SAE USCAR-18-2016 USCAR-17 SUPPLEMENT (Revision 4).pdf

《SAE USCAR-18-2016 USCAR-17 SUPPLEMENT (Revision 4).pdf》由会员分享，可在线阅读，更多相关《SAE USCAR-18-2016 USCAR-17 SUPPLEMENT (Revision 4).pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、86 changed all references from plug and receptacle to male (pin) and female (receptacle.) 2-1-16 Document Name was FAKRA SMB RF CONNECTOR SUPPLEMENT Contents Table was Summary Contents Appendix C was Recommended 1. Scope Added and sealed automotive applications 1. Scope Changed applications from 3GH

2、z to 6GHz 1. Scope Changed to ensure interchangeability and added interoperability statement 2. Reference Added ISO 20860-1 Table 1 Table 1 Key Code N assigned to DSRC /VPM Table 1 Table 1 Key Code I Added VPM Table 1 Table 1 Key Code L assigned VPM Table 2 Added I2 & L2 assigned to VPM Table 2 Adde

3、d H2 & K2 Not Defined Section 3.1 Added unsealed male connector must meet dimensions shown in figure1, 2A and 2X Section 3.1 Added tolerance in figure 1 0.1 r 0.5 x 45q r 1 OR R 0.1 r 0.5 was 0.1 x 45q Section 3.1 Added Sealed Male Connector Must meet 3.1 and dimensions shown in figure 2B,2C and 2D

4、Section 3.1, 3.2 & 3.3 Notes: was Key: Figure 2A Notes a) (See Figure 2X) was (See Detail X) Section 3.1 Figure 2A was Figure 2 Section 3.1 Added Sealed Male Figures 2B, 2C and 2D Section 3.1 Renamed Detail to Figure Section 3.1 Figure 2A Added Note e Section 3.1 Figure 2X Added Contact Plating Note

5、 Section 3.2 Added must meet dimensions shown in figure 3A and 3Y SAE/USCAR-18 REVISION 4 Revised 2016-07 USCAR-17 SUPPLEMENT - 18 - 2-1-16 Section 3.2 Notes was Key and Figure 3A was Figure 3 Section 3.2 Figure 3Y was Detail Y Section 3.2 Figure 3A Added Note Z Section 3.2 Figure 3Y Added Contact P

6、lating Note Section 3.3 Added must meet dimensions shown in Figure 5 Section 3.4 Added must comply with figure 6 and Table 1 Section 3.4 Table 1 added Typical Usage DSRC and VPM Section 3.4 Table 1 Key Code N assigned to DSRC /VPM Section 3.4 Table 1 Key Code I Added VPM Section 3.4 Table 1 Key Code

7、 L assigned VPM Section 3.4 Table 2 Added I2 & L2 assigned to VPM Section 3.4 Table 2 Added H2 & K2 Not Defined Section 4.1 Added a potential application & section 4.2 was paragraph 4.2 Section 4.2 Added must meet dimensions shown in figure 7, 8 and table 2 Section 4.2 Updated Figure 7 Dimensions wa

8、s incomplete Section 4.2 Updated Figure 8 Dimensions was incomplete Section 4.3 Table 2 added applications, Notes and 4. Usage is recommended but not mandatory. Section 4.3 Note: was PCB Male designs are also requested Section 4.3 Table 2 Removed FAKRA in Usage Cavity One Section 5 Added The dimensi

9、ons of Figure 9 represent Section 5 All notes updated replaced “Jack” with “Male” All Relocated View & Table Descriptions Appendix A Removed Prepared by EWCAP Appendix B Removed Supplier title blocks from all Figures Appendix C Title was Recommended Clip Slot Dimensions 2-1-16 Appendix C Recommended Clip Slot was Delphi ESD00012