SANS 1118-10-2008 School clothing Part 10 Jerseys and cardigans《校服 第10部分 运动衫和对襟毛衣》.pdf

《SANS 1118-10-2008 School clothing Part 10 Jerseys and cardigans《校服 第10部分 运动衫和对襟毛衣》.pdf》由会员分享，可在线阅读，更多相关《SANS 1118-10-2008 School clothing Part 10 Jerseys and cardigans《校服 第10部分 运动衫和对襟毛衣》.pdf（15页珍藏版）》请在麦多课文档分享上搜索。

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-21161-5 SANS 1118-10:2008Edition 1.4Any reference to SABS 1118-10 is deemedto be a reference to this standard(Government Notice No. 1373 o

4、f 8 November 2002)SOUTH AFRICAN NATIONAL STANDARD School clothing Part 10: Jerseys and cardigans Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 1568 international code + 27 12 www.stansa.co.za Standards South Africa SANS

5、 1118-10:2008 Edition 1.4 Table of changes Change No. Date Scope Amdt 1 1988 Amended to change the title of the Afrikaans version, to add an item to the note to section 1 and to include an applicable standard. Amdt 2 2000 Amended to delete a reference, to align this part of SABS 1118 with the latest

6、 edition of SABS 1118-1 and to update the test methods used. Amdt 3 2001 Amended to substitute reference to material test methods that have been replaced by internationally adopted methods. Amdt 4 2008 Amended to change the designation of SABS standards to SANS standards and to update the referenced

7、 standards. Foreword This South African standard was approved by National Committee StanSA SC 5110.05B, Clothing and made-up articles School clothing, in accordance with procedures of Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. This document was published in February

8、 2008. This document supersedes SABS 1118-10:2001 (edition 1.3). A vertical line in the margin shows where the text has been technically modified by amendment No. 4. SANS 1118 consists of the following parts under the general title School clothing: Part 1: General requirements for school clothing. P

9、art 2: Blazers. Part 3: Trousers and shorts. Part 4: Shirts. Part 5: Deleted by amendment No. 1. Part 6: Dresses, tunics and gyms. Part 7: Girls slacks and skirts. Part 9: Knee-high stockings and ankle socks. Part 10: Jerseys and cardigans. Part 11: Briefs. Part 12: Tracksuits. Part 13: Athletic wea

10、r. SANS 1118-10:2008 Edition 1.4 1 Contents Page Foreword 1 Scope . 3 2 Definitions 3 3 Materials . 4 4 Style, size and make 6 5 Packing, care-labelling and marking 9 6 Sampling and compliance with this part of SANS 1118 9 7 Inspection and methods of test 9 7.1 Inspection . 9 7.2 Knitted structure .

11、 9 7.3 Composition . 9 7.4 Mean wool fibre diameter . 9 7.5 Wales and courses per 10 cm . 9 7.6 Mass per unit area . 9 7.7 Dimensional changes on washing . 9 7.8 Colour fastness to light . 10 7.9 Colour fastness to washing 10 7.10 Colour fastness to perspiration 10 7.11 Colour fastness to dry-cleani

12、ng . 10 7.12 Resistance to pilling . 10 7.13 Bursting strength 10 7.14 Breaking strength of sewing threads 10 Appendix A Applicable standards 11 Appendix B Notes to purchasers . 12 Appendix C Additional information for the guidance of manufacturers . 12 SANS 1118-10:2008 Edition 1.4 2 This page is i

13、ntentionally left blank SANS 1118-10:2008 Edition 1.4 3 School clothing Part 10: Jerseys and cardigans 1 Scope 1.1 This part of SANS 1118 covers the requirements for the materials, size, and make of school jerseys and cardigans. NOTE a The standards referred to in this part of SANS 1118 are listed i

14、n appendix A. b) Requirements that must be specified by the purchaser and a requirement that must be agreed upon by the supplier and the purchaser are noted in appendix B. c) Additional information for the guidance of manufacturers is given in appendix C. d) Information regarding the verification of

15、 the quality of jerseys and cardigans produced to this part of SANS 1118 and a sampling plan that could be used to assess compliance of a lot of jerseys or cardigans with this part of SANS 1118 are given in annex B of SANS 1118-1. Amdt 1; amdt 2 2 Definitions 2.1 For the purposes of this part of SAN

16、S 1118 the definitions given in SANS 1118-1 and the following definitions shall apply: cardigan a knitted garment having long sleeves, and a two-piece front that fastens with buttons or a slide fastener jersey a knitted garment having long sleeves, and a one-piece front nominal subject to the tolera

17、nces normal to good manufacturing practice size designation the numerical value of the chest/bust girth, in centimetres, of the intended wearer SANS 1118-10:2008 Edition 1.4 4 3 Materials 3.1 Knitted fabric The knitted fabric shall consist exclusively of acrylic yarns, or of wool yarns, or of a blen

18、d of wool and other fibres, as specified by the purchaser, and shall comply with the requirements of table 1 or table 2, as relevant. The cuff and waistband ribbing shall each be of one of the structures given in the appropriate table, as specified (in both cases) by the purchaser. Table 1 Knitted f

19、abric requirements: acrylic garments 1 2 3 Property Requirement Test method subsection Knitted structure 7.2 Body and sleeves Neckband Strapping .Cuffs Waistband .1 1 rib 1 1 rib 1 1 rib 2 1 or 2 2 rib 2 1 or 2 2 rib Composition, % 7.3 Acrylic 100 Wales per 10 cm, min. 7.5 Body and sleeves Neckband

20、48 48 Strapping, knitted with a) one end of yarn .b) two ends of yarn 48 45 Cuffs and waistband 54 Courses per 10 cm, min. 7.5 Body and sleeves Neckband 83 92 Strapping, knitted with a) one end of yarn .b) two ends of yarn 75 60 Cuffs and waistband 90 Mass per unit area, g/m2, min. . 335 7.6 Dimensi

21、onal changes on washing, %, max. 7.7 Length .Area .4 6 Colour fastness to light, rating, min. . 5 7.8 Colour fastness to washing, rating, min. 7.9 Change in colour .Staining of transfer cloths 4 4 Colour fastness to perspiration, rating, min. 7.10 Change in colour .Staining of transfer cloths 4 4 Re

22、sistance to pilling, rating, min. 3 7.12 Bursting strength, kPa, min. . 600 7.13 SANS 1118-10:2008 Edition 1.4 5 Table 2 Knitted fabric requirements: wool and wool-containing garments 1 2 3 Property Requirement Test method subsection Knitted structure 7.2 Body and sleeves Neckband Strapping .Cuffs W

23、aistband .1 1 rib 1 1 rib 1 1 rib 2 1 or 2 2 rib 2 1 or 2 2 rib Composition, % 7.3 a) New wool b) Blended: new wool, min. .other fibres, max. .100 60 40 Mean wool fibre diameter, m 22,5 to 27,0 7.4 Wales per 10 cm, min. 7.5 Body and sleeves Neckband Strapping .Cuffs wand waistband .62 62 62 54 Cours

24、es per 10 cm, min. 7.5 Body and sleeves Neckband Strapping .Cuffs wand waistband .95 95 95 100 Mass per unit area, g/m2, min. . 440 7.6 Dimensional changes on washing, %, max. 7.7 Length .Area .5 8 Colour fastness to light, rating, min. . 5 7.8 Colour fastness to washing, rating, min. 7.9 Change in

25、colour .Staining of transfer cloths 4 4 Colour fastness to perspiration, rating, min. 7.10 Change in colour .Staining of transfer cloths 4 4 Colour fastness to dry cleaning, rating, min. 7.11 Change in colour .Staining of transfer cloths 4 4 Resistance to pilling, rating, min. 3 7.12 Bursting streng

26、th, kPa, min. . 600 7.13 3.2 Supplementary materials and components 3.2.1 General The supplementary materials and components shall comply with the relevant requirements laid down in subclause 4.2 of SANS 1118-1. Amdt 2 SANS 1118-10:2008 Edition 1.4 6 3.2.2 Stay tape In addition, the stay tape shall

27、comply with the requirements for type TA 6 of SANS 877, and its colour shall be an acceptable match to that of the knitted fabric. 3.2.3 Sewing threads In addition, the breaking strength, determined in accordance with 7.14, of needle overlocking threads and sewing threads for linking shall be at lea

28、st 15 N. 3.3 Colours of materials and components The colour(s) of the material(s) and components shall be an acceptable match to the required colour(s) as agreed upon between the purchaser and the supplier. Amdt 2 4 Style, size, and make 4.1 Style The style shall be that of a cardigan or a jersey, a

29、nd shall have one of the following types of neck as specified (in both cases) by the purchaser: a) Cardigans 1) Crew-neck 2) V-neck b) Jerseys 1) Crew-neck 2) V-neck 3) Turtle-neck 4) Polo-neck 4.2 Size designation and garment measurements The jerseys and cardigans shall be supplied in one (or more)

30、 of the size designations given in column 1 of table 3 or table 4 (as relevant), and their measurements shall conform to the appropriate values given in columns 2-6 of the relevant table. Both the size designation(s) and whether the garments are to be for girls or boys shall be as specified by the p

31、urchaser. SANS 1118-10:2008 Edition 1.4 7 Table 3 Size designation and garment measurements for jerseys and cardigans for girls (see figure 1) 1 2 3 4 5 6 Garment measurements cm, min. Sleeve length Bust girth Back length Sleeve girth Overarm Underarm Size designation 2 A to B C to D 2 B to G C to E

32、 B to F 50-54 56-60 62-66 56 62 68 42 43 46 26 28 30 55 57 60 31 33 34 68-72 74-78 80-84 74 80 86 48 50 54 32 34 36 64 68 72 38 40 42 86-90 92-96 98-102 92 98 104 57 59 59 38 40 42 75 80 83 44 46 47 104-108 110-114 110 116 60 60 44 46 84 85 48 49 Table 4 Size designation and garment measurements for

33、 jerseys and cardigans for boys (see figure 1) 1 2 3 4 5 6 Garment measurements cm, min. Sleeve length Chest girth Back length Sleeve girth Overarm Underarm Size designation 2 A to B C to D 2 B to G C to E B to F 50-54 56-60 62-66 56 62 68 42 43 46 26 28 30 55 58 60 31 33 34 68-72 74-78 80-84 74 80

34、86 49 53 57 32 34 36 66 70 74 38 42 43 86-90 92-96 98-102 92 98 104 61 62 63 38 40 42 78 82 86 46 48 49 104-108 110-114 110 116 65 66 44 46 88 90 51 53 4.3 Make 4.3.1 General The body, sleeves, neckbands, cuffs, waistbands, and, where relevant, the strapping of the cardigans and jerseys shall be of

35、a fabric that complies with the requirements given in table 1 or table 2, as relevant. Sleeves shall be raglan or set-in, as specified by the purchaser, and shall be one-piece sleeves that are seamed under the arm and tapered to the cuff. SANS 1118-10:2008 Edition 1.4 8 The shoulders of garments wit

36、h set-in sleeves shall be stayed with a) an appropriate length of stay tape (see 3.2.2); or b) an appropriate length of the knitted fabric (that has been cut parallel to the course direction) of nominal width 6 mm. 4.3.2 Depth of waistband and length of cuffs The depth of the waistband and the lengt

37、h of cuffs shall be as specified by the purchaser, and shall, in both cases, be in the range 60 mm to 100 mm, except that, in the case of sleeves with turn-back cuffs, the cuff length shall be as agreed between the purchaser and the supplier. 4.3.3 Neckband The neckband shall be sewn or linked to th

38、e neck opening and shall be as follows: a) Crew-neck cardigans, and crew-neck and V-neck jerseys. Folded width: 25-30 mm. b) Turtle-neck jerseys. Folded width: 30-35 mm. c) Polo-neck jerseys. Overall (single) width: 80-150 mm. 4.3.4 Front opening of cardigans a) Crew-neck cardigans. Strapping of fol

39、ded or single width at least 25 mm or a slide fastener shall have been sewn or, in the case of strapping, linked to the front edges of the cardigan. When a slide fastener is used, the raw edges of the knitted fabric shall have been overlocked and turned-in before the sewing-in of the slide fastener.

40、 b) V-neck cardigans. A continuous length of strapping of folded or single width at least 25 mm shall have been sewn or linked to the front edges and neck. 4.3.5 Depth of V-necks Unless otherwise specified by the purchaser, the base of the “V“ (see point H in figure 1) on a V-neck cardigan or jersey

41、 shall be in line with the base of the scye. 4.3.6 Buttonholes Buttonholes shall be of the shirt type with a bar at each end and shall be equidistantly spaced. The length shall be such as to accommodate acceptably the relevant button. 4.4 Stitches, seams, and stitchings 4.4.1 General All sewing shal

42、l be in accordance with SANS 10101. 4.4.2 Stitches Overlocking and seaming stitch type 504 to 507 or other acceptable type of stitch. SANS 1118-10:2008 Edition 1.4 9 4.4.3 Seams Seam type SSa or seam type SSh. 4.4.4 Number of stitches The number of stitches per 10 cm (for both seams and cover thread

43、) shall be 40 4 throughout. 5 Packing, care-labelling, and marking 5.1 The requirements of clause 5 of SANS 1118-1 shall apply. 6 Sampling and compliance with this part of SANS 1118 6.1 The requirements of clause 6 of SANS 1118-1 shall apply. 7 Inspection and methods of test 7.1 Inspection Visually

44、examine and measure (in accordance with SANS 10188a)each jersey or cardigan in the sample for compliance with all the requirements of sections 3 and 4 of this part of SANS 1118 for which tests to assess compliance are not given in 7.3-7.14 (inclusive). 7.2 Knitted structure Determine by visual exami

45、nation. 7.3 Composition Determine by microscopical examination and chemical analysis. 7.4 Mean wool fibre diameter Use SANS 5071. 7.5 Wales and courses per 10 cm Use SANS 5275. 7.6 Mass per unit area Use SANS 5385. 7.7 Dimensional changes on washing Use SANS 960, procedure D1. For acrylic garments,

46、use drying procedure F and tumble-dry at room temperature. For wool and wool containing garments, use drying procedure G. Amdt 2 a) SANS 10188, Standard methods of garment measurement. SANS 1118-10:2008 Edition 1.4 10 7.8 Colour fastness to light Use SANS 105-B02. Amdt 2 7.9 Colour fastness to washi

47、ng Use SANS 105-C10. Amdt 2; amdt 4 7.10 Colour fastness to perspiration Use SANS 105-E04. Amdt 2 7.11 Colour fastness to dry-cleaning Use SANS 105-D01. Amdt 2 7.12 Resistance to pilling Use the method given in ISO 12945-1 but use a test period of only 4 h. Amdt 4 7.13 Bursting strength Use SANS 139

48、38-1. Amdt 3 7.14 Breaking strength of sewing threads Use SANS 2062. Amdt 3 Figure 1 Garment measurements SANS 1118-10:2008 Edition 1.4 11 Appendix A Applicable standards Reference is made to the latest issues of the following standards: ISO 12945-1, Textiles Determination of fabric propensity to su

49、rface fuzzing and to pilling Part 1: Pilling box method. Amdt 4 SANS 105-B02/ISO 105-B02, Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test. Amdt 2 SANS 105-C10/ISO 105-C10, Textiles Tests for colour fastness Part C10: Colour fastness to washing with soap or soap and soda. Amdt 2; amdt 4 SANS 105-D01/ISO 105-D01, Textiles Tests for colour fastness Part D01: Colour fastness to dry cleaning. Amdt 2 SANS 105-E04/ISO 105-E04, Textiles Tests for