the frequencyband (space-to-earth) specified above; the VSAT is designed usually for unattended operation; the VSAT is operating as part ofa satellite network (e.g. star, mesh or point-to-point) used for the di

23、stributionand/or exchange ofinformation between users; the transmit-only and transmit-and-receive VSAT is controlled and monitored by a Centralized Control andMonitoring Function (CCMF). The CCMF is outside the scope ofthe present document.The present document applies to the VSAT with its ancillary

24、equipment and its various terrestrial ports, and whenoperated within the boundary limits ofthe operational environmental profile declared by the applicant and wheninstalled as required by the applicant by declaration or in the user documentation.The present document is intended to cover the provisio

25、ns ofDirective 1999/5/EC (R andb) the equipment cannot be used on a stand alone basis, to provide user functions independently ofthe VSAT;andc) the absence ofthe equipment does not inhibit the operation ofthe VSAT.applicant: manufacturer or his authorized representative within the European Community

26、 or the person responsible forplacing the apparatus on the marketcarrier-off radio state: radio state in which the VSAT may transmit and does not transmit any carrierNOTE 1: The phrase “the VSAT may transmit“ means that all the conditions for transmission are satisfied (e.g. in astate where transmis

27、sions are permitted and no failure detected).NOTE 2: The existence ofa “Carrier-off radio state depends on the system oftransmission used. For VSATsdesigned for continuous transmission mode there may be no “Carrier-off radio state.ETSISANS 301443:2008This s tandard may only be used and printed by ap

28、proved subscription and freemailing clients of the SABS .12 ETSI EN 301 443 V1.3.1 (2006-02)carrier-on radio state: radio state in which the VSAT may transmit and transmits a carrierCentralized Control and Monitoring Functions (CCMF): set offunctional entities that, at system level, monitor andcontr

29、ol the correct operation ofall transmit VSAT in a networkControl Channel (CC): channel or channels by which VSAT receive control information from the CCMFEIRPmax: maximum e.i.r.p capability ofthe VSAT as declared by the applicantNOTE: The applicant may declare different values ofEIRP max for each co

30、mbination ofoccupied bandwidth andtransmission parameters (see clause 4.1.3).emissions disabled radio state: radio state in which the VSAT must not transmit a carrierNOTE: This radio state only applies in certain CMF states as defined in clause 4.1.4. (e.g. before systemmonitoring pass, before the c

31、ontrol channel is received, when a failure is detected, when the VSAT iscommanded to disable). The “Emissions disabled“ radio state requires lower unwanted emissions than the“Carrier-off radio state.environmental profile: range ofenvironmental conditions under which equipment within the scope ofthe

32、presentdocument is required to comply with the provisions ofthe present documentexternal control channel: control channel which is either:(i) carried by the VSAT network via the same or another satellite, but not within the internal protocol oftheVSAT system; or(ii) carried by the PSTN or some other

33、 means.external response channel: response channel which is either:(i) carried by the VSAT network via the same or another satellite, but not within the internal protocol oftheVSAT system; or(ii) carried by the PSTN or some other means.fmin: lower bound ofthe VSAT transmit frequency range declared b

34、y the applicantfmax: upper bound ofthe VSAT transmit frequency range declared by the applicantNOTE: In the case ofequipment designed to operate over more than one contiguous frequency range a separatefminand fmaxmay be defined to each range.indoor unit: is composed ofthat part ofthe VSAT which is no

35、t part ofthe outdoor unit. It is generally installed inside abuilding and is connected to the outdoor unit. The connection cable between the outdoor and indoor unit is consideredpart ofthe indoor unitintegral antenna: antenna which may not be removed during the tests according to the applicants stat

36、ementinternal control channel: control channel which is carried by the VSAT network via the same satellite as used fortransmission ofuser data and within the internal protocol structure ofthe VSAT systeminternal response channel: response channel which is carried by the VSAT network via the same sat

37、ellite as used fortransmission ofuser data and within the internal protocol structure ofthe VSAT systemnetwork: in the present document a network is any network configuration including star, mesh and point-to-pointconfigurationsnominated bandwidth: bandwidth ofthe VSAT radio frequency transmission i

38、s nominated by the applicantNOTE 1: The nominated bandwidth is centred on the transmit frequency and does not exceed 5 times the occupiedbandwidth.ETSISANS 301443:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .13 ETSI EN 301 443 V1.3.1 (

39、2006-02)NOTE 2: The nominated bandwidth is wide enough to encompass all spectral elements ofthe transmission whichhave a level greater than the specified spurious radiation limits. The nominated bandwidth is wide enoughto take account ofthe transmit carrier frequency stability. This definition is ch

40、osen to allow flexibilityregarding adjacent channel interference levels which will be taken into account by operational proceduresdepending on the exact transponder carrier assignment situation.occupied Bandwidth (Bo): for a digital modulation scheme - the width ofthe signal spectrum 10 dB below the

41、maximum inband density. For an analogue modulation scheme - the width ofa frequency band such that, below thelower and above the upper frequency limits, the mean power emitted is equal to 0,5 % ofthe total mean power oftheemissionoutdoor unit: part ofthe VSAT intended to be installed outdoor, as dec

42、lared by the applicant, or as indicated in the userdocumentationThe outdoor unit usually comprises three main parts:a) the antenna sub-system which converts the incident radiation field into a guided wave and vice versa;b) the Low Noise Block (LNB) down converter, which is a device that amplifies, w

43、ith very low internal noise,the received signals in the Radio Frequency (RF) band and converts them to intermediate frequencies;c) the upconverter and the power amplifier which convert from the intermediate frequency to RF and amplify thelow level RF signals for transmission through the antenna subs

44、ystem.NOTE: The installation equipment (means ofattachment) is outside the scope ofthe present document. However,the antenna structures and other components directly mounted on the antenna and forming an integral partofit, are subject to the specifications ofthe present document.removable antenna: a

45、ntenna which may be removed during the tests according to the applicants statementResponse Channel (RC): channel by which VSAT transmit monitoring information to the CCMFspurious radiation: any radiation outside the nominated bandwidthNOTE: For a receive-only VSAT there is no nominated bandwidth the

46、refore any radiation is a spurious radiation.transmission disabled state: VSAT is in this state when it is not authorized by the CCMF to transmittransmit VSAT: VSAT capable ofbeing used either for transmission only, or for transmission and receptionVSAT: the complete VSAT equipment, comprising the o

47、utdoor unit and the indoor unit including the connectioncable(s) between the units3.2 AbbreviationsFor the purposes ofthe present document, the following abbreviations apply:CCCCFCCMFCISPRCMFCCRCVEIRP, e.i.r.pENEUTFECFSFSSHPAITULNAControl ChannelControl Channel reception FailureCentralized Control a

48、nd Monitoring Functions(Comite International Special des Perturbations Radioelectriques) International Special Committeeon Radio InterferenceControl and Monitoring FunctionControl Channel correctly ReceivedControl VariableEquivalent Isotropically Radiated PowerEuropean StandardEquipment Under TestFo

49、rward Error CorrectionFixed ServiceFixed Satellite ServiceHigh Power AmplifierInternational Telecommunications UnionLow Noise AmplifierETSISANS 301443:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .LNBLamodemMSPSTNR“Checking“;“Stand-by“; and“In-service“ .The four states ofthe VSAT are represented in figure 2 and are used in clause 4.2.6 for the specification ofthe class ACMF.In the “Out-of-service“, “Checking“ and “Stand-by“ states the VSAT is not allowed to transmit. In the “I